acaia Atlas QSG 0324 brew stand User Manual
- June 5, 2024
- acaia Atlas
Table of Contents
Atlas QSG 0324 brew stand
User Manual
ATLAS BREW STAND
Congratulations on your purchase of the Acaia Atlas brew stand. This quick
start guide will walk you through the basics of setting up and using your
Atlas.
Made of durable aluminum alloy material, the Atlas is built to the highest
standards of quality. The streamlined design makes the Atlas easy to
disassemble, store, and clean. Form and functionality combine to offer you an
entirely new experience of using brew stands.
Designed to contribute to consistent brews, the Atlas can be used to measure
coffee to water ratio with an Acaia Pearl, coffee to beverage ratio with an
Acaia Lunar, and real-time extraction ratio with a dual scale setup. The
durable design also allows the Atlas to withstand the downward force when
brewing an AeroPress.
ASSEMBLY GUIDE
-
BEGIN ASSEMBLY
Turn the Atlas upside down and use the four screws to secure the supports to the base. -
MOUNT THE BASE
Fasten the filter supports to the base by using a coin to tighten the screws. -
ATTACH ANTI-SLIP PADS
Remove the adhesive from the anti-slip pads. Press to attach the pads to the screw holes. -
ASSEMBLY COMPLETE
Turn the stand over. Ensure that the base is firmly attached.
To learn more about the Atlas. scan the OR code and get started at again.co /apps-atlas
https://acaia.co/pages/apps-atlas
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>