Dongguan Huhe Interactive Information Technology RW10 Wireless Charging Mouse Pad Instruction Manual
- June 6, 2024
- Dongguan Huhe Interactive Information Technology
Table of Contents
Charging mouse pad manual
Product introduction
fantasy wireless charger is an intelligent product, with a simple design. and compatible with any mobile phone with Qi standard. Mobile phone is without a plug when charging, which is more convenient and efficient. It can bring you limitless life experience as well as a safe and free experience with wireless charging function.
Product Outline
Applicable Devices
- Devices with built-in wireless charging receiver(Nokia 15 20, LG, Nexus 5, and more)
- Devices with reserved wireless charging interface beside it battery(Samsung Galaxy S3, S4, S5, Note2, Note3, Note4, etc)
- Devices with wireless charging receiver in its protection case(iPhone5/5s,iPhone6,iPhone6 plus,etc)
Note: All devices must be Qi standard.
Instructions
-
Insert one end of the USB charging cable into the power adaptor or shown as below.
-
Insert another end of the USB charging cable into the Micro USB port of the wireless charger. The LED indicator lights up to indicate well connectivity.
-
Place the device with wireless charging receiving device on the mouse wireless charger, Charging and discharging. When charging, the blue light is always on, and the charging device is opened after that, the lights turn off.
Standard Accessories
Wireless charging board for mouse pad USB Cable Instructions
Product Specification
Input：5V/2A 9V/1.67A 12V/1.5A
Output：5V/1A 9V/1.1A 12V/1.25A
Power：15W
Parameter distance：≤6mm
Charging efficiency：≥75%
Product size: Wide300×High220×Thickness6.5mm
Attention
- Please keep the charger away from water or other liquid.
- If you need to clean the charger, please make sure it Power off.
- Using Environment temperature remains 0-45℃
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.