UGREEN CM492 AC1300 Dual-Band Wireless Adapter User Manual

June 6, 2024
UGREEN

UGREEN - logo

AC1300 Dual-Band Wireless Adapter
Model: CM492 I P/N: 50340

User manual

Package Contents

1 x AC1300 Dual-Band Wireless Adapter
lx Driver CD
1 X User Manual 1
x Warranty Card

Product Overview

UGREEN CM492 AC1300 Dual-Band Wireless Adapter - Product
Overview

2. LED Indicator
3. WPS Button

How to Use

UGREEN CM492 AC1300 Dual-Band Wireless Adapter - How to
UseUGREEN CM492 AC1300 Dual-Band
Wireless Adapter - How to Use 2

Software & Drive Installation

  1. Plug the device into the USB port of your PC;

  2. Insert the CD into the CD drive of your PC;
    Note: If the CD-ROM is unavailable on your computer, please go to UGREEN’s official website, find (Support]-(Down-load]-search 50340 (Product model) to download the drive.

  3. Double click Setup.exe and run it, then follow up the step to finish the installation;

  4. Once you finish the installation, the software “UGREEN Wi-Fi” would be available for you, you can use it to connect your network.

Connect Your Wi-Fi

Notes: There are 4 different ways for you to connect your Wi-Fi, you can choose any of it to connect; If you want to use WPS, make sure it is available on your router and you know how to enable it, or you could consult the dealer of your router.

a. Password Connection (Recommend)
In the UGREEN Wi-Fi interface, please choose your Wi-Fi network and type the correct password to use it.
b. WPS PBC — Button (Wi-Fi Password-free)

  1. Enable the WPS feature of your router;
  2. Press the WPS button in the adapter, the device enters WPS pairing mode when the LED flashes blue; (:)
  3. The LED stops flashing within 2 mins indicates the pairing is complete and the Wi-Fi connection is established.

Note: Once you enable WPS pairing, the signal will be propagated within 2 minutes. If the pairing fails, please re-enable WPS pairing for both router and adapter.
c. WPS PBC — Software (Wi-Fi Password-free)
Enable the WPS feature of your router, then press the\ button in UGREEN Wi-Fi, choose the WPS button connection, then connect it.
d . WPS PIN (Security Connection)
Enable the WPS feature of your router, then press the Ck` button in UGREEN Wi- Fi, choose PIN code connection, type the PIN code of your router to connect it.

Note: Different from password, the PIN code (8-digit long) is an internal code in the router for WPS connection ONLY. Please consult the dealer to acquire your PIN code.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals