VEEKEI VK-WSIC208 YI IOT Smart Camera Instruction Manual
- June 6, 2024
- VEEKEI
Table of Contents
YI IOT
Thank you for using YI IOT smart camera
Product introduction
Packing list: YI IOT Smart Camera × 1, Manual × 1, USB Power Cord × 1, Power Adapter × 1, Screw Accessories Package x 1
Basic Parameters
Product Name: YI IOT Smart Camera
Lens: 110°wide angle
Pixel:2.0MP
Video Compression: H.264 High Profile
Image Enhancement: Digital Wide Dynamic 3D Noise Reduction
Local storage: MicroSD card
Wireless Encryption: WEP/WPA/WPA2 Encryption
Power input: 5V 1.6A
Total power consumption: 3.5W (Max)
Wireless standard: 2.4G 802.11 b/g/n
Support Platform: Android/iOS
Component description
Reset Button Press and hold Reset for about 5 seconds. When the horn sounds
short voice, the reset is successful.
It is recommended to insert an 8-64GB high-speed Micro SD card, otherwise, it
will not be able to store, view historical video and support Important
functions such as firmware upgrading.
Install APP
Download APP: scan the QR code below to download and install.
Register and log in: open the YI IOT APP to register and log in according to
the prompts.
http://www.yunyiiot.com/yunyiapp
Add The Device
Please make sure that there is available Wi-Fi and the Internet is connected.
Find the USB port on the bottom of the device and plug in the power cord to
power it on, please wait 20 seconds until you hear “DiDiDi”
Then go to the APP home page, click the “+” on the main screen, Configure
according to the instructions in the APP. You can configure multiple cameras at
the same time
APP Video Browsing Details
- Preview Mode
- Recording
- Mute button
- Intercom button
- Cloud Storage
- More settings
- Floating window
- Full-screen preview
- History file(Make sure insert Micro SD card )
- Snapshot
Matters Need Attention
Try to keep away from the metal space;
Avoid the furniture, microwave oven blocked;
Avoid the space where the audio, video, and data lines are wound, and keep the
space away from them as large as possible;
Ensure that as close as possible to the coverage of wireless Wi-Fi signals.
Switching network environment;
In the new network environment, please press the reset hole for about 5
seconds, After hearing the horn sounds short voice and then connect to the
network。
YI IOT Smart camera Three packs of certificates
The YI IOT Smart camera after-sales service is strictly based on the “People’s Republic of China Consumer Rights Act” and “China The “Product Quality Law of the People’s Republic of China” implements the after-sales three-package service. The service content is as follows:
- Within 7 days from the date of your receipt, this product has a performance failure listed in the “Product Performance Failure Chart”The situation is determined by the after-sales service center, and return or replacement service can be enjoyed for free;
- Within 8 to 15 days from the date of your receipt, this product has the performance listed in “Product Performance Failure Table”The fault condition is determined by the after-sales service center and can be exchanged for free or repaired service; Within 12 months from the date of your receipt, this product has expert danced the performance failures listed in the “Product Performance Failure Table” The situation is determined by the after-sales service center and free repair service is available.
Product performance failure table
| name | Performance failure |
|---|
YI IOT
Smart
Camera| Damaged shell due to structural or material problems
The new device cannot be turned on normally.
The new device can not take video, connect to the phone, the button is invalid
(inserting Mirco SD card)
New device camera image fuzzy imaging abnormality, abnormal video
Non warranty regulation
- Unauthorized repairs, misuse, collisions, negligence, abuse, fluids, accidents, alterations, inaccuracies Use accessories other than this product or tear, alter stickers, security labels
- Has exceeded three packs of validity；
- Damage caused by force majeure;
- Does not meet the performance failures listed in the “Product Performance Failures”;
- Due to human factors, this product and its accessories have caused the performance failures listed in the “Product Performance Failure Table”.
The name and content of the harmful substances in the product
| Part Name | Harmful Substance |
|---|---|
| pb | Hg |
| shell | 0 |
| Board | X |
| charger | 0 |
| annex | 0 |
This form is based on the provisions of SJ/T 113640
This product conforms to RoHS environmental protection requirements.
At present, there is no mature technology in the world to replace or reduce
the lead content in electronic ceramics. porcelain, optical glass, steel, and
copper alloy.
Maintenance records:…………………………
Maintenance time:…………………………….
Fault conditions:…………………………Fault cause：
Troubleshooting:…………………….
Return and exchange proof:………………………….
Date of validity:…………………………………
Original device ID:…………………………..
New device ID:……………………….
maintenance personnel Signature:………………………..
Maintenance Department seal:………………………….
Maintenance records:…………………………
Maintenance time:…………………………….
Fault conditions:…………………………Fault cause：
Troubleshooting:…………………….
Return and exchange proof:………………………….
Date of validity:…………………………………
Original device ID:…………………………..
New device ID:……………………….
maintenance personnel Signature:………………………..
Maintenance Department seal:………………………….
Maintenance voucher of intelligent
Customer: ………………………..Mobile:………………………..
Address:…………………………….
Model: ………………………..camera ID:……………………………
Device store: ……………………………Date of purchase:………………………….
Store address:……………………………..
Store contact number:………………………..
Maintenance voucher of intelligent
Customer: ………………………..Mobile:………………………..
Address:…………………………….
Model: ………………………..camera ID:……………………………
Device store: ……………………………Date of purchase:………………………….
Store address:……………………………..
Store contact number:………………………..
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile devices:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>