havit M9014 Full Touch Screen Fitness Watch Instruction Manual
- June 6, 2024
- havit
Table of Contents
M9014 Full Touch Screen Fitness Watch
Instruction Manual
Welcome to use our high-performance wrist-band smart bracelet which
creates a thoughtful and healthy experience for you.
Device maintenance
- Please remember the following tips when you maintain your smart bracelet:
- Clean the smart bracelet regularly, especially its inner side, and keep it dry.
- Adjust the smart bracelet tightness to ensure air circulation.
- Excessive skincare products should not be used for the wrist wearing the smart bracelet.
- Please cease wearing the smart bracelet in case of skin allergy or any discomfort.
Schematic diagram of the main body of the smart bracelet
Power-on
Long press the side button for 3 seconds or plug the smart bracelet into the
base to charge to power on.
Downloading and binding of smart bracelet APP
- Download and install APP 1. Scan QR code with a mobile phone to download APP.
- For the IOS system, select the APP store; and for the Android system, select google plays to download and install the SMART-TIME PRO.
Note: your mobile phone must support Android 5.1 or IOS 8.0 or above, and Bluetooth 4.0 or above.
Operation instruction
Bind smart bracelet with app
| 
---|---
1. Click on “Add Device” to bind the smart bracelet.| 2. Click on your
device in the device list scanned.
| 
3. When this interface appears in the APP, the watch will also show the
corresponding interface to confirm the connection later, please click the
watch to confirm.
| 
4. The IOS system will show a Bluetooth pairing request and you can click on
Bluetooth “Pairing” to confirm. Connect it directly to the Android system.|
5. Successfully bound.
6. For Apple mobile phone after binding removal, you need to click on the symbol on the right in Setting- Bluetooth and choose to ignore the device. As shown below:
Introduction of smart bracelet functions
Power-on status
Click on the touch to switch the menu interfaces of the main screen, as the
interfaces shown in the following;
Introduction of main interface functions
After the smart bracelet and APP are first paired, the time and date of the
mobile phone will be synchronized.
Step counting, distance, and calorie
The step-counting interface shows steps. Wear the smart bracelet on the wrist,
and the smart bracelet can automatically count steps, distance, and calories.
Sleep monitoring
Wearing the smart bracelet at night to automatically judge whether you are in
the sleep state, to record deep sleep and light sleep respectively, and to
summarize the total sleep time to help you monitor your sleep quality. The
sensor can measure your sleep quality according to the range and frequency of
wrist movements when you sleep.
Menstrual period
After successfully connecting to the APP, set the detailed data of your
menstrual cycle on the APP. The data will be synchronized to your watch. The
watch will help you predict the start time of the next menstrual period or
pregnancy based on your data. You quickly see the duration and changes of your
menstrual period.
Heart rate measurement
Enter the heart rate test interface, the motor will vibrate once after” Start
measurement” and” Stop”, and the current measurement data will be displayed.
Correctly wear the smart bracelet
on the wrist at 2cm of the inner side of the ulna joint to more accurately
measure the heart rate data, as shown in the right figure.
Closely attach the heart rate sensor to the skin with good contact in the measurement of heart rate. The sensor light will expose if the smart bracelet is too loose, which will cause inaccurate measurement values. DO NOT directly look at the green light of the sensor in case your eyes feel uncomfortable.
Although the product dynamically detects the heart rate at real-time, the user has to keep sitting still when the device is used for measuring heart rate; otherwise, the time for measurement of heart rate will be delayed or no data can be measured. The user should not move until the smart bracelet measures the value and then the data of real-time dynamic heart rate can be checked.
It is necessary to measure again after a rest if there is a big difference in measured data. The average value obtained through five times of consecutive measurements is more accurate.
Exercise
There are 11 kinds of sports in the sports interface, including walking,
running, cycling, rope skipping, badminton, basketball, and football.
Messages
You can view the content pushed by the message in the information interface.
At most three messages can be saved. After three messages are saved, the
messages displayed before will be replaced by new messages one by one.
Camera
After connecting with the mobile phone, the smart bracelet can be used as a
remote controller for the mobile phone camera. Open” Photocontrol” in APP to
“Shake” the smart bracelet and click on the icon to take a photo.
Find mobile phone:
When the watch is connected to the APP, the phone will make a sound after
tapping, if you want to stop, tap pause.
Frequently Asked Questions (FAQs)
-
Why does the smart bracelet automatically disconnect Bluetooth when the Android screen goes out?
1.1 Lock background APP. When the SMART TIME PRO process is cleared, the smart bracelet will be disconnected from the mobile phone.
1.2 Set APP self-startup
1.3 Unrestricted background operation. The Android mobile phone installed with the APP intelligently restricts the background operation by default, and App should be set manually without any restriction. -
Why cannot the smart bracelet receive a message push?
2.1 Please confirm that you have turned on the switch for message push at the mobile phone client.
2.2 Please confirm that messages can be displayed normally in the mobile phone notification bar. The message push on the smart bracelet is completed by reading the message from the mobile phone notification bar. The smart bracelet will not receive the message push if there is no message in the mobile phone notification bar. (You need to find notification settings in the mobile phone settings, and turn on the notification switch of WeChat, QQ, call, SMS, and mobile phone client).
2.3 Turn on the mobile phone — Settings. Enter “Notification use right” on the top search box, re-open SMART TIME PRO. -
Why can’t take a hot bath with the smart bracelet?
Answer: the bathwater has a relatively high temperature, and generates a lot of vapor which is in the gas phase with a small molecular radius and can easily infiltrate into the smart bracelet from the shell gap. When the temperature drops down, the vapor will condensate into liquid-phase droplets which will easily cause the short circuit inside the smart bracelet and damage the circuit board and then damage the smart bracelet.
Note: for more FAQs, please refer to SMART TIME PRO APP feedback.
Warning:
Please consult your doctor before you take a new sport. The smart bracelet
should not be used for any medical purpose though it may dynamically monitor
the heart rate at real-time.
Packing List
| Main body of the smart bracelet | 1 |
|---|---|
| Wrist band | 1 |
| Charging base | 1 |
| User manual | 1 |
| Packing box | 1 |
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the Receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet the general RF exposure statement. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>