acaia Titan Brew Stand User Manual
- June 6, 2024
- acaia
Table of Contents
acaia Titan Brew Stand User Manual
Get Started
TITAN BREW STAND
Congratulations on your purchase of the Acaia Titan brew stand. This quick
start guide will walk you through the basics of how to set up and use your
Titan.
Made of durable aluminum alloy material, the Titan is built to the highest
standards of quality. The streamlined design makes the Titan easy to
disassemble, store, and clean. Form and functionality combine to offer you an
entirely new experience of using brew stands. The Titan can be used in
combination with Acaia scales to precisely measure the ratio between coffee
and brew. Its durable design also allows it to withstand the downward force
when extracting an AeroPress.
Assembly Guide
-
BEGIN ASSEMBLY
Turn the Titan upside down and use the four screws to secure the supports to the base.
-
MOUNT THE BASE
Fasten the filter supports to the base by using a coin to tighten the screws.
-
ATTACH ANTI-SLIP PADS
Remove the adhesive from the anti-slip pads. Press to attach the pads to the screw holes and corners.
-
ASSEMBLY COMPLETE
Turn the stand over. Ensure that the base is firmly attached.
