CHAMPION 201004 7500W Wireless Remote Start Generator User Guide

June 6, 2024
Champion

CHAMPION logo

CHAMPION 201004 7500W Wireless Remote Start Generator

CHAMPION 201004 7500W Wireless Remote Start Generator

WARNING: Read the ENTIRE operator’s manual to become familiar with the features of the product before operating.
Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury or even death.

www.championpowerequipment.com
© Champion Power Equipment 2021.
All Rights Reserved.

Set Up

  1. Open shipping carton. Assembly > Unpackingsetup

  2. Attach wheel kit. Assembly > Install the Wheel Kitsetup 1

  3. Connect the battery. Assembly> Connect the Battery.
    Cut cable tie on each side of battery connector.
    Push two halves of battery connector together tightly.setup
2

  4. Add oil. Assembly > Add Engine Oil.
    Recommended: 1 OW-30, up to 37.2 fl. oz. (1100 ml) DO NOT overfill.setup
3

  5. Move the generator outdoors.

    • Move generator to an open, outdoor area.
      Point exhaust away. Never run generator in enclosed areas (e.g., not in house or garage).

    • Keep all objects at least 5 feet (1 .5 m) from generator. Heat from the muffler and exhaust gas can ignite combustible materials.setup 4

  6. Add fuel. Assembly > Add Fuel DO NOT use E15 or E85.setup 5

  7. DO NOT plug in any electrical devices. WARNING: NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!

  8. Turn the fuel valve “ON”.setup 7

  9. Wireless Start

  10. Push the battery switch to the “ON” position.

  11. Push the ignition switch to the “ON” position.

  12. Press and release the “START” button on the remote key fob.setup 8 Electric Start
    1. Push the battery switch to the “ON” position.
    2. Press and hold the ignition switch to the “START” position.setup
9 Manual Start
    1. Move the choke lever to the “CHOKE” position.
    2. Push the ignition switch to the “ON” position.
    3. Pull the starter cord.
    4. Move the choke lever to the “RUN” position.setup
10

  13. Plug in. Operation > Connecting Electrical Loads.

setup 11

Visit our YouTube channel to watch our how-to videos and subscribe to view our latest videos on our Champion Power Equipment products!

1·877·338·0999
CHAMPIONPOWEREQUIPMENT.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Champion User Manuals

Related Manuals