havit M9015 Lady’s Fitness Watch User Manual

: June 6, 2024
: havit

M9015
LADY’S FITNESS WATCH
PRODUCT MANUAL

Welcome to use our high-performance wrist-band smart bracelet which creates a thoughtful and healthy experience for you.

Device maintenance

Please remember the following tips when you maintain your smart bracelet:
Clean the smart bracelet regularly, especially its inner side, and keep it dry.
Adjust the smart bracelet tightness to ensure air circulation.
Excessive skincare products should not be used for the wrist wearing the smart bracelet.
Please cease wearing the smart bracelet in case of skin allergy or any discomfort.

Schematic diagram of the main body of the smart bracelet

Power-on

Long press the side button for 3 seconds or plug the smart bracelet into the base to charge to power on.

Downloading and binding of smart bracelet APP

Download and install APP

Scan OR code with a mobile phone to download APP.
For the IOS system, select the APP store; and for the Android system, select google play to download and install SMART-TIME PRO.

Note: your mobile phone must support Android 5.1 or IDS 8.0 or above, and Bluetooth 4.0 or above.

Operation instructions

Bind smart bracelet with APP

Click ‘Add Demo* to bind the annul bracelet
Click on your dente In the device let scanned.
When the interlace appears in the APP. the welch wit also shows the corresponding interlace to conform the connection laser. please click the watch to confirm.
The IOS system will shore a Sluetooth pang request and you can ask on Slut:1mM ‘Paireig^ to confirm. Connect it directly to Andrea’s system.
SeCtessluly bound.
For Apple mobile phone after binding removal, you need to click on the symbol on the right in Setting- Bluetooth and choose to ignore the device. As shown below:

Introduction of smart bracelet functions

Power-on status
Click on the touch to switch the menu interfaces of the main screen, as the interfaces shown in the following:

Introduction of main interface functions

After the smart bracelet and APP are first paired. the time and date of the mobile phone will be synchronized.

Step counting, distance, and calorie

The step-counting interface shows steps. Wear the smart bracelet on the wrist, and the smart bracelet can automatically count steps, distance, and calories.

Sleep monitoring

Wearing the smart bracelet at night to automatically judge whether you are in the sleep state, to record deep sleep and light sleep respectively, and to summarize the total sleep time to help you monitor your sleep quality. The sensor can measure your sleep quality according to the range and frequency of wrist movements when you sleep.

Body temperature detection

Wear the watch correctly, make the back of the watch close to the skin, open the body temperature function interface, and the body temperature result will be displayed in 5S. At the same time, you can also set the on and off time and frequency of automatic body temperature detection on the APP.

Note: The body temperature sensor on the back of the watch measures the temperature of the body surface. It reflects the real body temperature through an algorithm. The temperature of the body surface skin is greatly affected by the environment, so the data measured after the watch is worn for 30 minutes will be relatively more accurate.
Once again: The temperature function of this product is only for daily reference and not for medical purposes. Before making any medical decision, please consult a doctor for advice or use professional medical temperature detection equipment.

Menstrual period

After successfully connecting to the APP, set the detailed data of your menstrual cycle on the APP. The data will be synchronized to your watch. The watch will help you predict the start time of the next menstrual period or pregnancy based on your data. You quickly see the duration and changes of your menstrual period.

Heart rate measurement

Enter the heart rate test interface, the motor will vibrate once after the Start measurement and” Stop”, and the current measurement data will be displayed.
Correctly wear the smart bracelet on the wrist at 2cm of the inner side of the ulna joint to more accurately measure the heart rate data,as shown in the right figure.
Closely attach the heart rate sensor to the skin with good contact in the measurement of heart rate. The sensor light will expose if the smart bracelet is too loose, which will cause inaccurate measurement values. DO NOT directly look at the green light of the sensor in case your eyes feel uncomfortable.
Although the product dynamically detects the heart rate at real-time, the user has to keep sitting still when the device is used for measuring heart rate; otherwise, the time for measurement of heart rate will be delayed or no data can be measured. The user should not move until the smart bracelet measures the value and then the data of real-time dynamic heart rate can be checked.
It is necessary to measure again after a rest if there is a big difference in measured data. The average value obtained through five times of consecutive measurements is more accurate.
The product dynamically measures the heart rate at real time, so the heart rate is varied in different conditions, such as speaking, dining and drinking. It should be subject to the actual case.
Be sure that there is no dirt at the bottom of the heart rate sensor during measurement. Skin color, hair density, tattoo and scar may affect the accuracy of the measured results, in which cases it is necessary to re-measure the heart rate.

Exercise

There are 6 kinds of sports in the sports interface, including walking, running, cycling, rope skipping, badminton, basketball and football.

Messages

You can view the content pushed by the message in the information interface. At most three messages can be saved. After three messages are saved, the message: displayed before will be replaced by new messages one by one.

Camera

After connecting with the mobile phone, the smart bracelet can be used as a remote controller for the mobile phone camera. Open” Photo control’ in APP to “Shake” the smart bracelet and click on the icon to take a photo.

Find mobile phone

When the watch is connected to the APP, the phone will make a sound after tapping, if you want to stop, tap pause.

More

Click the” More” icon to enter the function interface.

Brightness regulation
Click the” More” icon to enter the function interface.
Restore factory settings
Click on “Confirm’ to clear all data in the smart bracelet, and to restore factory settings.
Power-off
Click on “Confirm’ to turn off the smart bracelet and the smart bracelet is in a sleep state.

Frequently Asked Questions (FAQs)

1. Why does the smart bracelet automatically disconnect Bluetooth when the Android screen goes out?

Lock background APP. When the SMART TIME PRO process is cleared, the smart bracelet will be disconnected from the mobile phone.
Set APP self-startup
Unrestricted background operation. The Android mobile phone installed with APP intelligently restricts the background operation by default, and App should be set manually without any restriction.

2. Why cannot the smart bracelet receive message push?

Please confirm that you have turned on the switch for message push at the mobile phone client.
Please confirm that messages can be displayed normally in the mobile phone notification bar. The message push on the smart bracelet is completed by reading the message from the mobile phone notification bar. The smart bracelet will not receive the message push if there is no message in the mobile phone
notification bar. (You need to find notification settings in the mobile phone settings, and turn on the notification switch of WeChat, QQ, call, SMS and mobile phone client).
Turn on the mobile phone — Settings. Enter “Notification use right” on the top search box, re-open SMART TIME PRO.

3. Why can’t take a hot bath with the smart bracelet?
Answer: the bath water has a relatively high temperature, and generates a lot of vapor which is in the gas phase with small molecular radius and can easily infiltrate into the smart bracelet from the shell gap. When the temperature drops down, the vapor will condensate into liquid-phase droplets which will easily cause the short circuit inside the smart bracelet and damage the circuit board and then damage the smart bracelet.
Note: for more FAQs, please refer to SMART TIME PRO APP feedback.
Warning:
Please consult your doctor before you take a new sport. The smart bracelet should not be used for any medical purpose though it may dynamically monitor the heart rate at real time.

Packing list

Main body of smart bracelet 1
Wrist band 1
Charging base 1
User manual 1
Packing box 1

https://www.havit.hk/?utm_source=social&utm_campaign=EWM

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation . Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure statement. The device can be used in portable exposure condition without restriction.