PETER MILLAR XH-23J True Wireless Bluetooth Earphones User Guide
- June 6, 2024
- PETER MILLAR
Table of Contents
XH-23J True Wireless Bluetooth Earphones
User Guide
CONTENTS
AUTO PAIRING
CHARGING
WARNING
DO NOT use alcohol paint thinners, detergents, shampoo, or other solvents for
cleaning purposes.
DO NOT intentionally immerse the earphones underwater for a long time.
DO NOT wash the earphones in the washing machine.
DO NOT expose the product to extremely high or low temperatures.
DO NOT leave the product near candles, cooking burners, and open flames.
DO NOT disassemble the product in any way to avoid electric shock. Only charge
the battery in accordance with the instructions provided by the company.
DO NOT wash the charging box.
CAUTION
RISK OF EXPLOSION INCREASES IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
INSTRUCTIONS DO NOT DISCARD THE USED BATTERIES ALONG WITH HOUSEHOLD WASTE.
DISPOSAL OF BATTERIES SHOULD COMPLY WITH LOCAL ENVIRONMENTAL REGULATIONS.
Product specification:
Bluetooth chip: J L6973 D v5.1
Dual ear direct connection, regardless of master-slave, master-slave switching
function Support apt-X audio decoding (HD decoding)
Receiving distance: within 10m
Working frequency: 2.402 GHz — 2.480 GHz
Transmission power: class2, max4dbm
Audio decoding mode: apt-X AAC, SBC
Charging input voltage: dc5 ± 0.25V
Battery Specification: 3.7V 40nnah (headset)
300mah (charging box
Working voltage: 3.7V (3.3-4.2v)
Charging time: 1.2h
Sensitivity of microphone: – 38 ± 2dB
Low voltage prompt: 3.3V
Speaker specification: 16 0 / 6mm
Frequency response range: 20 — 20KHz
Sensitivity: 99 ± 3dB
Continuous call: 4H
Continuous music playing: > 4H
Standby time: > 100h
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television Recep on, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Opera on is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>