RISU ENHANCEMENT03 Smart Tablet User Manual
- June 6, 2024
- RISU
Table of Contents
The user manual
Attention:
This handbook contains important security measures and the correct use of the product information, in order to avoid accidents. Please make sure to read the manual carefully before using the device.
-
Please don’t be in high-temperature moisture or very dust place
-
Please don’t be in high temperature, Especially in summer don’t put the device in the car when Windows closed.
-
Avoid fall or Violent collision of the device, don’t make the TFT display screen were violent tremor, This could cause TFT display screen abnormal or damage.
-
Please choose the appropriate volume, Use headphones that should not be too big volume, If feel tinnitus, Lower the volume or stop using it.
-
Please charge In the following condition.
A、 The battery power ICONS shows have no power
B、 The system automatically shuts off, start-up after power off soon
C、 Operation buttons no response
D、 The machine that the top right corner shows red icons -
When the device is in the format or ongoing upload and download file, please don’t suddenly disconnect, This could cause an application error.
-
For those who because of damage to the product, repair, or other causes of erased the memory, The company shall not be liable for any responsibility, please follow the user manual for the standardized operation to use the device.
-
Don’t disassemble the product, don’t use alcohol, Thinner, or benzene to scrub products.
-
Don’t use the device one of the places of prohibition to use electronic equipment in regional (such as the plane)
-
Please don’t use the Tablet PC when you in driving or walking down the street
-
USB just only be used for data transmission
The company reserves the right to improve the product, products specification
and design have any change. The information is subject to changes without
prior notice.
(This tablet is no waterproof function)
[Remark] All pictures in this manual are just for your reference. products
specification and design have any change, The information is subject to
changes without prior notice.
Desk:
1.1 Touch panel
Capacitive touch panel: In The Operation, click, dragging on the touch panel.
1.2 POWER
Startup: Long Press and hold the power button, the system will enter the
main interface
shutdown: In the main menu interface, press the power button about 5
seconds to shutdown,
The system can hint “power off” option, Click “OK”, you can safely shut down.
Lock screen： Short press the Power button to lock the screen or unlock
the screen.
Remark 1. When power is empty, the system will shut down automatically.
2. Illegal turn off the device, the restart will scan and restore the disk,
it may take longer time to enter into the system.
1.3 BT
Settings > Connected devices > Pair new device
1.4 WIFI
Settings > Network & Internet > Wi-Fi
1.5 BACK
Short Press BACK button will return the last interface.
1.6 MIC
Recording
1. 7 Volume+,
the Volume buttons on top Volume+, Volume-achieve changes in the volume.
1. 8 earphone jack
3. 5 mm standard earphone jack.
1.9 Video output interface
HDMI output interface
1. 10 TF card
TF-CARD jack: external T-FLASH card
1.11 Mini USB
Mini-USB jack: you can use it to connect the computer for data transmission,
charging and external connection USB flash drive.
1.12 Recovery
When the Tablet is under the condition of the crash, upgrade firmware.
First use
2.1 Battery management and charge
Before first use, please set the device’s battery is fully charged.
Just need to connect the adaptor or USB interface, then you can charge.
The first two times charging please keep about 6 hours, after that you just
need.
4 hours to charge.
【 Remark 】 This tablet uses a Built-in type polymer battery, Charge must be to
choose a standard adaptor(input: AC110-240V 50/60Hz Max:180MA. Output:
C5.0~5.5V/1.5A), this device without supply DC charging, USB interface can
charge, Choose USB interface to the charger.
During the charging, the battery icon will scroll
When finished charging, the battery icon will become green and stop rolling
In order to prolong the service life of the machine, suggest using out battery
power before charging it.
【Remark】
- If you long time don’t use this Tablet, in order to avoid power consumption caused damage, please charge/play the battery once a month.
- After low battery shut down connect DC adaptor, the device will remind low battery, charging, need to wait some time until the battery is enough to power to enter into the main menu.
- Device charging should be in standby status to reach normal charging time.
Because with device and screen consumption, it may cause longer charging time.
2.2 Connection with PC
U Use USB cable to connection window, click Turn connect device to PC, the device will on USB storage to connect to PC.
Into the load mode, you can copy, delete the file on the device and the file
on the memory card.
3. Equipment operation interface
3.1 the Main interface describe
After start-up will enter the main interface
In the main interface, you can:
Management main interface software ICONS: long-press the icons 3 seconds,
after the icons, will bigger, then you can drag anywhere in the interface.
Delete icons dong press the icons 3 seconds, drag the icons to the Recycle Bin icon, once it becomes red, Loosen your hand, after that, you can delete icon you touch the screen keep a time.
3.2 status bar describe
• The status bar above the screen
The top left displays the main interface software, T-Flash card, USB
connection status, and so on top-right display the battery, battery charge
icons, current time. set time, Settings Menu, ESC button.
3.3 Use touch panel
The device is equipped with a 10.1″ touch screen. Following the main touch,
the screen area is described and describes some of the tips for how to use the
touch screen.
No matter which interface you are on the screen can go back to the main screen
by pressing the soft key on the bottom right corner of the main screen.
【 Attention 】 The main screen soft key functions as the machine’s back key In
different applications, by tapping the back soft key on the bottom right
corner of the touch screen you can return to its interface on the up floor.
In different applications, by tapping the menu key on the upper right comer of
the touch screen, the screen will appear the operation setting interface as
follows.
【Remark】The main screen soft key functions as the machine menu
In the main interface, you can touch the icon to open the Apps
In different browsers (file, music, video, pictures), You shift and drag the
scroll bar, so that the file list can be up or down to roll.
4. Equipment basic set
Setting: Click icons , enter setting interface
4.1 Silent mode, Volume, Notification ringtone, Audible selection, Screen lock sounds
4. 2 Application
Manage applications
Unknown sources: Click “Unknown Sources”, then click “OK”
Manage application: manager and uninstall Application
【Remark】: when you Firmware Upgrade, please close the USB connect How to
uninstall?
- enter ( ) “setting” > “Application” > “Manage application” And then there will be installed the program list
- Click you want to uninstall icons, will enter the following interface
- Click Uninstall, then you can delete the application
4.3 Privacy
Factory data reset
4.4 Storage
Remove TF card, view of the available storage space
【Remark 】: please touch the option “delete SD card” , so that can safety to
remove SD card
4. 5 Language & keyboard
Setting: (Language), text input and automatic error correction options;
Select Language: 54 kinds of national languages are available.
Remark: Android system can support 54 kinds of language, now the main
interface just support
14 language.
Android keyboard: Android keyboard setting
Sound on Key-press
Auto-capitalization
Show suggestions: Display suggested words while typing
Auto-complete: Space bar and punctuation automatically insert the highlighted
word
4. 6 Date & time setting
Set date, set time, Select time zone, and select date format
Developer options
Choose USB work pattern: OTG/HOST/SLAVE-
About tablet
The company reserves the right to vary the product design
Product pictures and content are for reference only, and specifications of the
right, then without prior notice.
Specifications appearance please to sales kind prevail.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>