Crony S10 Solar CCTV Camera Instruction Manual
- June 6, 2024
- Crony
Table of Contents
Solar CCTV Camera
i-Cam+
The user guide is for reference only.
Screenshots displayed in this user’s guide of the”i-Cam＋” app may appear
differently than those cu「「ently featured in your app as frequent updates and
improvements.
APP INSTALLATION
(1.) Scan the following QR codes or search for”i-Cam+” from the AppStore(for iOS devices) or Google Play Store (for Android smartphones) to download and install the app.
http://app.ubianet.com/app/icamplus
APP REGISTRATION
(1.) Open the app then input your Email address then press ‘Register’. Check and select to agree on the agreement then your Email box will get a verification mail. ( For better user experience, please allow to open all permissions to avoid missing any notifications from the app.)
| (2.) Set the login password and confirm the login password.
Then press ‘Register’ to the next step. (For your password safety, the
password requires more than 8 characters plus a combination of letters)
---|---
(3.)We send a verification mail to you, go to your mailbox click the link to complete the verification.
| (4.) Enter your Email address, and password, click log in. (APP will auto- fill the account information)
---|---
WI-Fl CONNECTION
(1.) Press ‘Add Family’ then set the room or position as per reminders
| (2.) Enter your family name and then press ‘Next’
---|---
(3.) Input the necessary information just like Country, Province, then press
‘Done’
| (4.) Press ‘Add a device’ to add a smart device
(5.) Connect the device with a power supply, and make sure your mobile phone is connected to an available Wi-Fi Then press ‘Setup device’.
| (6.) After the power on the device, wait for the device bule LED are blinking Which means your device is in pairing mode
(7.) If the device blue is not blinking, please press the power/Call key to wake up the device first, then hold and press the RESET button until the blue indicator to lights up and then release. The device will reboot and enter the pairing state.
| (8.) Set the device name and select the device location before setup.
(9.) The app will input the WiFi, name automatically, please input the correct WiFi password. Then you can choose the ‘QR code configuration’ or ‘Sound wave configuration’
| (10.) QR code configuration: Select the QR code configuration then the mobile phone display a QR code. Use the device to scan to the QR code 10cm away from the mobile phone
4UBIA8ubia180182c6aa01a8c082c6aa01a8c0
(11.) The device will enter into the device list automatically. Setup success! The device is ready to use
| (12.) Notes about PIR detection *User can change the PIR detection
sensitivity in device settings. we recommend setting sensitivity at “Disabled”
or “Low” to reduce false alerts and save battery power in noisy environments*
Disabled: disabled PIR detection.
Low: delay 7 seconds PIR detects a moving
Medium: delay 5 seconds PIR detects a moving**
*High: delay 1 second PIR detects a moving.
AP mode (connection without Internet)
This feature is only used for the following devices:
- Download the APP: i-Cam+ (if you already downloaded it, please ignore this step)
- Operation steps of switching AP mode: install the battery on the device and power on, make sure that the indicator light on the front of the device is on, and use the matching looped needle inside the accessory package “press and hold” the AP/WiFi button of the device until the sound is heard
- Turn on the mobile phone to search for WiFi. At the beginning of” i-Cam+_∗∗∗∗∗∗∗ the connection password is 12345678 (Note: keep connected to this WiFi)
- Open the app: i-cam +, the connection is completed, and the screen can be viewed, and the video record can also be selected for playback
Connecting WiFi signals at the beginning of i-Cam+
| Open the App: 1-Cam+
---|---
Control Rotation
This feature is only used for the following devices:
- Open the app, and after entering the screen, as shown in Figure 1, press and hold the screen with your finger and slide to the left to switch to the control Button for camera rotation, as shown in Figure 2;
- “Click” the direction key to control the rotation of the equipment Due to the network, there is a slight delay in controlling the rotation camera, it’s a normal phenomenon
Cloud service & Face recognition
- Open the App, Find the setting button in the top right corner in “My Smart device”
- Click “cloud service” to ente「the purchase interface and purchase services according to your own needs
| 
---|---
|
USING THE APP
Click the “Calendar” icon on the right top corner, then choose the date to playback the videos from cloud storage.
| Choose the desired date to check all videos from the cloud.
---|---
SPECIAL NOTES!
- The device is equipped with a rechargeable lithium battery. The battery life will be affected by the device’s wake-up time and the number of wake-ups. Therefore, the HR sensor alarm detection function is used in an environment with a lot of people. It is recommended to turn off or set the device to low sensitivity to reduce device wake-up and call times extend battery life. When the battery is low, please charge the battery immediately.
- Keep the device in the range of your router. Make sure the device is placed close to the Wi-Fi router. If there have to be thick or insulated objects between the device and the Wi-Fi router, which may lead to a weak Wi-Fi signal, please make sure the Wi-Fi signal is at a good level before you start using the device.
- It is a delicate device with a low power consumption design. Every time the device is awakened and will work for a few seconds. After that, the device will enter standby mode to save power. You can set the work time in the app settings.
- Because mainland China does not receive Google’s system push messages, you need to open the app’s self-starting function on your phone to receive push messages.
- This device provides one month of free cloud storage. If you need to continue using value-added services after the trial period expires, you need to purchase them in the app.
- In the mobile phone settings, all permissions of the app should be turned on, including location permission, notification permission, APP keeping background running and starting, etc
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20cm the radiator
your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>