Takki T88 Portable Power Station Instruction Manual

Portable Power Station

Instruction Manual

ABOUT THE UNIT

Thank you for applying our multi-function portable power station In case of power failure or you need to charge on travel, you can temporarily charge your electrical or digital devices with this unit. This unit can provide USB, DC, and AC output with an emergency flashlight. You can keep laptops, appliances, lights, and more going for hours longer. Before using this unit, please read the user manual carefully and properly keep it for reference.

The unit provides Modified Sine Wave output

The unit provides Modified Sine Wave output and can be compatible with AC electric appliance that works with Sinusoidal waveform(power <100W). However, anything that uses an AC motor isn’t going to work to full capacity on a modified sine wave. such as an electrical fan, It will even make the electric appliance arouse some noise. Appliances like refrigerators, microwaves, and compressors that use AC motors and some delicate medical equipment will be better off with a pure sine wave inverter. This product is only used for emergencies, it cannot replace the normal alternating current, for long-term use, please adapt the power station specification required by electrical appliances.

PRODUCT PARAMETERS

USB TYPE C Output: 5V/3A,9V/3A,12V/2.5A,15V/2A,20V/1.5A(PD 30W)
DC Output| DC Output DC 12V-16.6V/10A(13A, 150W MAX)
AC Output| 110v/60Hzt10%
AC Power| AC Continuous Output: 100W/120W Max
Bulb Type| 1 x Ultra-bright LED Flashlight
1 x LED Light Panel
Power Indicator| LED Display
Operation temperature| -10 ºC -40 ºC
Charge temperature| 0 ºC -40 ºC
Lifecycle| >500 times
Package includes| 1 x Portable Power Station
1 x Cigarette Lighter1 x power adapter
1 x User Manual1 x Car Charger

※ There may be some differences in different spare parts. Please adhere to the actual product instead.

PRODUCT DESCRIPTION

|
---|---

PRODUCT INSTRUCTION

1. Now to provide power for DC12V appliances(such as headlamps, fans) with this product?

Plug your appliances into the DC output port and press the power switch button to gain power. DC output rated Current:10A, Max output Current<13A.

Notices: Please confirm whether your DC12V appliance support charging with 5.5mm/2.1mm

DC header interface (The diameter of the DC Port of the Product is: 5.5mm/2.1mm), otherwise it is unable to connect with the DC output, you can consult the electrical manufacturer, buy the corresponding adapter and connect with it.

WARNING!

※ Note: The DC output voltage ranges between 12V–16.6V, the maximum output current is 13A. DC output voltage drops or increase while battery capacity drops or increases due to the chemical characteristics of the battery. If your appliance is not built-in input voltage stabilizing function, it may shut down when the input voltage is too low or too high. If your 12V devices can not work due to the input voltage being too high, please read the device manual or consult the device manufacturer to get the input voltage range of your device.

Protection Mode:

Short-circuit/Overpower Protection: If the DC output is short-circuited or overpowered(Load(s) power>150W), the unit will shut down to protect itself. Please clear the problem and press the power button of the unit to recover from protection mode.

2) How to provide power for AC appliances with this product?

Connect the power cable plug of the electrical appliance to the AC outlet of the product, switch on the power button and the unit will start providing power to your appliances.

WARNING! The Ac outlets, AC voltage, and frequency are different according to different countries; please carefully check whether the product specifications are consistent with the appliance specifications before use, otherwise, it can lead to dangerous situations.

When the AC port is not in use, turn it off to conserve power.

Protection Mode:
Short-circuit/Overpower Protection: If the AC output is short-circuited or overpowered(Load(s) power>100W), the unit will shut down AC output to protect itself. Please clear the problem and re-press the AC button for AC output.

X Some devices, such as refrigerators, ice makers, or laser printers may require surge power to start or work during a very time period, the surge power could exceed 120W or even higher, this could cause overpower protection with this unit. Please remove the devices and consult with the device manufacturers for more information. Please clear the problem and re-press the AC button for AC output.

3) How to provide power for USB(C) digital appliances with this product?

Connect the standard USB cable of the digital appliance to the USB output of the unit, press the ” ” to turn on USB output.

Notice: Some smart devices, such as Bluetooth headphones and LED lights. require very small input current to charge, which could be less than 150mA. The unit may fail to charge this kind of smart device due to detection current limitations by the USB output ports. On this occasion, the user can press the AC button ” AC ‘ to keep the USB port output running. Please turn off AC output when the smart devices are fully charged to save power.

Quick Charge Output: This product supports 5V/2.1A,9V/2A, 18W Qualcomm QuickCharge 3.0 output and USB C PD(Power Delivery) 5W3A,9W3A,12V/2.5A,15V/2A,20V/1.5A,PD 30W Output, for smart devices which also support Qualcomm QuickCharge 3.0 or USB PD Protocol. The actual output voltage and current depends on the actual smart devices, it can be obtained by consulting the smart device manufacturer.

4) How to use the flashlight

This unit is a built-in ultra-bright LED light panel. Press the “ button to switch on the led light panel and single press the button to switch higher brightness. Support up to 4 levels of brightness. Long press the button for 3 seconds to switch on the led torch, single press the button again to switch to SOS mode, press the button again to switch off the torch.

WarninglDo does not point directly at the eyes of humans in **case of any damage due to the strong light.

**

5) How to charge the unit?

a.Charge through AC Wall Charger

Using the included AC Wall Charger, plug the unit into any wall outlet to charge the unit. You will know the unit is charging when the white LED battery indicators are blinking. The unit is fully charged when all battery indicators stop blinking and remain solid. After the unit is fully charged, please remove the AC wall charger in time.

b.Charge from Solar panel

1. Place your solar panel where it will get as much direct sunlight as possible.
2. Plug the output of the solar panel into the input of the unit to start charging. You will know the unit is charging when the white LED Battery Indicator lights up and blinks. The unit is fully charged when all battery indicators stop blinking and remain solid.

SECURITY AND MAINTENANCE

1. Do not short-circuit the unit. To avoid short-circuiting, keep the unit away from all metal objects (e.g. coins, hair-pins, keys, etc.).
2. Do not heat the unit, or dispose of it in fire, water, or other liquids. Keep away from high Do not expose the unit to direct sunlight.
3. Keep away from high humidity, dusty places.
4. Do not disassemble or reassemble this unit.
5. Do not drop, place heavy objects on, or allow a strong impact on this unit.
6. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
7. Children should be supervised to ensure that they do not play with the appliance.
8. Do not cover the device with towels, clothing, and another item.
9. The unit may become hot when charging. This is normal. Use caution when handling.
10. Do not charge the unit over the required time.
11. Disconnect the unit when fully charged.
12. I) Use the unit properly to avoid electronic shock.
13. Please deal with scrap products in accordance with the regulations, do not treat the built-in battery as household garbage, so as not to cause explosion and pollution.
14. The product is only used for emergency situations, it cannot replace the standard DC or AC power of household appliances or digital products.

PRODUCT APPLICATION SKILLS

1. This product is a built-in high-quality original lithium-ion battery, it has no memory effect but is high-capacity, and it is durable. However, we still recommend you to apply in the range of 10 C–30 C, so as to obtain the optimal charging capacity.
2. When charging, in order to avoid interference, please stay away from TV, radio, and other
3. If the device has not been used for a long time, please disconnect the cable and store it.
4. Some portable devices may need to be set in charge mode to charge, see the corresponding equipment user manual for more information.
5. In order to extend the life of the product (lithium battery), it is best to charge within 3 months and charge at least once within 6 months.
6. If this unit is not in charge, and the DC and USB are not in use, it will automatically shut down in 20 seconds.

Recycle

Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materials.

Battery information

Your device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery, as you may damage the device.

The battery can be charged and discharged over 500 times, but it will eventually wear out.

Statement

All rights reserved. Reproduction in whole or in part without written permission is prohibited. All other trademarks are trademarks of their respective owners. Features and specifications are subject to change without notice.

MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>