Pepkoo CK60 Magnetic Wireless Charger User Manual
- June 6, 2024
- Pepkoo
Table of Contents
Magnetic Wireless Charger
User Manual
Specifications
Model: CK60
Input: 12V(compatible 9V/5V)
Output: 7.5W/10W/5W
Frequency: 110-205kHz
Charging Range: 4~6mm
Conversion: 75%~84%(max)
Compatible: iPhone X/8/8plus/Samsung S/Note Series
Protection: POD,OT,OV,OC,OVP,DPL,FOD
Adapter: QC3.0(12V) /Compatible with QC2.0(9V)/Normal 5V
Package Inclues
- Wireless Charger Pad x 1
- USB Charging Cable x 1
Attention:
Power Adapter is not included. We recommend QC3.0(12V) enabled power
adapter for fast charging.
Basic Operation
Charging Status
Indicators
|
Status
---|---
Indicators: Red/Blue(Green) LEDs| 1. Power On The Red and Blue (Green) LEDs
are on.
2. Stand By: The Red LED is on.
3. Charging: The Blue(Green) LED is on.
4. Error: The Red LED is flash.
5. Full: The Blue(Green) LED is off and the Red LED is on.
Adapters:
- For iPhone Users: Please use QC3.0(12V) adapter
- For Samsung Users: Please use QC3.0(12V) or QC 2.0(9V) adapter
- Compatible with normal 5V adapter (Not fast charging mode)
Charging Cable
Use USB-Micro cable contained in the package to connect the USB power adapter.
Notice
Please check carefully the wireless charging compatibility before charging a
mobile phone.
Non-standard power adapter or charging cable may impact the efficiency of
wireless charging.
Metal mobile phone cases may block wireless charging.
Charging progress will cause temperature raising on the surfaces of mobile
phones and wireless chargers. Please watch out.
Inappropriate use may cause damage or reduce product life. The manufacturer
has no responsibility in the case of misuse.
FAQ&Warnings
| Faults | Solutions |
|---|---|
| Indicators aren’t working | 1. Incorrect connection |
2. Loose connection of charging cable
3. Damage of the charging cable or adapter
4. Others
The devices cannot be charged by the wireless charger| 1. Can the devices
support wireless charging?
2. Place the devices on the wireless charger correctly.
3. Metal protective case.
4. Fault of the wireless charger.
Please contact the local distributor.
Proper Usage:
Please keep the wireless charger away from water and fire, high(>45℃) or
low(<-10℃) temperature environment.
Please do not use it as a toy.
Please do not dismantle or change the structure of the product.
Do not scratch the surface with sharp objects. Do not throw, shake or
dismantle the wireless charger.
Clean only with a soft dry cloth and keep away from chemical cleaning agents.
Warranty Term
Thank you for choosing Pepkoo Wireless Charger.
Warranty period: 1 year for a wireless charger, and 6 months for charging
cable.
Warranty range:
a. Product without Pepkoo label is out of warranty.
b. Original package and accessories are required.
c. Warranty service is only for quality problems except for the following
cases:
Accidents or negligence, such as collision during delivery, improper
electrical
Wiring and connections.
Attempted repairs or modifications by unauthorized engineers.
Equipment, components have exceeded the warranty period.
Natural disasters, such as earthquakes or fire.
Fail to provide warranty card and related sales receipts.
FCC statement:
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Radiation
Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>