havit M9006 Pro Personal Fitness Watch Instructions
- June 6, 2024
- havit
Table of Contents
M9006 Pro Personal Fitness Watch
Instructions
Welcome to use our high-performance wrist-band smart bracelet which creates a
thoughtful and healthy experience for you.
Device maintenance
- Please remember the following tips when you maintain your smart bracelet:
- Clean the smart bracelet regularly, especially its inner side, and keep it dry
- Adjust the smart bracelet tightness to ensure air circulation.
- Excessive skincare products should not be used for the wrist wearing the smart bracelet.
- Please cease wearing the smart bracelet r case of skin allergy or any discomfort.
Schematic diagram of the main body of the smart bracelet
Power-on
Long press the side button for 3 seconds or plug the smart bracelet into the
base to charge to power on.
Downloading and binding of smart bracelet APP
1. Download and install APP
- Scan QR code with a mobile phone to download APP.
- For the IOS system, select the APP store, and for the Android system, select Application Treasure to download and install Have Fit.
Note: your mobile phone must support Android 5.1 or IOS 8.0 or above and Bluetooth 4.0 or above
Operation instructions
Bind smart bracelet with APP
-
Click on “Add Device’ to bind Itoe email twacelol
-
Click on yot% &once in the Device list successfully.
-
The IOS system will show Bluetooth marina requests and you can click co Enuotoot ‘Pairing” to confirm. Connect it directly to the Aneroid system.
-
Successfully bound.
Remove device
-
For the Android mobile phone; the device can be disconnected from your mobile phone by simply clicking on Remove device.
-
For Apple mobile phone after binding removal, you need to click on the symbol on the right in Setting-Bluetooth and choose to ignore the device. As shown below
Power-on status
Click on the touch to switch The menu interfaces of the main screen as the interfaces shown in the following;
-
Introduction of main interface functions
After the smart bracelet and APP are first paired. the time and date of the mobile phone will be synchronized. -
Step counting, distance, and calorie
The step-counting interface shows steps. Wear the smart bracelet on the wrist. and the smart bracelet can automatically count steps, distance, and calories. -
Messages
You can view the content pushed by the message in the information interface. At most three messages can be saved After three messages are saved, the messages dismal/dart here will be replaced by new messages one by one.
-
Sleep monitoring
wearing the smart bracelet at night to automatically judge whether you are in the sleep state, to record deep sleep and light sleep respectively, and to summarize the total sleep time to help you monitor your sleep quality. The sensor can measure your sleep quality according to the range and frequency of wrist movements when you sleep.
-
Heart rate measurement
1. Enter the heart rate test interface, the motor will vibrate once after Start measurement’ and Stop”, and the current measurement data will be displayed.
2. Correctly wear the smart bracelet on the wrist at 2cm of the inner side of the ulna joint to more accurately measure the heart rate data, as shown in the right figure.
3. Closely attach the heart rate sensor to the skin with good contact in the measurement of heart rate. The sensor light will expose if the smart bracelet is too loose, which will cause inaccurate measurement values. DO NOT directly look at the green light of the sensor in case your eyes feel uncomfortable
4. Althuuyli tilt piueluut dynainiudlly detects the Pieta t rate at real lime. the user has to keep sitting still when the device is used for measuring heart rate: otherwise, the time for measurement of heart rate will be delayed or no data can be measured. The user should not move until the smart bracelet measures the value and then the data of real-time dynamic heart rate can be checked.
5. It is necessary to measure again after a rest if there is a big difference in measured data. The average value obtained through five times of consecutive measurements is more accurate.
6. The product dynamically measures the heart rate in real-time, so the heart rate is varied in different conditions, such as speaking, dining, and drinking. It should be subject to the actual case.
7. Be sure that there is no dirt at the bottom of the heart rate sensor during measurement Skin color, hair density, tattoo, and the scar may affect the accuracy of the measured results, in which cases it is necessary to re- measure the heart rate. -
Exercise
There are 7 hinds of sports in the spouts interface, including walking, running, cycling, rope skipping, badminton, basketball, and football.
-
Blood pressure
Enter the blood pressure test interface, the motor will vibrate once after Start measurement’ and” Stop”, and the current measurement data will be displayed.
The environment for measuring blood pressure Should be quiet with an appropriate temperature. The user should rest for at least 5 minutes and avoid tension, anxiety, and emotional excitement before measurement. Repeatedly measure blood pressure three times at the interval of 2 minutes Record the average of three readings
-
Blood oxygen
Enter the blood oxygen test interface, the motor will vibrate once atter start measurement’ and- stop-, and the current measurement data will be displayed.
Blood oxygen saturation (Sp02) is the percentage of the volume of oxyhemoglobin (Hb02) combined by oxygen in the blood to the volume of all (Hbhemogiobin) which can be combined, i.e, the concentration of blood oxygen In the blood.
Note: the data measured for blood pressure and blood oxygen are for reference only, and cannot be used as the basis of relevant medical purposes -
Music control
After connecting with the mobile phone, the smart bracelet can control the music player of the mobile phone. When the mobile phone plays music, you can use the smart bracelet to control the mobile phone for playing pausing, the previous song, and the next song. -
Camera
After connecting with the mobile phone, the smart bracelet can be used as a remote controller for the mobile phone camera. Open’ Photo control” in APP to `Shake’ the smart bracelet and click on the icon to take a photo.
-
Stopwatch
Enter the stopwatch page. dick on the icon “Start” below to start timing, then singly click on the icon pause to pause timing. and the icon in the under right corner is for one-key resetting. -
Weather
The weather page displays the current weather and tomorrow’s weather.
For weather information, it needs to connect with the client end
before data can be obtained. If the disconnection time is long, the weather
information cannot be updated. -
More
Click the” More icon to enter the function interface.
1. Brightness regulation Click the” More’ icon to enter the function interface.
2. Restore factory settings Click on “Confirm” to clear all data in the smart bracelet and to restore factory settings.
3.
Power-off Click on “Confirm” to turn off the smart bracelet and the smart
bracelet is in a sleep state.
More watch faces download
-
There is a timetable download market in Havefit, you can freely download your favorite watch faces.
-
The dial will display the following pattern during custom dial synchronization.
-
After synchronization is complete, the watch will automatically restart and automatically connect to the phone.
Custom dial
-
Here you can choose your favorite pictures on your phone to sync to your watch.
-
After the progress bar finishes, the dial update is complete.
-
The following pattern will be displayed during the download of the new watch face.
-
After the download is completed, the watch will automatically restart and automatically connect to the phone
Frequently Asked Questions (FAQs)
Why does the smart bracelet automatically disconnect Bluetooth when the Android screen goes out?
- Lock background APP. When the Have Fit process is cleared, the smart bracelet will be disconnected from the mobile phone
- Set APP self-startup
- Unrestricted background operation The Android mobile phone installed with the APP intelligently restricts the background operation by default, and App should be set manually without any restriction.
Why cannot the smart bracelet receive a message push?
- Please confirm that you have turned on the switch for message push at the mobile phone client.
- Please confirm that messages can be displayed normally in the mobile phone notification bar. The message push on the smart bracelet is completed by reading the message from the mobile phone notification bar. The smart bracelet will not receive the message push if there is no message in the mobile phone notification bar. (You need to find notification settings in the mobile phone settings, and turn on the notification switch of WeChat, 00, call, SLAMS, and mobile phone client).
- Turn on the mobile phone — Settings. Enter “Notification use right” on the top search box, re-open Have Fit.
Why can’t taKe a not Data with me smart bracelet?
Answer: the oath water has a relatively high temperature. and generates a lot
of vapor which is in the gas phase with a small molecular radius and can
easily infiltrate into the smart bracelet from the shell gap When the
temperature drops down, the vapor will condensate into liquid-phase droplets
which will easily cause the short circuit inside the smart bracelet and damage
the circuit board and then damage the smart bracelet.
Note: for more FAQs. please refer to Have Fit APP feedback.
Warning:
Please consult your doctor before you take a new sport, The smart bracelet
should not be used for any medical purpose though it may dynamically monitor
the heart rate at real lime.
Packing list
| The main body of the smart bracelet | 1 |
|---|---|
| Wrist band | 1 |
| Charging base | 1 |
| User manual | 1 |
| Packing box | 1 |
https://www.havit.hk/m9006-2/
Operation guide
FCC Warning
This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions;
- this device may not cause harmful interference. and
- this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception. which can De determined Dy turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet the general RF exposure statement. The device can be used in portable exposure conditions without restriction.