behringer EUROPORT MPA200BT All-in-One Portable 200-Watt Speaker with Wireless Microphone User Guide

EUROPORT MPA200BT
All-in-One Portable 200-Watt Speaker with Wireless Microphone,
Remote Control via Smart Phone, Bluetooth Audio Streaming, and Battery Operation

Important Safety Instructions

Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute a risk of electric shock.
Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modifications should be performed only by qualified personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
~~~~Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear section).
No user-serviceable parts inside. Refer servicing to qualified personnel.
~~~~Caution
To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
~~~~Caution
These service instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket,or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
18. Do not install in a confined space, such as a bookcase or similar unit.
19. Do not place naked flame sources, such as lighted candles, on the apparatus.
20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed of at a battery collection point.
21. This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly on or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones, and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/pages/support#warranty.

EUROPORT MPA200BT Hook-up

Step 1: Hook-Up
Singer-songwriter hookup with a smartphone streaming audio over Bluetooth.
Smartphone streaming audio over Bluetooth with Behringer wireless microphones.

EUROPORT MPA200BT Controls

Step 2: Controls

1. LCD SCREEN displays the current DSP module and parameter settings.

2. ENCODER KNOB toggles between Graphic and Edit modes (when pressed) and changes parameter values (when rotated).

3. SETUP button steps through parameters within DSP processing modules.

4. PROCESS button steps through the DSP processing modules.

5. EXIT button returns to the top-level DSP screen when pressed.

6. ENTER button saves changes and deactivates Edit mode when pressed.

7. WIRELESS SYSTEM LEDs indicate wireless microphone signal input.

8. WIRELESS SYSTEM USB input accepts only the Behringer wireless microphone receiver.
   NOTE: The wireless USB input works in parallel with the INPUT ½ analog inputs, which means the wireless microphone signal can be heard at the same time as audio coming in through the INPUT ½ connections. We recommend you unplug the INPUT ½ connections in order to hear the wireless microphone signal alone.

9. MP3 audio jack accepts audio from phone or media player using a 3.5 mm (1/8″) plug.

10. INST/MIC IN combo jacks accept input signals over XLR balanced, ¼” TRS balanced, or ¼” TS unbalanced connectors.

11. OUTPUT jack sends a combined signal from all inputs (INST/MIC IN jacks, wireless microphone, Bluetooth, and MP3) out over a balanced XLR connection.

12. The POWER switch turns the unit off and on.

13. POWER SOURCE jack accepts the included IEC cable.

Charging the battery
The MPA200BT ships with a rechargeable, internal battery that can power continuous audio playback for up to 20 hours. We recommend that you fully charge the battery before your first use.
To charge the battery for the first time, follow this procedure:

1. Turn off the MPA200BT by pressing the POWER switch.
2. Connect the unit to an AC power outlet. The LCD screen will display to indicate the battery is charging.
3. Keep the unit plugged into AC power until the LCD screen displays to indicate the battery has been fully charged.

NOTE: The MPA200BT uses a sealed lead-acid gel battery, and the battery will slowly self-discharge when the MPA200BT is not in use. Before storing the MPA200BT for an extended period, fully charge the battery before storage, and then charge again every 3 months.
N OTE: The lead-acid battery needs to be recharged every 3 months for continued operation. Please replace the battery if the MPA200BT operating time noticeably decreases, even after a full charge cycle.

EUROPORT MPA200BT Getting started

Step 3: Getting started

1. Connect the MPA200BT to a power outlet by using the included IEC power cable.
2. Connect all-analog microphone, instruments, and/or 1/8″ stereo cables to their respective input jacks. Make sure all outboard audio gear is switched off for now.
3. Power up the MPA200BT by pressing the POWER switch to the “on” position. The startup screen will appear on the LCD display. ****
4. Mute the main output volume by going to the VOLUME screen in the DSP and rotating the ENCODER KNOB until the volume setting shows “MUTE” on the LCD screen.
5. If you are using Behringer wireless microphones, plug the wireless dongle into the WIRELESS SYSTEM USB input. The WIRELESS SYSTEM LEDs will light up when the wireless microphones become active.
6. Mute all audio inputs by going to the INPUT screen and reducing the gain for each input with the ENCODER KNOB until each input displays the “Mute” setting.
7. Power up any outboard audio gear connected to the MPA200BT.
8. Raise the volume back up to a low-to-medium setting in the VOLUME screen to begin setting input levels.
9. Set microphone levels by going back to the INPUT screen. Speak or sing into each microphone while raising each mic’s respective gain level (A or B) with the ENCODER KNOB until you find a comfortable gain level that does not distort the audio signal.
10. If you intend to stream Bluetooth audio, go to the Bluetooth Streaming section of this Quick Start Guide and follow the setup instructions.
11. Set MP3 and Bluetooth levels by going to the INPUT screen and raising/lowering the MP3 and BT gain settings until you find comfortable level settings.
12. Go to the MODE screen and choose an equalization preset that suits your needs (Music, Live, Speech or Club).
13. Go to the EQ screen and adjust the Bass, Mid, and Treble settings if you need to make further equalization adjustments.
14. Make final volume adjustments by going to the VOLUME screen and rotating the ENCODER KNOB until you find the desired final volume level.

Bluetooth Connection

To stream audio from a Bluetooth-enabled device, you will need at least one MPA200BT speaker and an iPad/iPhone/Android/Windows device with basic Bluetooth connectivity.
With a streaming-only Bluetooth connection, all related MPA200BT DSP functions must still be controlled directly from the MPA200BT rear panel via the rotary encoder.
For Apple iOS or Android devices, you can also download our dedicated Behringer Live Control app from the App Store. The app allows you to fully control a single or stereo pair of MPA200BT speakers, including all DSP functions, remotely from your iOS or Android device (see “Bluetooth Control” below for more information).
*iPad and Apple are trademarks of Apple Inc. Android is a trademark of Google Inc. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

Bluetooth Streaming
To stream Bluetooth audio with any Bluetooth device (iPad/iPhone/Android/Windows, etc.):
Mono Operation

1. Enable Bluetooth on your remote device.
2. Switch on your MPA200BT speaker and minimize the volume.
3. Press SETUP and enter the Bluetooth menu.
4. Select “Pair device” from the MPA200BT speaker’s Bluetooth menu.
5. Check that your remote device is searching for a connection.
6. Once your device detects the MPA200BT speaker, select the MPA200BT speaker from your remote device’s menu (e.g., “Behringer MPA200BT”).
7. Wait until the remote device shows an active connection, and then check the speaker’s Bluetooth menu, which should display the name of the remote device (e.g., “Xperia Z5 Compa”).
8. Bluetooth music can now be streamed to your MPA200BT speaker. The stereo signal will automatically mix down to mono.
9. The MPA200BT speaker will display the Bluetooth indicator on the main, top-level DSP screen.

Stereo Operation

1. Complete the steps above to connect the first speaker to Bluetooth audio.
2. The first connected speaker automatically becomes the MASTER speaker.
3. Switch on the second speaker, which becomes the SLAVE speaker.
4. Select “Link speaker” from the SLAVE speaker’s Bluetooth menu.
5. The SLAVE speaker will display “Slave linking…”
6. Select “Link speaker” from the MASTER speaker’s Bluetooth menu.
7. The MASTER speaker will display “Master Linking…”
8. WAIT for the speakers to link.
9. Once the linking process is complete, Bluetooth audio will stream to the two speakers. The MASTER speaker will receive the left channel, and the SLAVE speaker will receive the right channel.
10. MASTER and SLAVE connections will be indicated on the main, top-level DSP screens.

Bluetooth Control
A dedicated iOS/Android Live Control app for Behringer Bluetooth-enabled speakers can be downloaded from the Apple Store and Android market.
When connected with an MPA200BT speaker, the Live Control allows full remote control over all DSP functions, including Bluetooth streaming. Bluetooth streaming can be done in parallel with analog audio and sent to both mono and stereo setups.

• In both mono and stereo mode, first, pair the MASTER speaker, and then launch the control app.
• If the Live Control app is connected to the speaker, you will see the following DSP screen:
• The Live Control app will automatically detect and adapt for mono or stereo mode.
• To alter the speaker settings, swipe the screen or press the settings icon. All MPA200BT speaker settings can be accessed from the control app.

Operation with Bluetooth Pairing and Audio Streaming

• In both mono and stereo mode, first, pair the MASTER speaker, and then launch the Live Control app.
• The Live Control app will automatically detect and adapt for mono or stereo mode.
• To alter the speaker settings, swipe the screen or press the settings icon. All MPA200BT speaker settings can be accessed from the Live Control app.

Setting Up the Live Control App Connection

• Power on the first (usually left-hand) speaker. This speaker will become the MASTER speaker.
• Start the Live Control app on the IOS/Android device.
• Check that the Live Control app is connected and functioning with the single MASTER speaker.
• Power up the second speaker. This speaker will become the SLAVE speaker.
• Check that the main app page shows both MASTER and SLAVE input and balance control.

Firmware Update via App
Where possible please update your MPA200BT firmware using the Live Control app.
To update, go to the Settings Page in the app and look for the “CURRENT FIRMWARE” section. The Live Control app will detect the current firmware version. If a firmware and automatically check for updates provided that the remote device has access to the Internet. If a newer firmware version is available the app will offer to download. For example:

• Swipe the updated slider toward the right to initiate the firmware update. The update may take several minutes.
• Update progress will be displayed on the app and the MPA200BT speaker’s LCD screen.

Firmware Update Fallback Procedure
In the event that the system cannot be updated using the Live Control app, you may also carry out the update using this fallback procedure:

1. Download the .dfu file with the new firmware version to your remote device from the download section of the respective Behringer product page.

2. Prepare the MPA200BT for a Firmware upgrade by following these steps:
   a. Power off the speaker.
   b. Hold the ENCODER KNOB.
   c. Power on the speaker. You will see the following screen: d. Please select the option “Firmware upgrade” then press the ENCODER KNOB.
   e. The MPA200BT is now ready for the firmware upgrade.

3. On your remote device, select and hold the .dfu file until a pop-up window offers options for file transfer.

4. Select the option for sharing via Bluetooth. (NOTE: Some devices need to be paired with the speaker before file transfer.)

5. Select the MPA200BT speaker for file sharing via Bluetooth.

6. During the file transfer, the LCD screen will display the download progress.

7. After the file transfer is complete, the MPA200BT speaker will automatically restart and return to the usual startup screen.

DSP Menu

indicator shows the level for all inputs, while the right level indicator shows the output level.
Rotate the ENCODER KNOB to adjust the master volume control.
Press the ENCODER KNOB to enter the main menu.
Displays the following Bluetooth status information:
• Bluetooth symbol indicates a connection to audio and remote control device (iPhone*, etc.)
•  indicates that the remote Live Control app is
connected.
• indicates audio streaming is connected.
• “M” or “S” below the Bluetooth symbol indicates that the speaker is linked to another MPA200BT speaker as Master (left channel) or Slave (right channel)
| | VOLUME| Rotate the ENCODER KNOB to change the output volume.
| | MODE| Selects from 4 equalizations presets, depending on function and music type.
| | INPUT| Sets input mixer gain for analog input A and B, MP3 audio jack, and Bluetooth.
| | EQ| Allows adjustment of 3-band equalizer with Bass, Mid and Treble control.
| | BT| Let’s pair the speaker with mobile Bluetooth devices and link to another MPA200BT speaker as Master/Slave.
| | SETUP| Sets front logo illumination, LCD back panel contrast, device lock, and master reset to restore factory settings.
| | INFO| Displays model and firmware information.
Exit| | EXIT| Returns to the main screen.
| | CHARGING| This indicates the battery is charging when the loudspeaker is plugged in but powered off.
| | Firmware Update| Indicates device is updating firmware from Live Control app software via Bluetooth.

Specifications

Amplifier

Maximum output power| 200 W
Type| Class-D
Loudspeaker / System Data
Woofer| 8″
Tweeter| 1″
Frequency response| 70 Hz to 20 kHz (±3 dB)
Audio Inputs
Input type| 2 x XLR / ¼” TRS combo jacks (servo-balanced)
Input impedance (XLR)| 2 kΩ, balanced / 20 kΩ, unbalanced
Input impedance (¼” TRS)|  1MΩ, unbalanced
Max. input level| -9 dBu balanced / +15 dBu unbalanced (XLR / ¼” TRS)
Max. MP3 input level| +10 dBu (stereo)
Digital Signal Processor (DSP)
Display| LCD 128 x 32, amber backlit
DSP panel controls| Rotary Push Encoder
Buttons for Process, Setup, Exit and Enter
Input trim| -∞ to + 10 dB
Bluetooth control| -∞ to 0 dB
MP3 level control| -∞ to + 10 dB
Main level control| -∞ to + 10 dB
Audio optimization| Music, Live, Speech and Club modes
Bass| -10 dB to + 10 dB @ 80 Hz, Shelving
Mid| -10 dB to + 10 dB @ 2 kHz, Parametric, Q = 0.5
Treble| -10 dB to +10 dB @ 12 kHz, Shelving
Wireless System
USB dongle| USB socket accepts signals from ULM300USB
Signal indicator LED| 2 (green)
Bluetooth / MP3**
Frequency range| 2400 MHz ~ 2483.5 MHz
Channel number| 79
Version| Bluetooth spec 4.0 compliant
Max. output power| ≤10 dBm
Compatibility| Supports GATT, A2DP 1.2 profiles
Battery Supply
Built-in rechargeable battery| 12 V DC / 12 Ah
Charging time| appr. 8-10 hours
Battery operating time **| up to 20 hours
AC Power Supply
Type| Switch-mode auto range power supply
Mains voltage| 100-240 V, 50/60 Hz
Power consumption @ 1/8 max power| 100 W
Mains connection| Standard IEC receptacle
Dimension / Weight
Dimensions (H x W x D)| 420 x 280 x 257 mm (16.5 x 11.0 x 10.1″)
Weight| 12.1 kg (26.6 lbs)

Independent of limiters and driver protection circuits.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by Music Tribe is under license.
Depending on the output power.

Other important information

1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at  musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.

FEDERAL COMMUNICATIONS COMMISSION
COMPLIANCE INFORMATION
Behringer
EUROPORT MPA200BT
Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 122 E. 42nd St.1, 8th Floor NY, NY 10168, United States
Email Address: legal@musictribe.com
FCC ID: QWHMPA200BT
EUROPORT MPA200BT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Hereby, Music Tribe declares that this product is in compliance with Directive 2014/53/EU, Directive 2014/30/EU, Directive 2014/35/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 6 Lloyds Avenue, Unit 4CL London EC3N 3AX, United Kingdom

We Hear You

Documents / Resources

| behringer EUROPORT MPA200BT All-in-One Portable 200-Watt Speaker with Wireless Microphone [pdf] User Guide
EUROPORT MPA200BT All-in-One Portable 200-Watt Speaker with Wireless Microphone, EUROPORT MPA200BT, All-in-One Portable 200-Watt Speaker with Wireless Microphone, EUROPORT MPA200BT All-in-One Portable 200-Watt Speaker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>