matatalab MTB1801 MatataBot Coding Set for Kids User Guide
- June 6, 2024
- matatalab
Table of Contents
- Parts List
- About Home Edition
- How to Turn On and Off
- Howto Pait
- Coding Operation instructions
- Charging instructions
- Software Update Instructions
- Technical Specification
- Precautions
- Warranty Terms
- Judgment of Common Problems
- For more help
- Warranty
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MatataBot Coding Set for Kids
User Guide
Parts List
About Home Edition
MatataBot
Command Tower and Control Board
Coding Black
Motion Blocks
For each step of “Forward”/ “Backward’, the robot will move 10cm towards that
direction;
“Turn Left” refers to a 90 ° turn to the left on the spot while “Turn Right’
refers to a 90° turn to the right.
Number Blocks
Place a Number block under the Forward/Backward/Loop blocks, and the robot
will execute the function corresponding to the number of times.
For example, if a Number block 2′ is placed under a “Forward’, the robot will
advance 2 steps:
Music Blocks
Change the scale by turning the white rotating cover to different gears, a total of 7 gears, corresponding to do re mi fa so la xi By placing the digital programming block below the music programming block, the duration of the scale can be changed.
Fun Blocks
Here are Fun Blocks for 6 pieces of music, 6 sets of dances, and 6 sets of actions that the robot will perform. Combining a Number Block beneath the Fun Blocks, the robot will play or perform the corresponding sequences of music, dance, and movement; if there is no number, the first music/dance/action will be executed by default.
For example, if a “3 is placed below the Preset Dancing, the robot will perform the No.3 preset dance
Angle Blocks
The command function of Angle Blocks is to specify the angle of ‘Turn Left’ or “Turn Right’ in place. When an angle is placed below the “Turn Left” or “Turn Right coding blocks, the movement of “turning left x”/”turning right x” can be achieved.
For example, when a ’60 is placed under the “Turn Right” coding block, the robot will turn 60º right.
Loop Blocks
Loop Starts’ and ‘Loop Ends” must be used together. ‘loop Starts” shall be placed in front of an instruction that needs to be executed repeatedly, and ‘loop Ends” shall be placed afterward. A “Number block placed under “Loop Starts’ indicates the number of times the instruction is repeatedly executed; when no “Number” block is placed, the instruction will be executed only once.
For example: When a2 coding block is placed under the “Loop Starts” coding
block, the robot will execute the instructions between ‘loop Starts” and ‘loop
Ends” twice.
How to Turn On and Off
Command Tower
ON: Press and hold the power button for ls until the status indicator
(blue) lights up, and the startup music is played;
OFF: Press and hold the power button for ls until the status indicator
(blue) lights up, and the shutdown music is played.
MatataBot
ON: Press and hold the power button for ls until the status indicator
(blue) lights up, and the startup music is played;
OFF: Press and hold the power button for ls until the status indicator
(blue) lights up, and the shutdown music is played.
Howto Pait
when the Command Tower and MatataBot are turned on, the indicators on both wild flash, meaning a connection is starting. When the pairing is successful, you will hear the Ding Ding sound effect from them while the indicator lights of both turn constantly on
Tips
If the indicators of the Command tower and the robot keep flashing slowly
otter powering on, it moons that the hove toils to pair u0essful/y. In this
0as please press the Coonan tower’s power button thee tine.s in quick
Succession to put it into the re-pairing mode. There-pairing process will be
lost about IS. Please wait until the Command Tower and robot ore successfully
connected.
Coding Operation instructions
Tips
Ator the Common lower on the robot are turned on the connection you just need
to pile the cooing boos and press to start button to control the robot
Connect the Command Tower to the Control Boord 0no horizontal surface 0s shown in the figure, and place the coding blocks on the Control Boord tor programming (ofter the Common lower and the robot are turned on and connected when you finish 0oding please press the start button on the Control Board, and the program will be transferred from the Common tower to Matto80t to p&/form the instruction.
Tips
The burn structure on the Control Board matches the pit structure on th cooing
blocks in this oose children will not place the coding blocks interest.
Program Running Status
When the program is funning. the indicator light on the Control Board will
continuously flash in yellow until the end of the program.If you press the
start button on the Control Board during the program operation, the current
program will stop.
If the program is not running or has ended, the indicator light on the Control
Board will be steady yellow. At this time, the user can arrange the next
program; when a program syntax error occurs, the Control Board’s indicator
light wit flash quickly, and the Command Tower will issue a Ding Ding alarm
sound to remind the user to adjust the coding instructions before running it
again.
Tips
It is recommended to use Matatalab robots in a reading-friendly environment
for kids to ensure eye safety and a better user experience. In case the
environment is too dark or abnormal, the Command Tower will sound an alarm and
the programmed instructions may not be executed normally.
Coding Rules:
when coding blocks are placed in the Control Board’s identification area,
the Control Board will recognize and run the coding blocks in accordance with
the rules of left to right and ‘top to bottom. You can continue to place
coding blocks on a new line when a line is full. his rule also applies if
there is a GOP between any coding blocks.
Example:
The coding instructions that the Control Board can recognize and run in this program are: MatataBot advances 2 steps; turns right 90 ·in situ; plays the first preset music; and repeats the previous instructions 4 times.
Charging instructions
Please charge the Command Tower and MatataBot with a V2A power adopter when the Command Tower or MatataBot’s indicator lights up in blue and flashes quickly, it means that the device has insufficient power and needs to be charged when charging, the indicator lights up in red and turns to green when the battery is fully charged
Software Update Instructions
Matatalab will from time to time launch updated Command Tower and robot software for Matatalab Coding Set (Home Edition) owners. Please visit the following link: http://help.matatalab.com/en/firmware to get the software update guide.
Technical Specification
MatataBot battery | 500mAh Li-ion polymer battery |
---|---|
Command Tower battery | 2000mAh Li-ion battery |
MatataBot / Command Tower USB Type-C input | DC5V / 2A MAX |
Pairing | Bluetooth |
Range | 5-6m |
Operating temperature | 0°C-40°C |
Storage temperature | -10°C-55°C |
Precautions
- This product is not suitable for children under 3 years of age;
- The adapter (not included in the package) used to charge this product cannot be used as a toy;
- The product can only be connected to one power adapter;
- When cleaning the product with liquid, please turn off the product and disconnect it from the external power supply;
- Children are required to be accompanied by an adult when using this product;
- Please do not place this product on high places and edges to avoid dropping damage;
- Do not disassemble, repair or modify the product yourself to avoid product failure;
- Do not use or charge the product in an environment outside the working temperature range of the product;
- When the product is idle, please fully charge and store it. It needs to be charged at least once every 3 months; Please use the recommended adapter (5v/ 2A adapter) to charge this product;
- Please regularly check the wires, plugs, casings or other parts for damage. Stop using it when damage is discovered until fully repaired.
Warranty Terms
- This product has a one-year warranty period.
- The following conditions are not covered by the free warranty:
a. Failure to present the warranty certificate and valid invoice;
b. The warranty certificate shows signs of alteration or is inconsistent with the product;
c. Natural consumption/ wear and aging of consumable materials;
d. Damage caused by lightning or other electrical issues;
e. Damage caused by improper use by users, such as liquid penetration and damage of external force;
f. Damage caused by unforeseen circumstances such as accidents/ disasters;
g. Products that have been dismantled/modified/repaired by users;
h. Damage beyond warranty or caused by failure to use/maintain/save as required by the product instructions.
Warning
Risk of explosion if the battery is replaced by an incompatible one; Please dispose of used batteries according to the instructions.
Judgment of Common Problems
Judge by indicator status
LED Light of Command Tower:
Light Display| Blue light flashes slowly| Blue light flashes quickly| Red
light constantly on| Greenlight constantly on| Blue light constantly on| Pink
purple light constantly on| LED off
---|---|---|---|---|---|---|---
Status| Not connected| Low power| Charging| Fully charged| Connected pairing|
The machine is on, charging but not fully charged| LED light is
damaged
Solution| Pair again| Recharge| | | | | Return to manufacturer for repair
MatataBot LED Light:
Light Display| Blue light flashes slowly| Blue light flashes quickly| Red
light constantly on| Greenlight constantly on| Blue light constantly on| LED
off
---|---|---|---|---|---|---
Status| Not connected| Low power| Charging| Fully charged| Connected pairing|
LED light is damaged
Solution| Pair again| Recharge| | | | Please visit
www.matatalab.com for after-sales support
Control Board LED Light:
Light Display | Orange light flashes | Orange light constantly on |
---|---|---|
Status | Executing instruction | Command Tower is not working |
Interrupted MatataBot wheel movement: Unable to move/ stuck when moving/
squeaky
Solutions:
- Check the wheels for stuck objects, and gently roll the wheels manually;
- Charge the MatataBot and try again after charging;
- If it fails, please contact our after-sale service for technical support.
Inaccurate MatataBot movement: Fails to move straightly/ severe irregular
shapes drawn by it/ inaccurate angle
Solutions: Visit http://help.matatalab.com/ for getting methods of
correcting angle and distance for optimization.
The connection between the Command Tower and the robot is normal. But after pressing the start button, the robot does not execute the command after issuing the startup sound effect.
Solution:
The robot has received the Bluetooth signal. The issue may be related to the
Command Tower’s recognition failure or stuck robotic wheels.
“Recognition Problems” Solutions:
Step 1. Check whether the control board is covered by highlights or
shadows, and then change the position of the Command Tower to elsewhere with
normal light and try again. If it does not work, move to step 3.
Step 2. Check whether execution failures occur occasionally. If so,
please move the coding blocks to the center area of the control board and
observe if the execution is successful. If not, go to step 3.
Step 3. Press and hold the start button for lOs. When the start button is
released, the MatataBot will make a “ding” sound. Then return the machine to
the manufacturer for repair. This is to collect on-site environmental data to
facilitate after-sales to find
For more help
Please visit www.matatalab.com for more product
instructions, exceptions and troubleshooting, and software updates, among
others.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
MATLAB CO., LTD.
Floor 2, Building 5, Pingshan Minqi Technology Park, Xiii Town, Nanshan
District, Shenzhen, China
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications to this device not explicitly approved
by the manufacturer could void your authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Frequency range: 2402MHz-2480MHz
Max power for Bluetooth: <=-4dBm(BLE)
The Maximum Permissible Exposure (MPE) level has been calculated based on a
distance of 20 cm
between the device and the human body. To maintain compliance with RF exposure
requirements, use products that maintains a 20cm distance between the device
and the human body.
Hereby, MATATALAB co., LTD declares that the radio equipment type MTT1801/B
MTB1801/B are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet
address:www.matatalab.com/doc
This device complies with the essential requirements and other relevant provisions of the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU, the Eco-Design Directive 2009/125/EC, and the ROHS Directive 2011/65/EU.
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT ( WEEE)
The WEEE marking indicates that this product should not be disposed of with
regular household waste at the end of its life cycle. This regulation is
created to prevent any possible harm to the environment or human health.
This product is developed and manufactured with high-quality materials and
components which can be recycled and/or reused. Please dispose of this product
at your local collection point or recycling center for electrical and
electronic waste. This will make sure that it will be recycled in an
environmentally friendly manner, and will help to protect the environment in
which we all live.
Warranty
Warranty period: One (1) Year limited
The following circumstances will void the free warranty
Not able to provide this warranty certificate and valid invoice.
This warranty is unilaterally modified or incompatible with the product
Natural consumption/ wear and aging of consumable parts.
Damage caused by lightning or other electrical system problems.
Damage caused by improper use, such as external force, damage, etc.
Damage caused by force majeure factors such as accidents/ disasters.
Self-dismantled/ reassembled/ repaired products.
Product exceeds warranty period.
Abuse or misuse, including but not solely limited to the failure to use this
product beyond the user manual.
Caution-electric Toy
Not Recommended For Children Under 3 Years Of Ages. As With All-Electric
Products, Precautions Should Be Observed During Handling And Use To Prevent
Electric Shock.
Conforms To The Requirements Of Astm Standard Consumer Safety Specifications
On Toy Safety F963.
WARNING
CHOKING HAZARD-Toy contains small parts. Not for children under 3 years.
Designed by MATATALAB in China
MATLAB CO., LTD.
NO.504, Building B, Jianxing Technology Building, 3151 Shahe West Road,
Nanshan District, Shenzhen, Guangdong, China, 518055
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving a tenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.