PROMATE NOVA Bluetooth Headset User Guide
- June 6, 2024
- PROMATE
Table of Contents
User Guide
Nova
Bluetooth headset
Introduction
Equipped with high-definition 40mm drivers, Nova wireless headphones deliver brilliant sound quality punctuated with superior bass, so every track on your playlist pops. The ergonomic earpads let you enjoy up to 10 hours of music streaming with 2 hours of recharging time, and the convenient AUX support lets your tunes go on even when the battery goes off. Stay tuned in to the music with Nova.
PackagingContents
- Nova
- Charging Cable
- Audio Cable
- User guide
Specifications
1. Bluetooth Version: v5.1 | 9. Standby Time: Up to 20 Hours |
---|---|
2. Bluetooth Profile: HSP, HFP, A2DP, AVRCP | 10. Battery Capacity: 300mAh |
3. Bluetooth Chipset: JL 6955 | 11. Input: DC 5V,0.5A |
4. Bluetooth Frequency Range: 2402MHz‐2480Mhz | 12. Battery Type: Li‐Polymer |
5. Driver Diameter: 40mm | 13. Operating distance: 10m |
6. Impedance:32Ω | 14. FM Frequency Range: 87.5‐108MHz |
7. ChargingTime:2‐3Hours | 15. Max TF Card Capacity: 32GB |
8. PlayingTime:8‐10 Hours
Features
- Brilliant Sound Quality: Nova wireless headphones deliver brilliant sound quality punctuated with superior bass, so every track on your playlist pops
- 10 Hour PlayTime: The ergonomic earpads let you enjoy up to 10 hours of music streaming with 2 hours of recharging time
- AUX Mode: The convenient AUX support lets your tunes go on even when the battery goes off
- Clear Calls: Enjoy the convenience of crystal clear handsfree calling with the integrated microphone
- Perfect Fit: Adjustable slider headband with ergonomic earpads make extended listening even more comfortable
- FM Support: Enjoy access to your favorite FM radio stations streamed directly into the headphones
Compatibility
Nova can be paired to all Bluetooth‐enabled devices.
Precautions
Please read all safety instructions and warnings thoroughly before using this product. Improper use of this product may result in damage to this or attached products.
- Do not disassemble the product or attempt to fix it.
- Do not attempt to replace any part of this product or battery inside.
- Do not crush, puncture, dispose of in fire, short the contacts or expose the product to water or other liquids.
- Do not store or use the product in a high‐temperature environment, including intense sunlight or heat.
- Avoid drops, bumps, abrasions, and impacts.
- If there is any reason to believe that there is damage to the product, discontinue use immediately.
- If you find that the product is too hot, is emitting an odor, or is deformed, punctured, or exhibits any suspicious or abnormal behavior, discontinue use immediately and contact our customer service.
Appearance & Interface Description
- TF Card Slot
- Volume‐ Button
- Multi‐Function Buton
- Volume+ Button
- Power Button
- Charging Port
- AUX Port
Operation Instructions
1. Power On/Off:
- Press and hold the power button for 2 seconds to turn on/off the headset
2. Headphone Pairing:
- Press and hold the power button until the blue and red LED lights to begin flashing alternately.
- Search for “Nova” via your smartphone or Bluetooth device and pair with the headset.
3. Music Controls:
- Short press the Volume+/Volume‐ buttons to traverse through the tracks.
- Long press the Volume+/Volume‐ buttons to control playback volume.
- When reaching the max volume, an alarm sound will be heard
4. Call Function:
- Short press the Power button to pick up a call.
- Long press the Power button for 2 seconds to reject an incoming call.
- Double press the Phone button to redial the last call number.
5. TF Card Playback:
- Insert the TF card into the TF card slot on the headset.
- The first track on the TF card starts playing automatically.
- Short press the Volume+/Volume‐ buttons to traverse through the tracks.
- Long press the Volume+/Volume‐ buttons to control playback volume.
6. FM Radio Function:
- Long press the multi‐function button to change to FM mode.
- Press the Multi‐Function button again to automatically search and store FM radio stations.
- Short press the Volume+/Volume‐ buttons to traverse through the stored FM stations.
- Long press the Volume+/Volume‐ buttons to control playback volume.
7. Charging Nova:
- Connect the charging cable to the charging port to begin charging.
- The LED indicator turns red when charging and turns off when fully charged.
- Do not use the headphones while undercharging
8. Using the wired Mode
plug in the 3.5mm cable to Aux‐in Port and another end to your device to use
as wired headphones. Note: the onboard music controls, Bluetooth,FM, and TF
card slot don’t work while using the headset in Aux mode
Remarks:
- If you want to change the playing mode. Press and hold the Multi‐function button for 2 seconds,it will return to TF/FM/Wireless mode automatically.
- When reaching the max volume, an alarm sound will be heard.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.