Syean Audio S-1200 Wireless Microphone Instructions

USER INSTRUCTIONS
professional Wireless microphone

Thank you very much for choosing the wireless microphone products produced by our company  Please read the instructions carefully before use If you have any questions please call your local dealer。

Introduction to the front and rear panels of the receiver

Back panel:

1. DC power input interface
2. Antenna A/B interface
3.  A / B channel-independent balanced output Cannon interface
4. 6.35 audio output interface

Handheld transmitter introduction

1.  Protective net cover
2. Upper and lower tube body
3.  LCD liquid crystal display
4. Switch button
5. Infrared frequency window
6. Dynamic microphone core
7. Battery compartment
8. Selective Color:

Introduction of waistband transmitter

1. Microphone input interface
2. Power switch
3. Power indicator light
4. Waist fixing clip
5.  Antenna
6. LCD liquid crystal display
7. Infrared linking window
8. Battery compartment

Introduction of receiving and transmitting display

Screen receiving display:

1. AF audio output display
2. Frequency display
3. Frequency corresponding channel display
4. Electronic volume display
5.  Lock screen prompt
6.  Transmitter power display
7. RF radio frequency receiving display

Binding instructions for waistband transmitter

Step 1: Turn on the power of the receiver and the waistband transmitter, and find the infrared frequency window between the receiver and the waistband transmitter.
Step 2: Keep the infrared frequency window of the waistband transmitter and the infrared frequency window of the receiver in the same straight line, and the best distance is within 30cm. Step 3: Press the IR button of the corresponding channel, the IR window indicator flashes, and the frequency of the transmitter and receiver are the same after the frequency is successfully linked, and the frequency linking operation is completed.
Note: If the linking fails, just repeat the above operation.

Handheld transmitter frequency description

Step 1: Turn on the power of the receiver and the handheld transmitter, and find the infrared frequency window between the receiver and the handheld transmitter. Step 2: Keep the infrared pairing window of the handheld transmitter and the receiver in the same straight line, and the best distance is within 30cm. Step 3: Press the IR button of the corresponding channel, the IR window indicator flashes and the frequency of the transmitter and receiver are the same after the frequency is successfully linked, and the frequency linking operation is completed.
Note: If the linking fails, just repeat the above operation.

receiver system menu description

System Menu 1: Infrared IR Linking Press IR to perform the infrared linking operation. At this time, the IR linking light flashes, keep the transmitter linking window and the receiver linking window on the same straight line and keep the distance within 30cm. After the frequency operation is successful, the working frequency of the transmitter automatically changes to be consistent with that of the receiver, and the system can work normally.

System Menu 2: Manual Frequency Tuning Press and hold the SET button for 2-3 seconds. At this time, the CH channel number on the screen flashes. Press the up and down buttons to change the system frequency. After the change is completed, the frequency will be automatically locked in 3 seconds. Then perform the infrared frequency linking work, and the frequency linking operation refers to the corresponding transmitter frequency linking operation.
System menu 3: Automatic frequency search Press and hold the SCAN button for 2-3 seconds. At this time, the system SCAN will start the intelligent search for clean frequency. The system will scan for about 20 seconds until the frequency is changed, and then perform infrared frequency matching and frequency matching operations. Refer to the corresponding transmitter for frequency operation.
System menu 4: Screen lock Press the up and down keys at the same time to lock the system, otherwise it will unlock. After the lock is locked, a lock pattern will appear on the upper right of the display. Any operation after the lock is invalid, but it does not affect normal use.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

system parameters

Receiver parameters:
Carrier frequency range: 902-927MHz Oscillation method: PLL phase-locked loop
Av a i l a b l e b a n d w i d t h : 5 0 M H z M o d u l a t i o n
method: FM frequency modulation
Number of channels: 200 channels of infrared automatic frequency
Antenna interface: TNC base Operating
temperature: -18 to 50
Display mode: LCD Offset degree: 45KHz
Sensitivity: -100dBm (40dBS/N) Dynamic range: >110dB
Spurious suppression: >80dB Audio response: 60Hz-17KHz
Audio output: unbalanced: +4dB (1.25v)/5K Ω integrated signal-to-noise ratio: <0.5%
Balance: +10dB (1.5v)/600Ω
Receiving mode: frequency conversion superheterodyne
Power supply current: 250mA

Transmitter parameters:
Oscillation mode: PLL phase-locked loop
Output power: 3dBm-10dBm (LO/H conversion)
Battery: 2 1.5v No. 5 batteries Current: <100mA(AF), <80A(LF) Use time (alkaline
battery): about 10 hours at high power, about 15 hours at low power

WARRANTY CARD
Thank you for purchasing and using our company’s electronic products. In order to protect the legitimate rights and interests of consumers, please ask the dealer to fill in the relevant information below when you buy：
Date of Purchase:……………………
Product Model:………………….
Dealer:……………………
Tel:………………….
Warranty Description:
Warranty service is limited to normal use. Within one year of purchase, this product can enjoy free repair service. Damage caused by consumers, maintenance, and improper storage can be removed at a repair service point that is not authorized or designated by the company Any damage caused by movement or force majeure is not covered by the warranty, and repairs are charged. Please bring this certificate and proof of purchase

PRODUCT CERTIFICATION
This product has been inspected to meet the quality
requirements and allowed to leave the factory.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>