heyup C015FGE Mini Projector User Manual

: June 6, 2024
: heyup

User Manual
Heyup Boxe Projector

User Notice

Thank you for choosing Hey up. For your own safety and security, please read this manual carefully before using the device. Hey is not liable for, any physical injury, damage, or loss of data that may happen through actions not illustrated user manual. Illustrations of the product, accessories and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product advancements.

Product Overview Exterior

Caution:

The orange indicator shows the battery’s status. While charging, it is on. When charging is completed, the light is off. If an error should occur, the light will blink.
Do not place any objects within 20 cm of the air vents.
For mounting, please use specified screws and a suitable bracket.

Connection Ports

(Di Power Button (Short press to turn on) O Reset © USB Type-C Input Port 0 USB Input Port O NOM! Input Port © Headphone Jack Caution:

It is recommended to use the adapter that comes with this product (adapter input: 20V-3.25A).
This product can be used with a mobile power supply (input: 20V-3.25A ).
In order to avoid accidentally turning off the device by touching the power button of the remote control, long-press the power button on the projector to enter the safe shutdown state. In this state, the projector can only be switched on through the power button on the machine.
If not in use for a long time, the projector should be charged within every 3 months in order to keep the battery healthy. If the battery should have no power for more than 3-6 months, it could damage the battery and become a safety hazard. In such a situation, for your own safety, do not attempt to charge the battery and please contact our after-sales service.

Remote Control

Power: When the projector is off, short press to turn it on. When the projector is on, short press to open the power menu. Long press to turn it off.
Voice: Long press the voice control button and talk closely into the remote controller. The voice control feature will be added in a future update.
Launch Board: Access the launch board interface.
Navigation Pad: Move up, down, left, or right, then press the middle button to confirm.
Home: Return to the home screen.
Return: Return to the previous screen.
Menu: Short press to access settings. Long press to enter the launch board.
Volume: +Increases the volume. – Decreases the volume.
5+7 Pairing the Remote Control: Hold the remote control within 20cm of the projector, then simultaneously press the Menu and Home buttons to pair.

Caution:

Pay attention to the positive and negative poles when installing the batteries In the remote control.
Dispose of or recycle the batteries in accordance with the local laws and regulations of your country or region.
It is recommended that the distance between the remote control and the projector is no more than 5 meters.
The illustration of the remote control is for reference purposes only. The actual products and functions may vary due to the regions they are used in.

Quickstart Guide

Focus

Rotate the Focus Wheel to adjust the screen focus (minimum effective focusing distance: 1.2m).

Keystone Correction

Select Keystone Correction in the shortcut menu bar at the top of the homepage, and use the up and down buttons to select Quick Adjustment, Fine Tuning, or Reset, then press the OK button to enter the correction mode.

Network & Internet

Select Settings in the shortcut menu bar at the bottom of the homepage > (Network Settings), select the name of the wireless network to be connected, enter the network password, and wait for the connection to be completed.

Screen Casting

Select Cast Projection in the shortcut menu bar at the bottom of the homepage. Select the corresponding screencast method according to your mobile device to enter the next operation guide.

Bluetooth Speaker Mode

Select Bluetooth Speaker in the shortcut menu bar at the bottom of the homepage or press the power button on the remote control to select the Bluetooth speaker mode. Turn on Bluetooth on the mobile phone and search for the name of the projector, choose the corresponding device name to start pairing.
During playback, you can choose to turn off the screen. Click Screen off to enjoy the music only and press any key to exit.

Select Settings in the shortcut menu bar at the bottom of the homepage to enter the (Common Menu] page. All frequently used functions and software upgrade notifications will be displayed on this page.

Troubleshooting

Fault	Solution
No projected image	Restart the projector. If the problem remains, try

stabbing the reset hole to reset the projector.
System crashes| Restart the projector. If the problem remains, try stabbing the reset hole to reset the projector.
Screen display error| Restart the projector. If the problem remains, try stabbing the reset hole to reset the projector.
The remote control is missing or not paired and the projector cannot be turned on remotely| Turn off the projector and disconnect from the power. Wait for five minutes, then plug in the power cord and turn on the projector. After the projector has been restarted, pair the remote
If the projector overheats, it will automatically turn off| Please remove any obstacles from the air inlet and outlet vents so as to ensure a smooth airflow through the projector. Follow the instructions above to restart the projector.
Other internal system errors| Please contact a qualified technician to service the device, or return the projector to the after-sales department.

Heyup Warranty Policy

This warranty policy applies to the Heyup Boxe, and its accessories which include, adapter and remote controller. During the warranty period, if functional failure should occur through product default, or if you have any questions about your warranty, please contact us at support®heyup.com.

Heyup Warranty Duration: 12 months

Warranty restrictions

The device has exceeded the standard warranty duration.
The device has liquid damage or any moisture/corrosion damage.
Failed to use and maintain the device in accordance with the instructions in the user manual and lead to damage or malfunction, such as using the device under extreme temperatures, use of non-Heyup accessories, etc.
If any damage occurs in/on the outer surface of the device, including but not limited to crack, scratches on the external surface.
Any unauthorized repair or disassembling is attempted on the device.
The warranty is void if the device is rooted by the user and it cannot be restored by a system update. The warranty does not cover natural wear and tear, usage under extreme conditions, damage due to improper care, and/or
damage caused by acts of God such as floods, fire, or earthquakes.
If there is any conflict between this service policy and national laws and regulations, all national laws and regulations shall prevail.
If there is no warranty card or valid proof of purchase, an exception can be granted if the customer can prove that the device is within the warranty period.

Customer Support

If you have any questions or need to contact us for assistance, please contact our Customer Support Team. Email: support@heyupnow.com

Regulatory Compliance

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.

Hereby, [Formovie (Chongqing) Innovative Technology Co., Ltd.] declares that the radio equipment type [Mini Projector / C015FGE] is in compliance with Directive 2014/53/EU and Radio Equipment Regulations 2017. The full text of the declaration of conformity is available at the following internet address: http://www.formov-ie.com/global/service/support/declaration.html
This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range. BT
maximum transmitter power : 100mW at 2.4GHz – 2.4835GHz
Wi-Fi 2.4G maximum transmitter power : 100mW at 2.4GHz-2.4835GHz
Wi-Fi 50 maximum transmitter power : 200mW at 5.15GHz-5.25GHz , 100mW at 5.25GHz-5.35GHz 8 5.47GHz-5.725GHz
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class 13 digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Important: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Information: The radiated output power of this device meets the limits of FCC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20cm (8 inches) between the equipment and a person’s body.

Caution:

Risk of explosion if the battery is replaced by an incorrect type.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.