xiaomi MITVS26 3.1ch Soundbar User Manual
- June 6, 2024
- Xiaomi
Table of Contents
xiaomi MITVS26 3.1ch Soundbar
Packing List
- Bar
- Subwoofer
- Remote
- HDMI Cable
- Wall Bracket x2
- Plastic tubes x2 (7.5x30mm)
- Screw x2 (M4,L10mm)
- Screw x2 (T4,L30mm)
Product Overview
HDMI Concetion
Hanger Mount Installation
- Drill holes into the wall at a distance of 600mm.
- Push the plastic expansion tube into the hole, and then screw the wall-hanging screws in. (T4, L30mm).
- Fix the mounts onto the unit with screws (M4, L10mm).
- Hang the unit onto the wall screws.
CAUTION
- The USB port of Soundbar is used for update software and Signal input only.
- No naked flame sources, such as lighted candles, should be placed on the apparatus.
- The apparatus is intended to be used in moderate climates.
- WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.
- Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
- Risk of fire or explosion if the battery is replaced by an incorrect type.
Remote function
-
Input:
short press to switch between HDMI, BT, OPTICAL, COAXIAL and USB. -
Up/Down:
Long Press Sound mode to enter Advanced Sound
Setting. Then Press up/down to switch in Treble/System Bass/Audio Sync. Press OK to start adjustment. -
Left/Right:
When playing music, Short press to change next or previous track. Long press to fast forward or rewind -
Sound mode:
Press to switch between Standard, Cinema, Music, Game and News. -
Bluetooth
Short press to check BT status. Long Press to start BT pairing. -
AI Sound
Press to switch AI Sound on/off. When AI Sound on, Soundbar will adjust sound mode automatically to fit the current play. -
Night mode:
Press to switch Night mode on/off -
Bass +/-
Press to change Subwoofer volume -
Volume +/-
Press to change Bar volume
Other Function
NFC
Switch Soundbar to BT input, tap the phone in NFC section, the phone will
connect with Soundbar automatically.
Bar and Subwoofer Connection
Connect power supply, the Bar and Subwoofer will connect with each other
automatically.
If Bar and Subwoofer didn’t connect, please follow these instructions.
- long Press “Power button” and “Volume –” on the Bar at the same time, until the screen shows “ID SET”.
- Long Press pairing button of Subwoofer until the indicator in the back of it quick flash.
- Wait for bar and subwoofer pairing. When it’s done, the indicator will light stably.
Specification
-
Model Name: S26
-
Channel: 3.1
-
Max Power output (Speaker):
430W (Bar-180W, Subwoofer-250W) Supported play formats: Dolby Audio, DTS Digital Surround, DTS Virtual: X Dimension(LWH): Bar-86011560 mm3, Subwoofer-297210371 mm3 -
Operating Temperature Range: 0°C~40°C
-
Operating Humidity Range: 20%~80%Storage
-
Temperature Range: -15°C~45°C
-
Storage Humidity Range: < 80%
The following also applies to the Wireless Subwoofer
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING
- To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
- To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
CAUTION
- Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus.
- To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.
- Read these instructions.
- Keep these Instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
- When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
MODEL: S26
Xiaomi Inc.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This device complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmi_er must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmier. End-users and installers must be provided with antenna
installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
The shielded HDMI cable must be used with this unit to ensure compliance with
the Class B FCC limits.
The Wi-Fi module complies with FCC radiation exposure limits set forty for an
uncontrolled environment.
Operating temperature range: -10 °C to + 40 °C
ISED Statement
This device contains licence-exempt transmi_er(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Innovation, Science and Economic Development Canada ICES-003
Compliance Label:
CAN ICES-3 (B)/NMB-3(B)
The device could automatically discontinue transmission in case of absence of
information to transmit, or operational failure. Note that this is not
intended to prohibit transmission of control or signaling information or the
use of repetitive codes where required by the technology. – the device for
operation in the band 5150–5250 MHz is only for indoor use to reduce the
potential for harmful interference to
co-channelmobile satellite systems;
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
WARNING
Do not mix old and new ba_eries and Do not mix alkaline, standard (carbon-
zinc) or rechargeable (ni-cad, ni-mh, etc.) baeries.
This product contains technology subject to certain intellectual property
rights of Microso. Use or distribution of this technology outside of this
product is prohibited without the appropriate licence(s) from Microso.
Content owners use Microso PlayReadyTM content access technology to protect
their intellectual property, including copyrighted content. This device uses
PlayReady technology to access PlayReady-protected content and/or
WMDRM-protected content. If the device fails to properly enforce restrictions
on content usage, content owners may require Microso_ to revokethe device’s
ability to consume PlayReady-protected content. Revocation should not affect
unprotected content or contentprotected by other content access technologies.
Content owners may require you to upgrade PlayReady to access their content.
If you decline an upgrade, you will not be able to access content that
requires the upgrade.
California Residents
WARNING: Cancer-www.p65warnings.ca.gov