ZEISS DTC 3 Thermal Imaging Camera Instruction Manual
- June 6, 2024
- Zeiss
Table of Contents
ZEISS DTC 3 Thermal Imaging Camera
Safety Instructions and Regulatory Information
Safety instructions for handling when used with a riflescope on a firearm
- Check the legal and regional regulations in your country before using the ZEISS DTC 3 with a riflescope.
- If the ZEISS DTC 3 is connected to an optical device used on a firearm, always ensure that the firearm is unloaded when mounting the ZEISS DTC 3.
- Before using, ensure that your riflescope and the ZEISS DTC 3 are in proper working condition.
- Test the correct setting of the point of impact using controlled shots.
- Improper or inaccurate mounting of the ZEISS DTC 3 on the riflescope may result in a shift in the point of impact, which may affect accuracy.
- An incorrectly adjusted ZEISS DTC 3 may result in a considerable deviation of the point of impact.
Safety instructions for handling
- Look through your riflescope to test if the optics provide a clear, undisturbed image.
- If handled roughly, a maladjustment cannot be ruled out.
- Never point the lens of the device directly at intense heat sources such as the sun or laser equipment. The objective lens and eyepiece can function as a burning glass and damage the interior components.
- Protection class IP66 is only achieved when all rubber covers are firmly closed.
Danger of swallowing
- Do not place this device in the hands of small children. Incorrect handling can cause small parts to come loose, which may be swallowed.
Safety instructions for the battery
- Handle the device with care: rough handling can damage the internal battery.
- Do not expose the device to fire or high temperatures above 60°C.
- Do not disassemble the device to access the battery. The battery is not meant to be replaced by the end user.
- Only charge the device at temperatures ranging between 10°C and 40°C.
- The battery capacity decreases when operated in a cold ambient temperature. This is not a fault and occurs for technical reasons.
- Do not store the device at temperatures below 0°C or above 35°C for long periods. This permanently reduces the capacity of the battery.
Safety instructions for the power supply unit
- Check the power supply unit and cable for visible damage before use.
- Do not use defective parts and observe the safety instructions for your power supply unit.
For further information, please refer to the user manual and Quick Guide provided. Both are available on our website in the download center: www.zeiss.com/hunting/download
Intended use
The device is intended for mounting in front of an optical device and for
displaying heat signatures during nature observation, remote hunting
observations and for civil use. This device is not a toy for children. Use the
device only as described in the user manual. The manufacturer and dealer
accept no liability for damage caused by improper or incorrect use.
Legal and regulatory information
Frequency range of radio module: Bluetooth: 2402–2480 MHz
Power of radio module: 0.2 mW
Carl Zeiss AG hereby declares that the radio equipment types ZEISS DTC 3/25
and DTC 3/38 comply with the directives 2014/53/EU and 2011/65/EU. The full
text of the EU declaration of conformity is available at:
http://www.zeiss.de/DTC3/conformity
Some certification marks for standards supported by the ZEISS DTC 3 can be
displayed on the screen of the ZEISS DTC 3. To do this, select Menu System
Legal Info.
Disposal of batteries
In the European Union, this symbol indicates that the battery used in this
product may not be disposed of in domestic waste and must be collected for
disposal separately. When returning used batteries, please use a collection
system that may exist in your country and refer to qualified personnel to have
the battery removed from the device.
The materials and substances in the battery may have a detrimental impact on
health and the environment.
By depositing empty batteries at a recycling facility, you contribute to the
protection and conservation of our environment.
Please only return discharged batteries.
The battery used does not contain mercury, cadmium or lead in quantities
exceeding the limits defined in Directive 2006/66/EC.
User information on the disposal of electrical and electronic devices
(private households)
The WEEE symbol on products and/or accompanying documents indicates that used
electrical and electronic products may not be mixed with ordinary household
waste. For proper treatment, recovery and recycling, take these products to
the appropriate collection points where they will be accepted without charge.
In some countries, you may also return these products to your local retailer
when you purchase an equivalent new product. The proper disposal of this
product serves to protect the environment and prevents possible harmful
effects on human beings and the environment, which may arise as a result of
incorrect handling of waste.
More detailed information on your nearest collection point is available from
your local authority. In accordance with state legislation, penalties may be
imposed for the improper disposal of this type of waste.
For business customers within the European Union
Please contact your dealer or supplier regarding the disposal of electrical
and electronic devices. He will provide you with further information.
Information on disposal in other countries outside the European Union
This symbol is only applicable in the European Union. Please contact your
local authority or dealer if you wish to dispose of this product and ask for a
disposal option.
Regulatory information USA and Canada
USA:
FCC ID: 2AMSPDTC338
Self Declaration of Conformity – SDOC
-
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions : -
This device may not cause harmful interference.
-
This device must accept any interference received, including interference that may cause undesired operation.
-
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Name of Responsible Party
Carl Zeiss SBE, LLC / Consumer Products
ZEISS Group
One North Broadway, Suite 1501
White Plains, NY, 10601
USA
Phone +1 800 858 6745
We, Carl Zeiss Inc. hereby declare that this product was tested conforming to the applicable FCC rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commissions requirements.
Canada:
IC: 22938-DTC338
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
ICES 003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>