Shenzhenshi Youer Keji Youxiangongsi RAVESOUND X1 True Wireless Earbuds User Manual
- June 6, 2024
- Shenzhenshi Youer Keji Youxiangongsi
Table of Contents
Shenzhenshi Youer Keji Youxiangongsi RAVESOUND X1 True Wireless Earbuds User Manual
1 What’s in the Box
2 Product Diagram
- Touch button control zone
- Microphone
- Earbuds LED indicator
- Charging contactor
- USB-C charging port
- Charging case
- Charging dock
- Charging case indicator
3 Charging
-
Place earbuds back into the charging case to activate the case battery level LED indicator.
-
Place earbuds back into the charging case and the earbuds will start charging.
-
Fully charge both the earbuds and the charging case before the first-time usage.
-
Fully dry off the earbuds and the USB port before charging.
4 Specifications
5 How to Fit
Note: If the earbuds is not worn correctly, they may affect the bass effect.
- Choose the ear tips that fit your ears the best.
- Identify the left and right earbuds.
- Insert the earbuds into the canal of your ears.
- Turn and find the most comfortable position.
6 Pairing Your Earbuds
- First-time Pairing with Device
Step 1: Remove both earbuds from the charging case simultaneously and the earbuds will automatically power on and enter into pairing mode.
Step 2: Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices.
Step 3: Select “RAVESOUND X1” from the list of Bluetooth devices shown (if a password is needed, type `0000′).
Notes:
- The earbuds will automatically connect with the device they were last paired with when pick up the earbuds from the charging case.
- Each earbud could be used independently.
2.Connect to a New Device
Step 1. Unpair the earbuds from the Bluetooth-enabled device that’s connected.
The earbuds will disconnect from the current device and enter into pairing
mode for another pair.
Step 2. Search on the new device and connect.
7 Functions
Open the charging case and pick up the earbuds, the earbuds will automatically power on. Place the earbuds back into the charging case, the earbuds will automatically power off.
Note: If the earbuds is not connected to any device, they will automatically power off after 5 minutes for save the battery life.
Note
- Turn on the game mode can drop latency to as low as 100ms and improve the playing game and video experience, but it will shorten the connection distance. We suggest you turn off the game mode when you use the earbuds for music.
- The normal mode provide latency about 200ms.
- Bluetooth technology can’t eliminate latency.
8 Earbuds LED Indicator
9 Reset and Reconnecting
If you fail to build connection between two earbuds, or between earbuds and Bluetooth device, please try the following steps:
- Place both earbuds into the charging case.
- Keep the charging case open, touch and hold the button on each earbud at the same time for at least 10s until they flash alternately in white for 3 times then earbuds have been reset successfully.
- Pick up both earbuds to power on, then delete the old connection from the Bluetooth device and reconnect “RAVESOUND X1”.
10s
10 Troubleshooting
Q: Can I use both earphones separately?
A: Yes, each earbud could be used independently.
Q: The earphones are turning on, but it doesn’t connect to my device?
A: To connect the earbuds to your device, please check if the Bluetooth of the
device is on at first, then select ‘RAVESOUND X1’ on the Bluetooth list to get
paired. If the earbuds still can’t connect to your device, please try to reset
it, or contact our customer support.
Q: Why the connection is not stable and cuts out intermittently?
A: Please make sure there are no objects between the earphones and your
Bluetooth device, and make sure there is no radio or WIFI interference nearby.
Q: What is the range of Bluetooth earphones?
A: Bluetooth earphones have maximum range of 49 feet (15m, no obstacle).
However, the actual range will depend on usage and environment.
Q: Is there volume control on the earphones?
A: Yes, touch L earbud once decreases the volume and touch R once could
increase it.
Q: My earphones will not switch on.
A: Please recharge it and make sure it has enough battery power. If it is
fully charged and still nothing happens or if you are not able to charge the
unit, please contact our customer support for warranty cover.
Q: Is the charging case waterproof?
A: No, the earbuds are IPX5 sweat waterproof, but the charging case is not
waterproof.
Q: Will the earbuds shut off automatically?
A: The earbuds will remain on as long as they are connected to a device. If no
audio is in use, they will enter power-saving mode and wake up once audio is
played. If the earbuds are not connected with any devices, they will
automatically shut off in 5 minutes.
Customer Service
For FAQS and more information Please Email to: service@rave-
ound.com www.rave-sound.com
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. This
device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
CAUTION
Risk of explosion if the battery is replaced by an incorrect type Disposal of
a battery into fire or a hot even, or mechanically crushing or cutting of a
battery, that can result in an explosion; Leaving a battery in an extremely
high temperature surrounding environment that can result in an explosion or
the leakage of flammable liquid or gas; A battery subjected to extremely low
air pressure that may result in an explosion or the leakage of flammable
liquid or gas.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
BLUETOOTH
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Shenzhenshi Your Keji Youxiangongsi is
under license.
Other trademarks and trade names are those of their respective owners.
EU Declaration of Conformity
Shenzhenshi Your Keji Youxiangongsi hereby declares that this equipment is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU and RoHS 2011/65/EU Directive. The declaration of
conformity may be consulted in the support section of our Web site, accessible
from www.rave-sound.com
UK Declaration of Conformity
Hereby, [ShenzhenShi YouEr Keji Youxiangongsi] declares that the radio
equipment type [X1] is in compliance with UK Radio Equipment Regulations (SI
2017/1206). The full text of the declaration of conformity is available at the
following internet address: www.rave-sound.com
MODEL: X1 FCC ID: 2A3J4-X1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>