ZKRFiD D247 USB Driverless IC Desktop Card Instructions

D247 Desktop Card
Issuer Instructions

Add：1601, Block 6, Cloud Park, Bantian Street, Longgang District, Shenzhen
TEL：0755-29062099
Web：http://www.zkrfid.com

ZKRadio Guang Dong Tech Co., Ltd.
Desktop Issuer

Overview

USB driverless IC desktop card issuer is a contactless smart card serial number reader developed based on the ISO/IEC14443 A, ISO/IEC14443 B, and ISO 15693 international standard protocols. It is designed with a high-performance RF card reader circuit designed by our company; it has the characteristics of high integration, strong anti-interference ability, small size, stable performance, high-cost performance, and convenient use. Can provide USB communication interface. It is widely used in various radio frequency identification application fields such as access control, attendance, charging, anti-theft, patrol and so on.

Features

• It comes with a card reader antenna, the working frequency is 13.56MHz；
• The data receiving time within the effective distance is less than 90ms；
• Data output by USB.

Physical Picture

Functions

• Support the physical card number of the card conforming to the ISO14443A protocol
  (includes 50/S70/desfire/NTAG213/NTAG216/ultralight/ FM1204 /FM1208);

• Get Felica/HID iclass physical card number；

• Read & Write S50/S70；

• Read & Write Ultralight C；

• Read & Write NFC tag(NTAG213)；

• Read & Write ISO15693 OCODE 2；

• Read & Write Desfile；

• Provide ISO14443A APDU command；

• Provide ISO14443B APDU command.

Parameters of D247

Stand-by Current：<60mA
Swipe Current：<200mA
Environmental Requirements| Operating Temperature：-10℃ ~ 50℃
Storage Temperature：-20℃ ~ 65℃
Working Frequency| 13.56MHz
International Standard| ISO/IEC 14443A, ISO/IEC 14443B, ISO 15693
Communication Format| USB output
Length of connection line| 1500MM
Card number output format| The default active mode hexadecimal positive sequence output all card numbers

Instructions

Connect the card issuer to the computer through the USB cable:

1. Power on — the power indicator light will be blue and green together (about 10S);
2. Turn on — the power indicator (green) lights up once, and the buzzer sounds once;
3. Standby state — the blue light of the power indicator light is always on;
4.  wiping cards — swiping the card will turn on the green light and the buzzer will sound once.

Packing List

Device prompt

Troubleshooting

socket is plugged in
2. Whether the connection line is good
Reader does not read cards| 1. Check if the card type is correct
2. Whether the card is damaged

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any inte reference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,  pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

RF Exposure
The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.

1601, Block 6, Cloud Park, Bantian Street, Longgang District, Shenzhen
TEL:0755-29062099

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>