Sequent SC2-1-AMBB-TBU SuperCharger Smartwatch User Manual

Sequent SC2-1-AMBB-TBU SuperCharger Smartwatch User Manual

Quick start

Download the app from https://sequentworld.com/app

Safety instructions

• Use the watch between 0°C and 35°C (32°F and 95°F).

• Watch may be stored in a clean, dry location between 10°C and 35°C (50°F and 95°F) when not in use.

• Avoid any extreme temperature changes.

• Avoid any kind of shocks, be they physical, thermal or otherwise.
  They may damage internal and external components of your watch.

• Never allow children to play with the product; the small components may be a choking hazard!

• The Product is not intended for use where the failure of the Product could lead to death, personal injury, or severe environmental damage.

• Do not attempt to open, disassemble or tamper with the Product. Substances contained in this Product and/or its battery may damage the environment and/or human health if handled and disposed of improperly.

• Do not use the Product in circumstances that could cause a dangerous situation, such as using the Product while operating heavy machinery or driving a moving vehicle in a manner that might cause you to take your eyes off the road or become so absorbed in the activity that your ability to concentrate on the act of driving becomes impaired.

• Do not wear or clean your Product while you are charging it. Always unplug the charger first before cleaning the Product.

• Do not use abrasive cleaners to clean your Product.

• Do not place your Product in a dishwasher, washing machine, microwave oven, oven, dryer.

• Do not use your Product in a sauna or steam room.

• Do not expose your Product to water at high pressure, such as ocean waves or a waterfall.

• Do not leave your Product in direct sunlight for an extended period of time.

• Do not leave or use your Product near open flames.

Legal notice

By using your Sequent you expressly agree to the Sequent Terms and Conditions available on our website.

This product is not a medical device and should not be used to diagnose or treat any medical condition.

Caution

Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Activate and sync

1. Download and install the latest version of the Sequent app from www.sequentworld.com/sequentapp
2. Tap the watch crown to wake up the watch. The watch will blink blue once
3. Wait 10 seconds then place the watch for an hour on the charger
4. Once the watch has been charged, tap the crown to activate the sync-mode
5. Open the app and follow the instructions
   

LED indicator

What do the different flashes of the watch LED mean?

• Single blue flash confirms the watch has been awakened by double tapping the crown
• Blue flickering means the watch is connected to the phone and is transmitting information
• Red pulsing shows when the heart rate sensor is active
• Yellow blinking indicates charging
• Green blinking indicates fully charged
  

Personal Data & Warranty

Make sure you have read our privacy policy and warranty, which you can find on our website.

Regulation

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for help.

RF exposure warning

The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.

The equipment must not be co-located or operating in conjunction with any other antenna or transmitter

Canada, avis d’industry Canada (IC) notice

This device complies with Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-3 (B) / NMB-3(B) (Canada)

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the interference causing equipment standard entitled: “Digital Apparatus,”

ICES-003 of the Canadian Department of Communications.
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Europe (CE Declaration of conformity)

Hereby, Sequent Ltd., declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Intellectual property

All Intellectual Property, as defined below, owned by or which is otherwise the property of Sequent or its respective suppliers relating to this product, including but not limited to, accessories, parts, or software relating there to (the “Product System”), is proprietary to Sequent or its licensors and protected under Federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship.

You may not infringe or otherwise violate the rights secured by the Intellectual Property.

Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain with Sequent and its licensors and suppliers.

Disposal and recycling information

The symbol indicates that this Product shall not be mixed with unsorted municipal waste when disposed of. There is a separate collection system for waste electrical and electronic equipment. Usually old electrical and electronic equipment can be returned free of charge. For further information please contact the competent municipal authorities or the shop where you purchased the Product. Correct disposal ensures that waste electrical and electronic equipment is recycled and reused appropriately. It helps avoid potential damage to the environment and human health and to preserve natural resources. Do not dispose of the Product with household waste. Batteries are not to be disposed of in municipal waste streams and require separate collection.

Disposal of the packaging and your Product should be done in accordance with local regulations.

Specifications

• Low Energy Wireless (2.4 GHz)
• Lithium Polymer Battery 3.7V 45mAh
• Android 7.0 +
• iOS 11
• Sequent AG, Eptingerstrasse 3, 4052 Basel, Switzerland
• Models : S2.2 STEEL-ALU, S2.2 TITANIUM
• Rating: DC 5V, 45 mA
• IC ID: 25026-S22
• CAN ICES-3 (B)/NMB-3(B)
• FCC ID :2AS8DS22
  

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>