Shenzhen Welldy Technology OZ-E100MINI Outdoor Wireless Speaker User Manual

: June 6, 2024
: Shenzhen Welldy Technology

Table of Contents

SAFETY INSTRUCTIONS
PARTS AND FUNCTIONS
CHARGING
TECHNICAL PARAMETERS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Outdoor Wireless Speaker
User Manual
OZ-E100mini

SAFETY INSTRUCTIONS

Read all instructions
Only charge with devices rated and marked with 5V to avoid damage to the speaker. Do not open up the speaker, it voids the warranty and may damage the product.
Rechargeable batteries have a limited number of charge cycles. Battery life and a number of charge cycles vary by use and settings.
Never place the speaker close to high-temperature heat sources.
To keep the warranty valid, never try to repair the product yourself.

PARTS AND FUNCTIONS

Lanyard.
+: Volume up button: next song, increase the volume.
-: Volume down button: the previous song, decrease the volume.
Power button: power on/oﬀ, switch the playing mode, reset.
Pause button: play, pause, answer call, TWS.
Bluetooth button.
AUX-IN port.
TF card slot.
LED indicator.
Type-C charging port.
Microphone.

THE SPEAKER’S BATTERY
A built-in rechargeable battery powers the speaker.

CHARGING

Connect the supplied charging cable to the charge input and to a USB port on your computer or a USB charger.
The charging LED is lit red during charging. The LED turns oﬀ when fully charged.
It is recommended to charge 10 minutes before power on if you have 7 days unused, then you can continue to use while charging.

POWER ON/OFF
Power on: Long press the power button for 3 seconds to power on the speaker, then the Bluetooth indicator light is on and you can connect Bluetooth devices.
Power oﬀ: Long press power button 3 seconds to power oﬀ the speaker, and then Bluetooth indicator will turn oﬀ.

LED ON/OFF
Short press the Bluetooth button to turn on the led, when the led oﬀ then you can short press the Bluetooth button to turn it oﬀ.

CONNECT THE SPEAKER
Turn on the speaker, the Bluetooth indicator ﬂashing white slowly, on your device search for Bluetooth devices. Select the speaker from the list. It will give an indication of sound when the connection is successful. The Bluetooth indicator is ﬂashing all the time. Only one Bluetooth device can be connected at the same time. If you want to connect another device to the speaker, then ﬁrst disconnect the current one.
DISCONNECT THE SPEAKER
When it’s connected via Bluetooth: Long press the Bluetooth button to disconnect.

RECONNECT THE SPEAKER
Some Bluetooth devices support automatic reconnection, with those devices the speaker will automatically reconnect.
The speaker will not automatically reconnect on devices that do not support automatic reconnection. When it’s not connected: long-press the Bluetooth button second to connect to the last disconnected device.
PLAYING MODE
Short press power button to switch diﬀerent playing mode: BT, AUX, TF.
PLAY MUSIC USING A MICRO SD CARD
Connect a micro SD card and power on the speaker.
AUDIO CABLE CONNECTION
Power the speaker on.
Connect a 3.5 mm audio cable to the speaker and your device.
The speaker is now connected to your device.
THE PAUSE BUTTON’S FUNCTIONALITY
Short Press: 1) Music playback status: play, pause function.
2) When there is an incoming call: answer the call.
3) When you’re receiving the call: hang up the phone call.
Long Press: 1) When you’re calling: Press 2 seconds to reject the call.
2) Press 2 seconds to enter the TWS connection, once connected, press 2 seconds to disconnect the TWS connection.
3) Long press for 5 seconds to clear the pairing information and return to the default volume with a beep, it will automatically turn oﬀ.
.Double press: When it’s connected via Bluetooth to your phone: to call back the last call.
CHANGE VOLUME AND SONG
When listening to music
Increase volume: Short press on the “+” button.
Decrease volume: Short press on the “- “ button.
Previous song: Long press on the “-” button.
Next song: Long press on the “+” button.
HANDS-FREE FUNCTIONALITY

Turn on the speaker and the BlueTooth indicator will ﬂash white.
Short press the pause button to answer the call on the speaker, you can talk to each other through the microphone hole, after the call ended, it will continue to play music.
Long press the pause button on the speaker to reject an incoming call.
The Bluetooth indicator will be solid white, only one Bluetooth device can be connected at the same time.

RESET FUNCTIONALITY
Press and hold the power button for 10 seconds to automatically reset the speaker and turn it oﬀ.
AUTOMATICALLY TURN OFF FUNCTIONALITY
The speaker will automatically turn oﬀ in 10 minutes when Bluetooth is not connected and no music is playing.

TECHNICAL PARAMETERS

Model: OZ-E100mini
Bluetooth: V5.0
Speaker: Ø43mm 4Ω 5W*2
Built-in rechargeable battery: Li-on, 3.7V, 1800mAh
Charging time: 3 hours
Playing time: 7 hours
Input: 5.0V 1.0A
Product Size: Ø84*106mm
Product Weight: 320g
Waterproof level: IPX7
Range: Up to 10m

PACKAGE INCLUDING

1pcs* E100mini wireless speaker
1pcs* Product manual
1pcs* Type-C USB cable

TWS CONNECTION

Turn on both speakers
Press and hold the Play/Pause button on one of the speakers for about 2 seconds until you hear a “beep” sound. The default is the primary speaker that you operated the Play/Pause button of this speaker for pairing initially.
Release play/Pause button. It can take a few more seconds before speakers connect to each other. Check the indicator lights to distinguish the L/R channel: The white light on one speaker is flashing white for every 3 seconds that should be the left channel(the primary speaker); the white light on the other the speaker is solid white that should be the right channel
Go into the Bluetooth menu on your smartphone and pair the speakers with your phone by selecting the speaker model number. (it will only display 1 number which is both combined into one)

TWS DISCONNECTION

Press and hold the Play/Pause button on one of the speakers for about 2 seconds until you hear a “beep” sound

EXPLANATION

the symbol indicates: The product is only suitable for safe non-tropical climates.
Note: Please use the same type or equivalent type of battery to replace if the battery is scrapped. Otherwise, maybe an explosion occurs.
The lithium battery may not be exposed to such as ﬁre or excessive heat.

FAULT AND MAINTENANCE

First fault: connection failed.

Solution:

Please check whether the multifunction indicator light ﬂashes white. Please power on your speakers if the light isn’t on. Please charge the speaker if the light is still not on.
Please turn oﬀ the other Bluetooth devices, if there are many Bluetooth devices surrounding. This may result in search diﬃculties.
Restart wireless speaker on devices for Bluetooth search function.

Second problem: The music player appears sound breaks.

Solution:

View the distance between the player and the speaker has not been exceeded the oﬀective Bluetooth connection distance of 8-12meters.
Ensure there is not an obstacle between the play device and speakers.
Check the playback device or whether the speaker is in a low power state.

NOTES BEFORE USE
This product is designed with full attention for safety performance. To ensure safe operation, please follow the following rules:

Place the speakers in a stable position to avoid falling and causing damage or personal injury.
Do not drop, disassemble, open, crush, bend, puncture, burn speaker.
Do not close to any heat source (such as radiators, heating equipment, stoves, or other heat-generating equipment) where the use of speakers.
Please send a professional maintenance staﬀ to repair for any reason damage.
Before wiping with a dry cloth to clean the speakers, set the power switch to the oﬀ position and unplug the power cord from the power outlet.
Health considerations, please adjust the sound to a suitable level.

FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

WARNING:
Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

There is no sound?
Adjust the volume.
Make sure that your Bluetooth device is within range.
Ensure there is no obstacles in the way that can block/disturb the signal.
Check via the device’s Bluetooth connection if the speaker is connected with the device.
There is a poor sound quality?
Move the device closer to the speaker or try removing obstacles between them.
Cannot connect the device with the speaker?
Disconnect other connected devices and then try again.
You can force a disconnection by moving out of the Bluetooth range (10 m).
In order to avoid harming the product performance, please do charge your device every 3 months at least.