GOLDWORLD XKZBT-01 Bluetooth Beanie Hat Instructions

GOLDWORLD XKZBT-01 Bluetooth Beanie Hat

BUTTONS

Important Notes:

1. The two speakers are adjustable and removable, please adjust them as per your head size.
2. The beanie is washable, please pull out the module and speakers before washing.
3. The hole inside the beanie is designed to pull out the module and speakers for washing, it’s not a broken hole.
4. Please charge it via the USB cable for 2.5 hours first before using it.

How to play music:

1. To turn on the headphone, please press and hold the middle button until the indicator lights up, then the indicator flashes red and blue alternatively to start pairing.
2. Turn to the “SETTINGS” on your cell phone and then turn on the “BLUETOOTH”,the headphone will start searching Bluetooth device named “BT-01″(It usually takes a few seconds to search based on your cell phone signal,if failed, please try it again by turning off the “BLUETOOTH” and turning it on again ). Please be aware that it can connect Bluetooth in one device at one time, please make sure disconnect the previous Bluetooth device before connecting a new device.
3. Press and hold the “-” and “+” button to volume down and volume up respectively, please be noted that, if the volume is not loud enough to you(as different customer has different volume requirement),please volume up your cell phone as well.
4. Press quickly the “-” and “+” button to previous and next songs.

How to decline/accept calling:

1. When a calling comes, press quickly the middle button to accept.
2. When a calling comes,press and hold the middle button for 3 seconds to decline(no more than 3s, otherwise headphones will be turned off).
3. When on the line,press and hold the middle button for 3 seconds to switch to mobile device(no more than 3s,otherwise headphone will be turned off),press and hold the middle button for 3 seconds again to turn back to headphone.

Specification:

• Frequency: 2.402GHz-2.480GHz
• Transmission distance: 36 feet(11M)
• Li-ion Battery: 3.7V/ 250mA
• Charging time: 2-2.5 HRS
• Standby time :2000 Hrs or so
• Continuous working time: about 20-24 Hrs
• Bluetooth name: BT-01

Package includes:

• 1 x Bluetooth Beanie Hat
• 1 x Charging cable
• 1 x User Manual

FCC Warning

FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>