singing machine SMC2035 Mic Stand Karaoke System Instruction Manual
- June 6, 2024
- Singing Machine
Table of Contents
SMC2035
INSTRUCTION MANUAL
The Singing Machine® is a registered trademark of The Singing Machine Co., Inc.
Warnings
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this product.
DRIPPING WARNING: This product shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the product.
VENTILATION WARNING: The normal ventilation of the product shall not be impeded for intended use.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The rating information is located at the bottom of the unit.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
Important Safety Information
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with
the Manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug.
A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. When the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/ apparatus combination to avoid injury from tip-over.
PORTABLE CART WARNING (symbol provided by RETAC)
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. Do not place objects filled with water, such as
a vase, on the apparatus.
16. The AC mains plug is used as the power disconnect device and it should
remain readily accessible and operable during intended use. In order to
completely disconnect the apparatus from power, the mains plug should be
completely removed from the AC outlet socket.
17. CAUTION: To reduce the risk of fire or explosion, do not expose batteries
to excessive heat such as sunshine, fire or other heat sources.
Included
Please make sure that the following items are included.
Main Unit Cradle with mic holders (Detachable)
Extendable Mic stand AC Adapter
Manual Wired Microphone
Assembly
A Cradle pole
B Cradle pole adjustment cap
C Height adjustment cap
D Extendable Mic Stand
1 Lift the rubber cover on the top of the Main unit. Insert the Mic stand
into the Main unit and tighten it.
2 Untighten cradle pole cap, pull up on the cradle pole. Retighten cap to
keep in place.
3 Insert then rotate to tighten the Cradle with Mic holders on the mic
stand.
4 Untighten height adjustment cap to adjust to a suitable height.
Retighten cap to hold in place
Location of Controls
TOP
REAR DISPLAY
- NAVIGATION/ENTER Control
- Rubber Cover
- MUSIC VOLUME Control
- PLAYBACK Button
- RECORD Button
- VOICE EFFECTS Control
- Bluetooth Button
- / (ON/STANDBY/ LIGHTS button)
- VOCALS OFF Button
- BACK Button
- MIC VOLUME Control
- FUNCTION Button
- Display
- Handles
- DC In Jack
- HDMI Jack
- Mic 1 Jack
- Mic 2 Jack
- Cradle
- Mic Holders
- Cradle pole adjustment cap
- Height adjustment cap
- Speaker
- Bluetooth indicator
- Mic 1 indicator
- Mic 2 indicator
Connections
Connecting to AC Power
Insert the AC power cord into a conveniently located AC outlet having 120V AC, 60Hz.
Notes:
-
Make all connections prior to plugging the AC adaptor into a power outlet.
-
The AC adaptor has a polarized plug that fits into the AC outlet only one way. If the plug does not fit properly, turn it over and try again. Do not force and do not file or cut the wide blade.
-
-
Connecting the Unit to a TV
- Rear of External TV
- HDMI Cable
To output the video, lyrics and audio to your TV, perform the following steps:
Plug the HDMI cable (not included) into the HDMI Jack on the back of the unit. Plug the other end of the HDMI cable into the HDMI input on your TV.
Notes:
- This unit can be used with or without a TV, but it is highly recommended to use a TV in order to utilize all the features.
- Also refer to the TV’s User Guide.
Connecting the Microphone(s)
Microphones:
Connect a microphone into Mic jack 1 (1) as well as Mic jack 2 (2)
(when desired).
Note: Do not drop or tap the Mic as damage to the Mic or speakers may occur. Do not twirl the microphone cord as it will cause damage to the encased wiring.
Lights Mode
When the unit is turned on, the Light mode 1 is automatically activated. The lights will light up and will synchronize with sound when you speak or sing into the microphone.
Press the / button for Light mode 2 which will display the light show but will not respond to the microphone.
Press the / button once again to turn off the Lights.
Cradle
- PULL
Connect to WiFi
1 Connect the unit as described previously; it should be connected to a TV. Press and hold the / ( ON/STANDBY/LIGHTS ) button to turn the unit on. The menu window will pop up.
2 Select SETTINGS OPEN using the NAV/ENTER button.
Search and select your home’s WiFi using the NAV/ENTER button. Input your
WiFi password to complete the login
Note: process.
- Rotate the NAV/ENTER button to navigate. Press the button to enter.
- This unit supports 2.4GHz WiFi only.
3 USE YOUR MOBILE DEVICE TO CONNECT TO WiFi
Select SINGCAST CASTING OPEN using the NAV/ENTER button. Use your
mobile device to scan the QR code. Search and select SML2035 on the WiFi
network. Input the password singingmaching to complete the login process.
If successful, the screen will show connected.
4 Another QR code will pop up, Use your mobile device to scan the QR code.
Search and select your home’s WiFi on your mobile device. Input your WiFi
password to complete the login process.
If unsuccessful, check your password and Wi-Fi frequency and re-connect again.
Notes:
- This unit supports 2.4GHz WiFi only.
- Make sure the mobile device and unit’s Wi-Fi network use the same.
5 If successful, the screen will show connected. You can download the Singing Machine Karaoke app at this page to purchase your favorite karaoke music. And use your mobile device to play the karaoke music on TV.
6 The unit automatically searches and pairs a previously paired mobile device and Wi-Fi network. You can also goto the menu select the **SETTING OPEN
Wi-Fi setting > DISCONNECT** to disconnect any paired devices or Wi-Fi network in order to pair another mobile device or Wi-Fi network.
Settings
1 Press the BACK button to go back to the previous screen. Select SETTINGS OPEN using the NAV/ENTER button.
2 Select WiFi setting to connect or disconnect from the Wifi network and check the WiFi signal level.
3 To adjust the brightness, sleep time, font size of screen, and HDMI, select Screen setting.
4 Select Software update to update the software of the unit.
5 Select Software info to check the software version of this unit.
6 Select Factory setting to delete all data stored in the unit.
Operation
Using a Bluetooth Device
1 Connect the unit as described previously. Press and hold the / (ON/STANDBY/LIGHTS) button to turn the unit on.
3 WAYS TO ENTER BLUETOOTH MODE
2 Repeatedly press the FUNCTION button to select the Bluetooth; “bt”
will appear in the display.
3 Press the button; “bt” will appear in the display.
4 Select BLUETOOTH OPEN in the menu using the NAV/ENTER button, select CONNECT in the Wi-Fi setting and connect as previously described; it should be connected to a TV.
5 Turn on your device’s Bluetooth option in settings to search for a
discoverable device with a Bluetooth signal. Select “ SINGING MACHINE ”
from the device results on the Bluetooth menu.
NOTE: Also refer to the user manual of your Bluetooth device for detailed
instructions.
6 “bt” and bluetooth indicator will light solid and a successful pairing sound will be heard.
NOTES:
-
If your Bluetooth prompts you for a passcode during the pairing process, please enter
“0000” to connect. -
On some Bluetooth devices, once pairing is completed, select your Bluetooth device as “Use as Audio Device” or similar.
-
If connection is lost after successful pairing, check to make sure the distance between speaker and Bluetooth-enabled device does not exceed 30 feet/10 meters.
7 The unit automatically searches and pairs a previously paired Bluetooth device (if previously paired). If no previously paired devices are present and you cannot find this unit on your bluetooth compatible device’s search list.
You can also press and hold the button to disconnect any paired devices in order to pair another device. Or select DISCONNECT in the Wi-Fi setting and connect as previously described; it should be connected to a TV. The ” bt & Pr” and bluetooth indicator will start flashing for 60 seconds. Pair another devices when flashing.
8 To control your Bluetooth device from this unit, press the button to start playback (music app must be open).
9 Adjust the volume to a comfortable level using the MUSIC VOLUME control on this unit as well as the volume on your Bluetooth device.
10 Connect the microphone and slide the ON/OFF switch on the microphone to the ON position
11 RECORD YOUR SINGING PERFORMANCE
During music playback, press the RECORD button to record your singing and
the music, “REC” will appear in display and light solid. Press the RECORD
button again to stop recording, the “REC” will turn off.
This unit is able to record for 5 minutes. It will also stop recording
automatically after 5 minutes and the “REC” will turn off.
NOTE: Please note that each time when the new recording is being
recorded, the existing recording will be deleted.
12 PLAYBACK YOUR SINGING PERFORMANCE
To playback your singing performance, you can press the PLAYBACK button.
“PB” will appear on the display and light solid. Press again to stop. Press
and hold the PLAYBACK button to delete the recorded track.
13 To sing without the lead singer on the recording, press the VOCALS
OFF button. To resume the lead singer, press again.
NOTE: Lead vocal removal might work better on some songs than others.
14 Slide the VOICE EFFECTS button to select the voice effects.
15 Slide the MIC VOLUME button as desired. Increasing this control will increase the volume of both microphones.
16 Press and hold the / button to turn off the unit.
Troubleshooting Guide
Should this unit exhibit a problem, check the following before seeking service:
No Power
- Power is not on; press the / (LIGHTS/ON/STANDBY) button to turn power on.
- Confirm that the AC adapter is connected securely to the rear of the unit.
- Connect the unit to a different outlet.
- The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply restart the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in another location.
No Sound - General
- Music Volume is set to minimum; raise volume.
- If using an external device, raise the volume.
No Sound - If connected to a TV
- Volume on the TV is muted or too low.
- Correct source (usually AV) was not selected on the TV’s menu.
No sound from the microphone
- Make sure the microphone is firmly connected to the MIC 1 or MIC 2 jack.
- Make sure the mic’s ON/OFF switch is set to the ON position.
- Make sure the MIC VOLUME control is not set too low.
- MUSIC VOLUME is set to minimum; raise volume.
The Bluetooth device cannot be paired or connected with the unit
- Ensure any other Bluetooth devices are turned off to avoid accidental pairing.
- You have not activated the Bluetooth function of your device; see page E9 or refer to the Bluetooth device user’s manual.
- The system is not in pairing mode; press and hold the / button to restart pairing. The Music is not available on the unit after successfully connecting the Bluetooth
- Ensure your Bluetooth device can support the A2DP Bluetooth profile.
- The volume on the external Bluetooth device is set too low or muted; raise as desired.
Failed to connect to the Wifi network
- The unit is not within the WiFi signal range.
- Check that your WiFi frequency is 2.4GHz.
- Check the mobile device and unit are use the same Wi-Fi network.
- Ensure you have entered the correct password.
Specifications
AUDIO
Output Power ………………35 Watts (RMS)
BLUETOOTH
Bluetooth Version ……………V5.0
Working Distance…………….. Up to 30 feet/10 meters measured in open space
CONNECTING JACKS
Microphone …………………. 6.3mm
Aux In………………………. 3.5mm Stereo Jack
GENERAL
Power ……………………. 100-240V, 50/60Hz
Output …………………… DC16.1V 3A Positive Center
Dimensions:
Main Unit only ……………….. 10.3 x 10.3 x 12.6 inches (26.2 x 26.2 x 32cm)
Main unit + Mic stand ………… Adjustable height max. 64.2 H inches/ 163cm
(optional)
Weight – Main Unit only ………. 4.6 Lbs (2.1 kgs)
Main unit + Mic stand ………… 5.4 Lbs (2.5 kgs)
Microphone ………… -74 dB 600 Ohms impedance with 6.3 mm Dynamic Microphone
Specifications are subject to change without notice.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc. in the United States and other countries.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such marks and logos by
The Singing Machine Company, Inc. is under license. Other trademarks and trade
names are those of their respective owners.
Visit Our Website:www.singingmachine.com
Copyright © 2021 All Rights Reserved.
The Singing Machine Company, Inc.
4060 E Jurupa Street, Unit B
Ontario, CA 91761-1413 USA
U.S. Representative
Company Name : The Singing Machine Company, Inc.
Address : 6301 NW 5th Way, Suite 2900, Fort Lauderdale, FL33309,
USA
Telephone : 954 -596-1000
Website : www.singingmachine.com
PRINTED IN CHINA
2035-2111-ESF01-US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>