BLUETTI B300 Portable Power Station User Manual

BLUETTI B300 Portable Power Station
User Manual

Please read this manual before use and follow its guidance. Keep this manual for future reference.

BRIEF INTRODUCTION

Introduction

B300, the extension battery pack owns a 3072Wh capacity to support BLUETT! AC200MAX and AC300 series, or AC200P. AC200MAX can support up to two B300 battery packs to reach 8192Wh capacity. When connecting to AC300, the user can connect two AC300 to double the output power and capacity with Split Phase Box(P030A) at the same time! Boost up to 6,000W of continuous power, 24.6kWh capacity in total, and 10.4kW of groundbreaking solar input capability! This setup can be an emergency power center and run your home essentials for over a week, or with enough solar panels, you can even run your entire whole house, off-grid indefinitely.

ABBREVIATION

• BMS: Battery Management System
• MPPT: Maximum Power Point Tracking
• DC: Direct Current
• PV: Solar Panel(s) Charging (Photovoltaic)
• Grid: Home Power Supplied by Utility
• TS00: S00W Additional Adapter
• DOD: Depth of Discharge

SAFETY INSTRUCTION

• DO NOT place the power station near heat sources. It is prohibited to place the equipment in an environment with flammable, explosive gas, or smoke. It is also prohibited to operate the equipment in this environment.
• DO NOT attempt to replace the internal battery or any other component of the equipment by anyone other than authorized personnel. There are no end User-serviceable components.
• DO NOT operate in wet conditions. If the equipment becomes wet, please let the unit dry completely before using.
• Please ensure proper ventilation while in use and do not obstruct fan openings. Inadequate ventilation may cause permanent damage to the equipment.
• DO NOT stack anything on top of the power station while in storage or while in use.
• DO NOT move the unit while operating as vibrations and sudden impacts may lead to poor connections to the hardware inside.
• Warning: DO NOT insert foreign objects into any ports of the B300. Please use it carefully and keep children away from it.
• In the case of fire, only a dry powder fire extinguisher is suitable for the product.
• For safety purposes, please use the original charger and cables designed for the equipment. We are not liable for damage caused by third-party equipment and may render your warranty invalid.

BLUETTI APP

With BLUETTI App, the remaining capacity of B300 can be viewed remotely only when B300 has been connected to AC300/AC200Max already.
Please turn to the AC300/ AC200Max User Manual for detailed information.

IN THE BOX

Standard Accessories

(MC4 – XT90) (10A, MAX 200W)
Charging B300 via solar panels with MC4 ports.| 1
4| User Manual
Please read the manual before use and follow its guidance, keep this manual for future reference.| 1
5| Warranty Card
Please keep this Warranty Card properly.| 1
6| Certificate of QC PASS| 1

Additional Purchase Accessories
Sold on BLUETTIPOWER.COM

4](https://manuals.plus/wp-content/uploads/2022/01/BLUETTI-B300-Portable- Power-Station-Category-4-300x55.jpg)Car Charging Cable(Cigarette Lighter Port – 14C4)
Charging 0300 by vehicle, work .40% cable Mai
Lead-acid Battery Charging Cable
Charging B300 via a lead-acid battery, put the clamps on the corresponding positive&negative poles of the lead-acid battery, work with cable No.3.
D050S Charging Enhancer Kit
(Including D050S,PV,Car,Lead-acid Charging Cable)
D050S – for extra charging methods on 7909(original AC) port.
Voltage limit: 12-60VDC Input: 500W Max
Optional Output Cable| USES-C to 1158-C Cable
Swart 20Y/SA. 100W power Cl OutpUt. Ms malt applanoss in the rrudat vat WEIL part.
Cigarette lighter Port – 5521 Cable Sul for IN cloaca when 5521 input port oath as a router.
CifiWi and Ott.
Optional AC Adapter| AC Adapter
Charging B300 via wall outlet at 500W Max.

LET’S GET STARTED

• Power ON/OFF: Long press the power button to turn ON/OFF the unit, the led indicator will light up/off.
• The B300 will turn on automatically from the Power Off state when either grid charging and/or PV charging voltage is applied to the charging port.

FEATURES

1. Battery Capacity LED
   Show the remaining capacity of B300.

2. 12V/10A Cigarette Lighter Port
   Output port for devices with corresponding a plug such as vehicle-use vacuum.

3. USB-C (PD3.0, 100w) Output Port
   Can be used via USB-C to USB-C cable to charge most devices in the market such as Pixel Phone, Macbook Pro at 100W Max.

4. DC ON / OFF Button
   To turn ON/OFF the output function of B300.

5. USB-A (QC3.0) Output Port
   USB-A ports support the QC3.0 protocol.

6. Power Button
   To turn ON/OFF the B300, all the functions will be closed.

7. Battery Extension Port
   The port to connect B300 with AC300/AC200MAX/B300.

8. PV Input Port
   To charge B300 via solar powers.
   And car charging, lead-acid battery charging.

9. Charger Input Port
   To charge B300 via vehicle, extrasolar power, lead-acid battery, AC adaptor. Suitable for DOSOS.

RECHARGE

1. Solar Charging
   • Choose the solar panel with working voltage DC 12V-60V.
   • Connect the solar panel to the B300 via solar charging cable(accessory3).
   • Plug and play charging: it will start charging automatically after connecting the solar panel to the product even it is at off status.
   • Max. the current of the solar: lOA
   • B300 should be turned off after 2mins when unplugging the solar charging cable from B300.

AC Charging

The estimated fully charging time for the adapter: 6.6-7.1Hrs.

Car Charging

Dual Recharge

The estimated fully charging time for Dual Recharge: 4.9—5.4 Hrs.

AC300 + B300 EXTRA BATTERY

CONNECTION

AC300 can extend the capacity by 1—4 B300 battery pack to 3072—12288Wh.
Supports up to 4 battery packs in parallel.
AC300+B300 system will be activated when AC300 has been charged.

Step: Press Button0l and connect the battery port of AC300 with B300 through the Battery Expansion Cable (accessory No.2)
Step2: Push Button02 to LOCK the cable with either AC300 or B300.
Step3: Press the power button of both AC300 and B300.

AC200MAX + B300 EXTRA BATTERY CONNECTION

TECHNICAL SPECIFICATIONS

General Specs

Model No.| B300
Net Weight| 36.1kg (79.6Ibs)
Dimensions| 520320266mm (20.512.510.5in)
Charge Temperature| 0-40°C (32-104 °F )
Discharge Temperature| -20-40t (-4-104 °F )
Storage Temperature| -20-40t (-4-104 °F )
Working Environment Humidity| 10-90%
Capacity| 3072-12288Wh (60-240Ah)
Battery Type| LiFePO4
Standard Battery Voltage| 51.2VDC
---|---
DC Output
Cigarette Lighter Port| 1 12VDC,10A
USB-A| 1 3.6-12VDC, 3A,18W
USB-C PD3.0 supported| *1 5-15VDC,3A;
20VDC,5A,100W
AC Input
AC(through 7909 via T500)| 500W Max
Specs| 58.8VDC, 8A
PV Input
MPPT(single) Voltage Limit| 12-60VDC
Max. Power of Input| 200W
Max Input Current| 10A
Car Charging
Input Voltage| 12/24VDC
Current| 8.2A
Max Input Power| 196.8W
*Battery Port 2**
Specs| 58.8VDC, 80A

FAQ (Frequently Asked Questions)

• How to claim the warranty?
  Please refer to the warranty card you received from where you have ordered the product from.

• Can the unit be upgraded?
  When B300 has been connected to AC300, the firmware including ARM, DSP, IoT, and BMS can be upgraded online through OTA via BLUETTI APP.

• Can it be charged and discharged at the same time?

• Can I use third-party solar panels to charge the unit?
  Yes, third-party solar panels can be used as long as they utilize MC4 connectors and the combined output voltage (in series or parallel) is between 12V to 60V,200W Max.

STORAGE AND MAINTENANCE

• Please turn off the unit and charge it to 50-70% capacity every time before storing it.
• To preserve the battery health, please discharge and fully charge the unit at least once every 3-6 months.
• Ensure proper ventilation in use or store and keep away from any combustible materials or gases.
• Avoid exposing the unit to rain or wet environment, and direct sunlight (32­ 113F,0-45C ), a clean and dry environment is strongly recommended.
• Dry, non-abrasive cloths to clean the exterior from dust and debris every so often are highly recommended.
• Keep the unit away from children and pets.

DECLARATION

• Some changes may occur without notice such as external appearance or specifications due to availability of material supplies or hardware improvements of the product over time.
• BLUETT! shall not be liable for any damage caused by force majeure such as fires, typhoons, floods, earthquakes, or the user’s intentional negligence, misuse, or other abnormal conditions.
• No compensation for damages shall be made for utilizing non-standard adapters and accessories.
• BLUETT! is not liable for any damages caused by any operations of the product outside of the usage methods detailed in this manual.
• This unit is not suitable for use on the relevant equipment or machines involving:

Personal safety, atomic energy devices, aerospace devices, medical devices, etc., or any equipment or machines that require highly reliable power sources.
We are not responsible for accidents, fires, wrongful or negligent actions caused by such equipment or machines which result in damage.

Company: POWEROAK GmbH
Address: Lindwurmstr. 114, 80337
München Germany
Mail: logi@bluetti.de| Company: POWEROAK ENERGY UK CO., LTD
Address: Suite 108 Chase Business Center 39-41
Chase Side London United Kingdom N14 5BP
Mail:poweroak.eu@bluetti.com
---|---

P/N:17.0303.0401-00A0

Documents / Resources

| BLUETTI B300 Portable Power Station [pdf] User Manual
B300, Portable Power Station
---|---
| BLUETTI B300 Portable Power Station [pdf] User Manual
B300, Portable Power Station, B300 Portable Power Station
| BLUETTI B300 Portable Power Station [pdf] User Manual
B300 Portable Power Station, B300, Portable Power Station, Power Station, Station
| BLUETTI B300 Portable Power Station [pdf] User Manual
B300 Portable Power Station, B300, Portable Power Station, Power Station, Portable Station

References

• BLUETTI: Portable Power Station, Solar Generator Kit
• Homepage | Power Integrations

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>