Dongguan Togran Electronics Technology TM240M Mouse User Manual
- June 6, 2024
- Dongguan Togran Electronics Technology
Table of Contents
USER MANUAL
Model NAME: TM240 M
MODEL NO. :
VERSION: 0.1
DATE: 2021.09.01
Version.
#| Revised Date| PIC| Remark
---|---|---|---
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
Electrical Specification
-
Operating Voltage
Mouse supply voltage: 3.7V (Li-battery)
Dongle supply voltage: 5V (USB Port) -
Current Consumption
Current use :< 20mA
Dongle< 35mA -
Sleep Mode
3.1 Electrical Current: ＜1mA;
3.2 Wake Up: Move & press the button -
Mouse Pointer Performance
4.1 Resolution：800/1200/1600/2000/2400 DPI
4.2 Speed： 25inches/sec （Max）
4.3 Acceleration：8G -
LED Indicating Functions
When the battery power is low (battery voltage reduce to <3.3V) the LED will glisten at the frequency of 1Hz -
Wireless specifications
Mouse: 2.402-2.480GHz frequency coverage.
GFSK RF transceiver
Button Functions
- Left Button: Mouse left button standard function
- Right Button: Mouse right button standard function
- Middle Button: Mouse middle button standard function
- Wheel: Mouse scroll wheel standard function
- Back Button: Mouse back button standard function
- Forward Button: Mouse forward button standard function
Operation Process
Step 1
Open the power key on
Step 2
Place the mouse on a desk or other plane surface. The surface material isn’t
metal is better for wireless distance.
Step 3
Insert Dongle in a USB port of PC. The Transceiver is paired with the mouse.
Step 4
Use the mouse freely.
Caution
Please use the Mouse in the human house only and keep away water.
Don’t fixate the light at the mouse bottom.
Children using the mouse with guardians together is necessary.
Keep dry. Humidity, liquids, contain minerals that will corrode electronic circuits.
Don’t use or store in dusty, dirty areas.
Don’t store in hot areas. High temperatures can shorten the life of electronic devices and warp or melt certain plastics.
Don’t store in very cold areas. Moisture can form inside the case, which may damage electronic circuit boards.
Don’t attempt to open the case. Non-expert handling of the device may damage the system.
Avoid dropping and strong impact.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user’s authority to operate the equipment.