havit HAKII True Wireless Earbuds User Guide
- June 6, 2024
- havit
Table of Contents
LIVE MY SOUMD
HAKII ACTION
USER GUIDE
READY TO USE
When the charging case is opened, the earbuds will automatically turn on and
enter the pairing mode.
While the case is opened, press and hold the button at the bottom of the
charging case for 10s to reset the earbuds which are in the charging case.
CONNECT
Turn on Bluetooth function on your device and select HAKII ACTION referring to your phone instructions.
GAME MODE (LOW LATENCY MODE)
The boot defaults to the normal mode. Double-tap the right bud to switch between game mode and normal mode.
IN-EAR DETECTIVE
Music automatically pauses when you remove your buds and resumes with a tap when you place them back in your ears.
HANDS-FREE PHONE CALL
In the incoming call state, tap the touch button of any earbud once to answer
the call.
Touch and hold the touch button of any earbud for more than 2 seconds and then
release to reject the call.
Touch and hold the touch button of any earbud for more than 2 seconds and then
release to hang up the call.
ACTIVATE THE VOICE ASSISTANT
Double-tap the left bud to activate Siri*.
- Currently available for Siri and some Android built-in voice assistant.
- Funkcja obecnie dost pna tylko dla Siri i niektórych asystentów g osowych w systemie Android.
BATTERY INFORMATION
- The earbuds and the charging case each have a built-in rechargeable battery. We recommend using the supplied USB cable and a compatible standard USB power supply for charging the headphones.
- The over-rating power supply would damage the built-in battery.
- A complete charging cycle of the earphones takes about 50 minutes and the charging case takes about 1.5 hours. Please fully charge the earbuds and case before using it.
- The life of the built-in rechargeable battery drops with repeated charging. It is normal for all types of rechargeable batteries.
SPECIFICATIONS·
Model: HAKII ACTION·Wireless Version: 5.2·Waterproof: IPX7 for buds·Codecs:
aptX, SBC, AAC
Dynamic driver: φ10mm·Frequency response: 20 Hz – 20 kHz
Battery capacity: 55mAh*2, 420mAh (est)·Earbuds battery life: Up to 9 hours
WARNING:
- Please follow the instructions in this manual.
- Please use and store this product in the ambient temperature environment.
- Do not use this product near the heat source, such as a radiator, a hot air conditioner, a stove, or other instruments that produce heat.
- Don’t block the ports of the headset, such as charging indicator and microphone, etc..
- Please don’t adjust the volume to the maximum level for a long time to avoid causing dizziness or damage to hearing.
- No matter the product is damaged for any reason, it must be dealt with in time with the after-sale personnel of us. Any unauthorized demolition and modification will make the warranty invalid.
IMPORTANT SAFETY INSTRUCTIONS
Contains small parts which may be a choking hazard. Not suitable for children
under age 3.
This product contains magnetic material. Consult your physician on whether
this might affect your implantable medical device.
- Do NOT make unauthorized alterations to this product.
- Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
- Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
- Wipe off sweat from the earbuds and the charging case before charging.
- IPX7 is not a permanent condition, and resistance might decrease as a result of normal wear.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by HAKII could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules and with Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
This device complies with FCC and Industry Canada radiation exposure limits
set forth for general population. It must not be co-located or be operating in
conjunction with any other antennas or transmitters.
HAKII hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and, recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality,
disposal service, or the shop where you bought this product.
CH
WARRANTY TERMS AND CONDITIONS HAKII offers ONE (1) year warranty on all HAKII® products from the date of original purchase. The products should be purchased either from HAKII owned retail store or HAKII authorized dealers. Proof of purchase is needed to prove the product is purchased from HAKII authorized sales channels. HAKII offer free repair or replacement service during the warranty period.
THE FOLLOWING ARE NOT COVERED BY THE WARRANTY:
- Defects that cause by not following the products user manual, or using the parts that are not made or authorized by HAKII, or using the pirated software.
- Defects that caused by disassembling the products by any unauthorized maintenance center or person.
- Defects that caused by accident or any force majeure event, such as fire, water, external extrusion force or drop, lightning, earthquake, typhoon, etc.
- Deterioration of the components or the parts used on products, the nature of which is to become worn or depleted with use, such as headphone ear pads, silicon ear tips, batteries, etc.
- Fake commodities are not covered by the warranty.
- For unspecified terms, refer to the local laws and regulations where the sales stores and dealers located.
To claim repairs under warranty, please contact the dealers or retailers where the relevant product is purchased. To validate your warranty, you will need to provide the original sales invoice or other proof of ownership and date of purchase.
Please scan the QR code below or log in to the official website www.HAKII.com to quickly perform after-sales service:
THANKS FOR CHOOSING HAKII
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>