Moisturnt HY-X500-01 Oil Diffuser Guidebook Instruction Manual
- June 12, 2024
- Moisturnt
Table of Contents
Oil DIFFUSER GUIDEBOOK
Aroma Diffuser An instruction manual
Model:
HY-X500-01
HY-X500-01 Oil Diffuser Guidebook
Moisturnt is a technology company dedicated to creating a modern smart
lifestyle. We attach great importance to customers’ shopping experience.
We offer 100% guarantee on our product and promise that the product you bought
enjoys the following warranty privileges:
| 30 days refund or exchange;
---|---
| One-year warranty.
| 90 days Refund;
Only the purchase of Moisturnt brand products can enjoy the above after-sales
warranty policy.
Customer Support
We will do whatever it takes to ensure your satisfaction. Please feel free to
contact us if you have any problems.
Email: support@huayulianda.com
Note: Please include your order number.
Thank you for your purchase! In order to use the product in a more colorable
and safer way, please read the manual carefully for correct use. Please keep
the manual for future reference in case of any problem.
Features
- Utilizing non-heat ultrasonic waves which does not compromise the healing and natural properties of the oils . Can also be used without oil as a humidifier
- HIGH Mist and LOW Mist
- Press the LIGHT button to shift from one color to another or set it on a specific color. Long press the Light button to turn off the light without affecting the mist.
Product Specification
| Input voltage | 24V ****0.5A |
|---|---|
| Rated power | 12W |
| Capacity | 500ml |
| Suitable range | 10m²-60m² |
Product Diagram
Remote Controller
Introduction:
Note:
Please remove the insulation sheet on the controller when you first use it.
Steps of use
How to use
Working hours
- Max. 10 hours
※ The working hours may shorten according to the variations in water
temperature, indoor temperature, and the amount of mist produced.
※ The amount of mist produced in the beginning is little due to reasons such
as water temperature and quality, and it gradually stabilizes.
MIST
-
Short press MIST button for multiple times to switch between 60min , 120min ,180min ,ON, and then press it for 1s to stop producing mist.
HIGH/LOW -
2 Mist Output Modes: Choose between high and low mist output according to your preference.
-
Press HIGH/LOW button for 1s to activate the function, the initial mode is normal mist.
LIGHT -
Press it for lighting.
-
Short press LIGHT for 1 second and it beeps before it starts to work, the default lighting mode is gradual change.
-
Short press it for 1 second again to switch to the fixed color mode, and the light stops changing colors gradually.
-
Short press it for 1 second again to choose red, blue, green, light blue, dark blue, pink purple, and white, each color has two modes – intense or weak.
-
Long press LIGHT for 2 seconds to turn off the light.
Other features
- The machine will not produce mist without water.
- When water reaches the minimum limit, the machine will automatically shut off.
- Button sound mute operation: press and hold the “LIGHT” button for 5 seconds you will hear the sound “beep beep”, the diffuser switch to mute mode. Press and hold “LIGHT” button for 5 seconds again to recover the sound.
Trouble Shooting
In case of failure, please confirm the following before looking for maintenance
No current, or just a momentary current input No current, or
just a momentary current input| ■Is there water in the tank? Is water enough?
■Is there water in the tank? Is water enough?
→Please add water in the tank.
In shortage of water, press MIST and it beeps for three times before the
machine stops.
■Is the connection of the AC adapter OK?
→Please add water in the tank.
In shortage of water, press MIST and it beeps for three times before the
machine stops.
■Is the connection of the AC adapter OK?
→Please confirm the connection between the machine and the socket.
→Please confirm the connection between the machine and the socket.
To be safer, please unplug the DC plug from the main body, replug it and
ensure the input of current.
To be safer, please unplug the DC plug from the main body, replug it and
ensure the input of current.
---|---
No mist; hard to produce mist; too much mist; quick power-off No mist; hard to
produce mist; too much mist; quick power-off| ■Is the water enough in the
tank?
■Is the water enough in the tank?
→Please add water to the tank.
→Please add water to the tank.
■Is the water too much in the tank?
■Is the water too much in the tank?
→The mist production may go wrong when the water exceeds 500ml.
→The mist production may go wrong when the water exceeds 500ml.
■Is the ultrasonic vibrating plate dirty?
■Is the ultrasonic vibrating plate dirty?
→ Please clean the inside of the tank.
→ Please clean the inside of the tank.
■It is hard to produce mist if the ultrasonic vibrating plate is stuck with
bubbles.
■It is hard to produce mist if the ultrasonic vibrating plate is stuck with
bubbles.
→ Power it off, and remove the bubbles around the ultrasonic vibrating plate
with cotton bud.
→ Power it off, and remove the bubbles around the ultrasonic vibrating plate
with cotton bud.
■Are the upper case and lower case of the main body properly closed?
→Make sure that the upper case is closed.
The mist production may go wrong in case that the case of the main body is
unfitting with the bottom base.
■Are the upper case and lower case of the main body properly closed?
→Make sure that the upper case is closed.
The mist production may go wrong in case that the case of the main body is
unfitting with the bottom base.
■Is the air supply intake dirty?
■Is the air supply intake dirty?
→The air supply decreases when there is dust on the air supply intake, and it
will become harder to produce mist.
→The air supply decreases when there is dust on the air supply intake, and it
will become harder to produce mist.
■High-temperature and lower temperature?
■High-temperature and lower temperature?
→
The amount of mist increases even though the water added exceeds the max.
waterline: 500ml. In the 360’mode, the machine may be cut off due to the lack
of water, which is not considered as a failure.
→
The amount of mist increases even though the water added exceeds the max.
waterline: 500ml. In the 360’mode, the machine may be cut off due to the lack
of water, which is not considered as a failure.
→
The amount of mist decreases sometimes, which is not considered as a failure.
→
The amount of mist decreases sometimes, which is not considered as a failure.
Water leakage of the main body Water leakage of the main body| Check the
water tank inside, if any broken, please stop use and contact the seller for
a replacement.
Check the water tank inside, if any broken, please stop use and contact the seller for a replacement.
About repairing & spare parts
LED
- LED can be used for a very long time, and doesn’t need to be changed. Please understand that LED cannot be replaced when it cannot light up due to losses of other parts of the machine.
※For other repairing, please confirm in the After sale Service.
About the dealing of spare parts
- Please contact distributors for the dealing of spare parts such as the AC adapter.
Get In Touch
Our team would love to chat or help with anything we can!
Please contact email:
support@huayulianda.com
Kaili Top Limited
Lytchett House, 13 Freeland Park, Wareham Road, Poole, Dorset, United Kingdom,
BH16 6FA
Email: kailitopuk@outlook.com
C&E Connection E-Commerce (DE) GmbH
Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
Email:info@ce-connection.de
**** Manufacturer: Shenzhen Huayu Lianda Network Technology Co., Ltd.
Address: A803, No.8 Changfa Middle Road, Yangmei Community, Bantian Street,
Longgang District, Shenzhen
Made in China
Documents / Resources
|
Moisturnt HY-X500-01 Oil Diffuser
Guidebook
[pdf] Instruction Manual
HY-X500-01 Oil Diffuser Guidebook, HY-X500-01, Oil Diffuser Guidebook,
Diffuser Guidebook, Guidebook
---|---