BLUETTI EB200P Portable Power Station User Manual
- June 6, 2024
- Bluetti
Table of Contents
BLUETTI EB200P Portable Power Station
BRIEF INTRODUCTION
The EB200P features continuous output power at 2,200W from the pure sine wave
inverter and a built-in unique 30A NEMA TT-30 receptacle designed for the
RV,and 100W PD3.0 USB-C port, 900W MPPT controller are all integrated.
ABBREVIATION
SAFETY INSTRUCTION
IN THE BOX
FUNCTIONS
-
DC 12V/10A cigarette lighter port
Output port for devices with the corresponding plug such as vehicle-use vacuum, refrigerator. -
DC 5521 12V/10A output x 2pcs
Traditional ports for routers/cameras, old laptops etc. -
DC 12V/30A output
Special 30A output port can be adapted to appliances widely, perfect for RV. -
USB-A 18W output x 2pcs
Quick charge USB-A ports. -
USB-C 100W output
Can be used via USB-C to USB-C cable to charge most devices in the market such as Pixel Phone, Macbook Pro at 100W Max. -
USB-A 5V/3A output x 2pcs
Classic USB-A ports. -
DC input port
Can be connected to solar panels, or achieving car charging, lead-acid battery, extra T500 adapter by extra cables. -
AC input port
Charging via T500 adapter -
Wireless charging 15W x 2pcs
Place your phone(if wireless charging supported) on the top of the EB200P vertically, and turn on the DC in mainpage on screen. -
Touchable interaction LCD display
Can be pressed/tapped to control the unit by nails. -
Power button
Lone/Short press to turn ON/OFF the EB200P -
US AC output x 6 pcs (EU/UK AC output x 4pcs)
Standard AC receptacle: wildly used in 100-120V areas, generates the almost same AC power as a household wall outlet.
High-voltage area uses special sockets.
LET`S GET STARTED
- Startup: short press the power button, the indicator light is on, and the machine is in standby mode.
- Shutdown: press and hold the power button for more than 2 seconds, and the indicator light will be off and the machine shut off.
The LED indicator lamp status warning
BMS Over current or short circuit protection| Turn off after the indicator
light flashes
BMS Startup timeout| The indicator light flashes and not shut down
Normal startup| The indicator light on
Normal shutdown| The indicator light off
DC power switch and AC power switch are integrated in the interaction LCD screen(Figure 1),press“DC ON/OFF”button and “AC ON/OFF”button on the screen to turn on/off the DC /AC output.
TOUCHSCREEN
Interaction LCD screen(Information Vision) supports below functions:
Real time display of voltage, current, power, temperature and state of charge
and discharge.
- Support energy-saving, and enable Super ECO mode to save more than 30% of useless energy loss.
- Support users to view fault information, historical fault information, software version independently.
Warm tip:
When press the power button,it will enter the main interface of the LCD display screen:
a. PV/Car charging display
b. BMS Info
c. Date/Time
d. DC load Info
e. DC ON/OFF Switch
f. AC ON/OFF Switch
g. Adapter charging display
h. AC load Info
Click the settings button in the main interface (Figure 2) to enter the
setting interface as follows (Figure 3) :
Warm tip: Please enter the setting interface to set the date and time
according to the local time zone, and check the output voltage, frequency and
other parameters for the first time.
Voltage and Frequency Reference:
- EU output: 230V/50Hz
- UK output: 230V/50Hz
DC Input Source: Select the right method you choose to charge EB200P.
ECO Mode: While it`s on, the AC output ports will be automatically turned
off if the load on it is less than 50W over 4 hours.
Press “Next” icon to enter date setting as (Figure 3):
Backlight and Sleep time: set the proper value as your need for power saving.
Date and time: 2000-00-00 00 00 00, tap the number to set it right.
| Return to the main page, tap the “Data” icon to enter the Data page (Figure 4) |
|---|
- Tap the “Product Info” icon, you can view the product model, software version, BMS version etc;
- Tap the “BMS Maintenance” icon to view the status of battery, and it can also be accessed directly from the shortcut icon in the main page;
Tap the “Fault History” icon, all the fault information generated by the EB200P in daily use.
Tap Alarm Icon (MainPage) to view the current error information: the fault indicator will display orange if there is a fault occurs.
CHARGING
(1) From AC Wall outlet
Turn EB200P ON and connect the plug of adapter to the wall outlet, the other side to AC input port. Charging will automatically stop when it reaches 100% (4.6-5.1Hrs).
(2) From the solar panels
Connect the solar panels(in series or parallel) with Open Circuit Voltage
range 10V-145V.
Connect the solar panel to EB200P via solar charging cable. (Standard
Accessories 5 to Accessories 3)
Plug and play charging: EB200P will be activated when solar charging system
built up successfully.
Max input current of the solar charging: 15.2A ± 0.3.
(3) Car Charging
Press the power button and connect it to the cigarette lighter port through
the car charging cable.
Enter the setting interface as shown in (Figure2) through the display screen
to set DC input source to car mode; The product can be charged with 8.2A
maximum current. 
(4) Generator
Charging(gasoline, propane or diesel)
Connect the AC adapter input to the generator and the output port to the AC
charging port of the machine.
Press the power button, the product will be charged, the charging will
automati-cally stop when it reaches 100%.
(5) Lead-acid Battery Charging
Connect to the positive and negative poles of the battery through the Charging
Clamp (Accessories 9)
Note: pay attention to distinguish the positive and negative poles of the
battery, the red side indicates positive pole.
Enter the setting interface in (Figure 1) through the screen to set DC input
source to “car mode” to achieve 12V/24V car charging mode, with the maximum
current of 8.2A.
Note: DO NOT charge the battery through this accessory.
(6) Dual Charging
Set the DC input source to PV to achieve AC + PV Dual Charging
Set the DC input source to others to achieve AC + T500/Lead-Acid Battery
Charging.
DISCHARGING
1APPLICATION SCENARIO
EXAMPLES OF LOADS
ESTIMATION OF OPERATING TIME
TECHNICAL SPECIFICATIONS
GENERAL SPECS
OUTPUT SPECS
INPUT SPECS
TROUBLESHOOTING
FAQ (Frequently Asked Questions)
DECLARATION
FCC WARNING
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>