Tomax RS2829 Wood-Accented Dual-Driver Stereo Bluetooth Speaker User Manual
- June 6, 2024
- Tomax
Table of Contents
Tomax RS2829 Wood-Accented Dual-Driver Stereo Bluetooth Speaker User
Manual
Product Instructions
-
ON/OFF : Press and hold the on/off button for 3 seconds to turn the product on or off. TWS: See more Instructions on next page.
-
How to connect to your device: Turn on Bluetooth on your device and connect to RS2829 (1 Om range max). Light flashing indicates: the speaker is searching for a Bluetooth device. Light staying on indicates: the Bluetooth device has been paired.
-
Play/ Pause: Press the @ button once to stop/resume playing music on the speaker. (The device will automatically turn off after 5 minutes of idle).
Phone Call : Short press button to answer/end a call; Double press to recall; Long press to reject the call.
-
O SV USB Charging Port Takes approximately 1.5-2 hours to be fully charged.
Red light flashing indicates the device is charging.
Red light completely on indicates the device has been fully charged.
(You may connect the USB charging lead to any SV USB charger to charge the product, such as a smartphone charger or a computer USB port). -
AUX-IN: This product could play music by useing aux-in cable link to other device.
-
Vol+/ Next : Short press button to play next song; Long press to increase volume.
-
Vol-/ Last: Short press button to play last song; Long press to reduce volume. TF Card: This product could play music file by insert Trans-flash Card.
TWS Pairing Instructions
This product has TWS technology allowing users to enjoy even better stereo
quality sounds with two speakers.
The instructions below explain how to pair two devices:
- Turn on both speakers by pressing the power button and make sure both speakers are not paired with other Bluetooth devices.
- Quickly press the ON/OFF button two times on one or both speakers. The speakers should get paired within 15 seconds and project a “beep” sound.
- If the pairing is not successful, turn off both devices and repeat steps 1 and 2. After pairing is successful, the main speaker will have a flashing light and the other device’s light will stay on.
- To unpair the speakers, disconnect from your Bluetooth device or press the ON/OFF button two times. (Both speakers will stay connected and automatically paired if they are turned on and have paired before)
- Pressing the Pause button to stop and play music on one speaker will control both speakers.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.