AEG OSK6I82EF Integrated Refrigerator User Manual
- May 15, 2024
- AEG
Table of Contents
AEG OSK6I82EF Integrated Refrigerator User Manual
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.aeg.com/support
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data
available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Children and vulnerable people safety
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children aged from 3 to 8 years and persons with very extensive and complex disabilities are allowed to load and unload the appliance provided that they have been properly instructed. Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
- Children should be supervised to ensure that they do not play with the appliance.
- Children shall not carry out cleaning and user maintenance of the appliance without supervision.
- Keep all packaging away from children and dispose of it appropriately.
General Safety
- This appliance is for storing food and baverages only.
- This appliance is designed for single household domestic use in an indoor environment.
- This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
- To avoid contamination of food respect the following instructions:
- do not open the door for long periods;
- clean regularly surfaces that can come in contact with food and accessible drainage systems;
- store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food
- WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- WARNING: Do not damage the refrigerant circuit.
- WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- Do not use water spray and steam to clean the appliance.
- Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
- When the appliance is empty for long period, switch it off, defrost, clean, dry and leave the door open to prevent mould from developing within the appliance.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard
SAFETY INSTRUCTIONS
Installation
WARNING!
Only a qualified person must install this appliance.
- Remove all the packaging.
- Do not install or use a damaged appliance.
- Do not use the appliance before installing it in the built-in structure due to safety manner.
- Follow the installation instructions supplied with the appliance
- Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
- Make sure the air can circulate around the appliance.
- At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
- Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.
- Do not install the appliance close to radiators or cookers, ovens, or hobs, unless otherwise specified in the installation instructions.
- Do not expose the appliance to the rain.
- Do not install the appliance where there is direct sunlight.
- Do not install this appliance in areas that are too humid or too cold.
- When you move the appliance, lift it by the front edge to avoid scratching the floor.
Electrical connection
WARNING!
Risk of fire and electric shock.
WARNING!
When positioning the appliance, ensure the supply cord is not trapped or
damaged.
WARNING!
Do not use multi-plug adapters and extension cables
- The appliance must be earthed.
- Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
- Always use a correctly installed shockproof socket.
- Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service Centre or an electrician to change the electrical components.
- The mains cable must stay below the level of the mains plug.
- Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
- Do not pull the mains cable to disconnect the appliance. Always pull the mains plug
Use
WARNING!
Risk of injury, burns, electric shock or fire.
The appliance contains flammable gas, isobutane (R600a), a natural gas with a high level of environmental compatibility. Be careful not to cause damage to the refrigerant circuit containing isobutane
- Do not change the specification of this appliance.
- Any use of the built-in product as freestanding is strictly prohibited.
- Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer.
- If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
- Do not let hot items to touch the plastic parts of the appliance.
- Do not store flammable gas and liquid in the appliance.
- Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
- Do not touch the compressor or the condenser. They are hot.
- Do not allow food to come in contact with the inner walls of the appliance compartments
Internal lighting
WARNING!
Risk of electric shock
- This product contains one or more light sources of energy efficiency class G.
- Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.
Care and cleaning
WARNING!
Risk of injury or damage to the appliance.
- Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
- This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.
- Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.
Service
- To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
- Please note that self-repair or nonprofessional repair can have safety consequences and might void the guarantee.
- The following spare parts will be available for 7 years after the model has been discontinued: thermostats, temperature sensors, printed circuit boards, light sources, door handles, door hinges, trays and baskets. Please note that some of these spare parts are only available to professional repairers, and that not all spare parts are relevant for all models.
- Door gaskets will be available for 10 years after the model has been discontinued.
Disposal
WARNING!
Risk of injury or suffocation.
- Disconnect the appliance from the mains supply.
- Cut off the mains cable and discard it.
- Remove the door to prevent children and pets to be closed inside of the appliance.
- The refrigerant circuit and the insulation materials of this appliance are ozonefriendly.
- The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
- Do not cause damage to the part of the cooling unit that is near the heat exchanger.
INSTALLATION
WARNING!
Refer to Safety chapters.
WARNING!
Refer to installation instruction document to install your appliance.
WARNING!
Fix the appliance in accordance with installation instruction document to
avoid a risk of instability of the appliance.
Dimensions
Overall dimensions ¹
H1| mm| 819
W1| mm| 596
D1| mm| 547
the height, width and depth of the appliance without the handle
Space required in use ²
H2| mm| 820
W2| mm| 596
D2| mm| 550
the height, width and depth of the appliance including the handle, plus the
space
necessary for free circulation of the cooling air
Overall space required in use ³
H2| mm| 820
W3| mm| 777
D3| mm| 1120
the height, width and depth of the appliance including the handle, plus the
space
necessary for free circulation of the cooling air, plus the space necessary to
allow door
opening to the minimum angle permitting removal of all internal equipment
Location
To ensure appliance’s best functionality, you should not install the appliance in a place with direct sunlight. Do not install the appliance close to radiators or cookers, ovens, or hobs, unless otherwise specified in the installation instructions.
Make sure that air can circulate freely around the back of the cabinet.
This appliance should be installed in a dry, well ventilated indoor position.
This appliance is intended to be used at ambient temperature ranging from 10°C to 43°C.
The correct operation of the appliance can only be guaranteed within the specified temperature range.
If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre.
It must be possible to disconnect the appliance from the mains power supply. The plug must therefore be easily accessible after installation.
Electrical connection
- Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.
- The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.
- The manufacturer declines all responsibility if the above safety precautions are not observed
Ventilation requirements
CAUTION!
Appliance must be installed according to installation instruction in order to
ensure required ventilation.
Door reversibility
Please refer to the separate document with instructions on installation and
door reversal.
CAUTION!
At every stage of reversing the door protect the floor from scratching with a
durable material.
CONTROL PANEL
Switching on
- Insert the plug into the wall socket.
- urn the temperature regulator clockwise to a medium setting.
Switching off
To turn off the appliance, turn the temperature regulator to the “O” position
Temperature regulation
The temperature is regulated automatically. However, you can set a temperature
inside the appliance yourself
Choose the setting keeping in mind that the temperature inside the appliance depends on:
- room temperature,
- frequency of opening the door,
- quantity of food stored,
- appliance location.
A medium setting is generally the most suitable one.
To operate the appliance:
- Turn the temperature regulator clockwise to obtain a lower temperature inside the appliance.
- Turn the temperature regulator counterclockwise to obtain a higher temperature inside the appliance.
DAILY USE
CAUTION!
This refrigerating appliance is not suitable for freezing foodstuffs.
Positioning the door shelves
To permit storage of food packages of various sizes, the door shelves can be
placed at different heights.
- Gradually pull the shelf up until it comes free.
- Reposition as required
This model is equipped with a variable storage box which can be moved sideways.
Movable shelves
The walls of the refrigerator are equipped with a series of runners so that
the shelves can be positioned as desired.
Do not move the glass shelf above the vegetable drawer to ensure correct air circulation
Vegetable drawer
There is a special drawer in the bottom part of the appliance suitable for
storage of fruits and vegetables.
HINTS AND TIPS
Hints for energy saving
- Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance and shelves evenly distributed. Position of the door bins does not affect energy consumption.
- Do not open the door frequently or leave it open longer than necessary.
- Do not set too high temperature to save energy unless it is required by the characteristics of the food.
- If the ambient temperature is high and the temperature control is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice formation on the evaporator. In this case, set the temperature control toward higher temperature to allow automatic defrosting and to save energy this way.
- Ensure a good ventilation. Do not cover the ventilation grilles or holes.
Hints for fresh food refrigeration
- The medium temperature setting ensures good preservation of fresh food. Higher temperature setting inside the appliance may lead to shorter shelf life of food.
- Cover the food with packaging to preserve its freshness and aroma.
- Always use closed containers for liquids and for food, to avoid flavours or odours in the compartment.
- To avoid the cross-contamination between cooked and raw food, cover the cooked food and separate it from the raw one.
- It is recommended to defrost the food inside the fridge.
- Do not insert hot food inside the appliance. Make sure it has cooled down at room temperature before inserting it.
- To prevent food waste the new stock of food should always be placed behind the old one.
Hints for food refrigeration
- Fresh food compartment is the one marked (on the rating plate) with .
- Meat (all types): wrap in a suitablepackaging and place it on the glass shelf above the vegetable drawer. Store meat for at most 1-2 days.
- Fruit and vegetables: clean thoroughly (eliminate the soil) and place in a special drawer (vegetable drawer).
- It is advisable not to keep the exotic fruits like bananas, mangos, papayas etc. in the refrigerator.
- Vegetables like tomatoes, potatoes, onions, and garlic should not be kept in the refrigerator.
- Butter and cheese: place in an airtight container or wrap in an aluminium foil or a polythene bag to exclude as much air as possible.
- Bottles: close them with a cap and place them on the door bottle shelf, or (if available) on the bottle rack.
- Always refer to the expiry date of the products to know how long to keep them.
CARE AND CLEANING
WARNING!
Refer to Safety chapters.
Cleaning the interior
Before using the appliance for the first time, the interior and all internal
accessories should be washed with lukewarm water and some neutral soap to
remove the typical smell of a brand-new product, then dried thoroughly
CAUTION!
Do not use detergents, abrasive powders, chlorine or oil-based cleaners as
they will damage the finish.
CAUTION!
The accessories and parts of the appliance are not suitable for washing in a
dishwasher.
Periodic cleaning
The equipment has to be cleaned regularly:
- Clean the inside and accessories with lukewarm water and some neutral soap.
- Regularly check the door seals and wipe them clean to ensure they are clean and free from debris.
- Rinse and dry thoroughly.
Defrosting of the refrigerator
Frost is automatically eliminated from the evaporator of the refrigerator
compartment during normal use. The defrost water drains out through a trough
into a special container at the back of the appliance, over the motor
compressor, where it evaporates.
It is important to periodically clean the defrost water drain hole situated under the salad drawers to prevent the water overflowing and dripping onto the food inside.
For this purpose use the tube cleaner provided with the appliance.
Cleaning the air channels
-
Remove the plinth (A), then the ventilation grid (B).
-
Clean the ventilation grid.
-
Carefully pull the air deflector out (C), checking that there is no water left from the defrosting.
-
Clean the lower part of the appliance with a vacuum cleaner.
Period of non-operation
When the appliance is not in use for long period, take the following precautions:
- Disconnect the appliance from electricity supply.
- Remove all food.
- Clean the appliance and all accessories.
- Leave the door open to prevent unpleasant smells.
TROUBLESHOOTING
WARNING!
Refer to Safety chapters
What to do if.
Problem | Possible cause | Solution |
---|---|---|
The appliance does not operate. | The appliance is switched off. | Switch on the |
appliance
The mains plug is not connected to the mains socket correctly.| Connect the
mains plug to the mains socket correctly.
There is no voltage in the mains socket.| Connect a different electrical
apply‐ acne to the mains socket. Contact a qualified electrician.
The appliance is noisy.| The appliance is not supported properly| Check if the
appliance stands sat‐ bleb.
The compressor operates continual‐ lee.| Temperature is set incorrectly| Refer
to “Control panel” chapter.
Many food products were put in at the same time.| Wait a few hours and then
check the temperature again
The room temperature is too high.| Refer to “Installation” chapter.
Food products placed in the apply‐ acne were too warm| Allow food products to
cool to room temperature before storing.
The door is not closed correctly.| Refer to “Closing the door” section.
Door is misaligned or interferes with ventilation grill.| The appliance is not
levelled.| Refer to installation instructions.
Door does not open easily.| You attempted to re-open the door immediately
after closing| Wait a few seconds between closing and re-opening of the door.
The lamp does not work| The lamp is defective.| Refer to “Replacing the lamp”
sec‐ tin.
There is too much frost and ice| The door is not closed correctly.| Refer to
“Closing the door” section
The gasket is deformed or dirty.| Refer to “Closing the door” section
Food products are not wrapped properly.| Wrap the food products better.
Temperature is set incorrectly.| Refer to “Control panel” chapter.
Appliance is fully loaded and is set to the lowest temperature| Set a higher
temperature. Refer to “Control panel” chapter
Temperature set in the appliance is too low and the ambient tempera‐ true is
too high| Set a higher temperature. Refer to “Control panel” chapter.
Water flows on the rear plate of the refrigerator.| During the automatic
defrosting process, frost melts on the rear plate.| This is correct
There is too much condensed water on the rear wall of the refrigerator| Door
was opened too frequently.| Open the door only when necessary‐ ry.
Door was not closed completely.| Make sure the door is closed com‐ politely.
Stored food was not wrapped| Wrap food in suitable packaging be‐ fore storing
it in the appliance
Water flows inside the refrigerator| Food products prevent the water from
flowing into the water collector.| Make sure that food products do not touch
the rear plate.
The water outlet is clogged.| Clean the water outlet.
Water flows on the flood| The melting water outlet is not con‐ nested to the
evaporative tray below the appliance.| Attach the melting water outlet to the
evaporative tray
The temperature in the appliance is too low/too high| The temperature is not
set correctly.| Set a higher/lower temperature.
The door is not closed correctly.| Refer to “Closing the door” section
The food products’ temperature is too high.| Let the food products temperature
decrease to room temperature be‐ fore storage
Many food products are stored at the same time| Store less food products at
the same time
The door has been opened often.| Open the door only if necessary.
There is no cold air circulation in the appliance.| Make sure that there is
cold air coir‐ collation in the appliance. Refer to “Hints and tips” chapter.
If the advice does not lead to the desired result, call the nearest Authorized Service Centre.
Replacing the lamp
The appliance is equipped with a long-life LED interior light.
It is strongly recommended to use original spare parts only
Use LED bulbs (E14 base) only. The maximum power is shown on the lamp unit.
CAUTION!
Disconnect the plug from the mains socket.
-
Using a screwdriver, remove the screw from the lamp cover.
-
Detach the lamp cover in the direction of the arrows.
-
Replace the bulb with the one that has identical characteristics and is specifically designed for household appliances.
-
Reassemble the lamp cover.
-
Tighten the screw to the lamp cover.
-
Connect the plug to the mains socket.
-
Open the door. Make sure that the light switches on.
Closing the door
- Clean the door gaskets.
- If necessary, adjust the door. Refer to installation instructions.
- If necessary, replace the defective door gaskets. Contact the Authorised Service Centre
NOISES
TECHNICAL DATA
The technical information is situated in the rating plate on the internal side of the appliance and on the energy label.
The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu and the model name and product number that you find on the rating plate of the appliance.
See the link www.theenergylabel.eu for \ detailed information about the energy label.
INFORMATION FOR TEST INSTITUTES
Installation and preparation of the appliance for any Eco-design verification shall be compliant with EN 62552 (EU). Ventilation requirements, recess dimensions and minimum rear clearances shall be as stated in this User Manual in “Installation”. Please contact the manufacturer for any other further information, including loading plans.
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the packaging in relevant containers
to recycle it.Help protect the environment and human health by recycling waste
of electrical and electronic appliances. Do not dispose of appliances marked
with the symbol with the household waste. Return the product to your local
recycling facility or contact your municipal office.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>