Shelly-Pro 4PM 4 Channel DIN Rail Mountable Relay Switch with Wi-Fi User Guide

Shelly-Pro 4PM 4 Channel DIN Rail Mountable Relay Switch with Wi-Fi

INTRODUCTION

Shelly devices can be controlled and managed directly in the local network or by using the Shelly cloud service ac- cessible via the Internet.
Download the Shelly Cloud Application by scanning the QR code above, or access the devices through the Embedded web interface, explained further down in the user guide.
Shelly devices are compatible with Amazon Echo and Goo- gle Home supported functionalities. See details at https://shelly.cloud/compatibility/.

REGISTRATION

The first time you load the Shelly Cloud mobile app, you have to create an account which can manage all your Shelly devices. You need to use an actual e-mail because that e-mail will be used in case of а forgotten password!

FORGOTTEN PASSWORD

In case you forget or lose your password, click the “Forgot Password?” link on the login screen and type the e-mail you used in your registration. You will receive an e-mail with а link to а page where you can reset your password. The link is unique and can be used only once.

ATTENTION! If you are unable to reset your password, you have to reset your device (as explained in “Device Inclu- sion” section, Step 1).

FIRST STEPS

After registering, create your first room (or rooms), where you are going to add and use your Shelly devices. Shelly Cloud allows you to create scenes for automatic control of devices at predefined hours or based on other parameters like temperature, humidity, light, etc. (with available sensors in Shelly Cloud). Shelly Cloud allows easy control and monitoring using a mobile phone, а tablet, or a PC. Shelly Pro 4PM can be grouped with other devices in the application, as well as be set to trigger actions on other Shelly devices.

DEVICE INCLUSION

Step 1

When the installation of Shelly is done and the power is turned on, Shelly will create its own Wi-Fi Access Point (AP).

⚠WARNING! In case the device has not created its own AP Wi-Fi network with SSID like ShellyPro4PM-84CCA87E3EFC, please check if the device is connected according to the User and Safety Guide, Installation Instructions. If you still do not see an active Wi-Fi network with SSID like ShellyPro4PM- 84CCA87E3EFC, or you want to add the device to another Wi-Fi network, reset the device. If the device has been powered on, you have to restart it by powering it off and then again on. After that you have one minute to press 5 consecutive times the button/switch connected to the SW terminal. You should hear the relay trigger itself. After the
trigger sound, Shelly Pro 4PM will return to AP mode. If not, please repeat or contact oour customer support at:
support@shelly.cloud 

Step 2
Please keep in mind that Shelly devices’ inclusion is differ- ent on iOS and Android devices.

1. iOS inclusion – On your iOS device, open the Settings menu > WLAN and connect to the Wi-Fi network created by your Shelly device, e. ShellyPro4PM-84CCA87E3EFC ( fig. 1 ).
   Open your Shelly app again and type in your home Wi-Fi credentials ( fig. 2 ).
   

2. Android inclusion – From the hamburger menu on the main screen of your Shelly App choose “Add device“. Then choose your home network and type in your password (fig. 3). After that, pick the Shelly device you want to include.
   The name of the device will be similar to: Shelly- Pro4PM-84CCA87E3EFC (fig.

Step 3
Approximately 30 sec. after discovering any new devices оn the local Wi-Fi network, а list will be displayed in the “Discovered Devices” room by default.

Step 4
Select “Discovered devices” and choose the device you want to include in your account.

Step 5
Enter a name for the device (in the “Device Name” field). Choose a “Room” where the device will be positioned and controlled from. You can choose an icon or add a picture to make it easier to recognize.Press “Save device”.

Step 6
To control Shelly devices only through the local network, press “No”

DEVICE SETTINGS

After your Shelly device is added in the application, you can control it, change its settings, and automate the way it works. To switch the device on and off, use the ON/OFF button. For device management, simply click on the de- vice’s name. From there you may control the device, as well as edit its appearance and settings.

STATUS AND CONTROL

Upon clicking on the device’s name, you will be able to view real-time power consumption data under “Status and Control”. By using the calendar on top, you can go back and view your consumption history for any given period.

SETTINGS MENU

Here, you can change the settings of your device.

Timer: Аllows you to manage the power supply automatically. You may use:

• Auto ON: After turning off, the relay output will be automatically turned on after a predefined time (in seconds).

• Auto OFF: After turning on, the relay output will be automatically turned off after a predefined time (in seconds).

Schedule: This function requires a working connection to the Shelly may turn on/off automatically at a predefined time and day throughout the week. Additionally, Shelly may turn on/off automatically at sunrise/sunset, or at a specified time before or after sunrise/sunset. You may add up to 20 weekly schedules.

Internet: Configure Wi-Fi, AP, Cloud, Bluetooth, MQTT settings.

• Wi-Fi 1: Allows the device to connect to an available WiFi After typing the details in the respective fields, press Connect.
• Wi-Fi 2: Allows the device to connect to an available WiFi network, as a secondary (backup), if your primary WiFi net- work becomes unavailable. After typing the details in the respective fields, press
• Access Point: Configure Shelly to create a Wi-Fi Access After typing the details in the respective fields, press Create Access Point.
• Ethernet: Connect the Shelly device to a network using an ethernet This requires a device reboot! Here, you can also set a static IP address.
• Cloud: Connection to the cloud allows you to control your device remotely and to receive notifications and up-
• Bluetooth: Enable/disable
• MQTT: Configure the Shelly device to communicate overMQTT.

Safety

• Max Power Protection: Configure Shelly Pro 4PM to turn off when power consumption reaches a set level (range 1W – 4480W)
• Max Voltage Protection: If the supply voltage becomes above a set value, the channel will be switched
• Max Current Protection: If the supply current becomes above a set value, the channel will be switched

Application Settings

• Device Name: Set a name for your
• Input State Display: View the state of your input (on/off). An option is available to add input state identifier to the power
• Exclude from Event Log: Do not show events from this device in the
• Consumption calculation: Tracks the total energy con- sumed by the
  Exclude from total room consumption: Option to exclude the device from the room’s total power
  Exclude from total account consumption: Option to exclude the device from the account’s total power con-

Webhooks

Use events to trigger http endpoints. You can add up to 20 webhooks.
Share
Share the control of your device with other users.

Settings

• Input/Output Settings: These settings define the way the attached switch or button controls the output state. The possible input modes are “button” and “switch”, and the relay mode can be chosen depending on the preferred usage of the device.
• Invert Switch: When the input is on, the output is off and when the input is off, the output is on.
• Appliance Type: Choose from a given list what type of appliances your Shelly Pro 4PM will be used with. The available options are “Socket, Lights, Heating, Entertainment”, however a custom one can be set as well.
• Firmware version: Shows your current firmware version. If a newer version is available, you can update your Shelly device by clicking Update.
• Geo-Location And Time Zone: Set your time zone and geo-location manually, or enable/disable automatic detection.
• Device Reboot: Reboot your Shelly Pro 4PM.
• Factory Reset: Remove Shelly Pro 4PM from your account and return it to its factory settings.
• Device Information: Here you can view the ID, IP and other settings of your device. Upon clicking “Edit device”,
  you can change the room, name or image of the device.

THE EMBEDDED WEB INTERFACE

Shelly can be set and controlled through a web browser.

ABBREVIATIONS USED

Shelly ID – the unique name of the device. It consists of 12 hexadecimal characters, the base MAC address of the device. It may include numbers and letters, for example 84CCA87E3EFC.
SSID – the name of the Wi-Fi network, created by the device, for example ShellyPro4PM-84CCA87E3EFC.
Access Point (AP) – the mode in which the device creates its own Wi-Fi connection point with the respective name (SSID).
Wi-Fi – the mode in which the device is connected to another Wi-Fi network.

INITIAL INCLUSION

• Step 1
  Install Shelly following the connection diagrams described in the instructions included with the device, and place it into the breaker box. After turning the power on, Shelly will create its own Wi-Fi network (AP).
  ⚠ WARNING! If you don’t see the AP, please fоllow step 1 from the “Device Inclusion” section of this guide.

• Step 2
  Shelly Pro 4PM has created its own Wi-Fi network (AP), with name (SSID) such as ShellyPro4PM-84CCA87E3EFC. Connect to it with your phone, tablet, or PC.

• Step 3
  Type 192.168.33.1 into the address field of your browser to load the web interface of Shelly.

GENERAL- HOME PAGE

This is the home page of the embedded web interface. If it has been set up correctly, you will see information about the state of the four switches (ON/OFF) and common functionality menus. For individual functionality menus, choose one of the four channels.

DEVICE

Get information about your device’s firmware version and location. Perform reboot and factory reset. Set your time zone and geo-location manually, or enable/disable automatic detection.

Authentication – you can set credentials to lock your device or change already existing credentials.

Invert Switch: When the input is on, the output is off and when the input is off, the output appliance Type : Choose from a given list what type of appliances your Shelly Pro 4PM will be used The available options are “Socket, Lights, Heating, Entertainment”, however, a custom one can be set as well.

NETWORKS:

Configure Wi-Fi, AP, Cloud, Bluetooth, MQTT settings.

SCRIPTS:

Shelly Pro 4PM features scripting capabilities. You can use them to customize and enhance device functionality based on a users’ specific needs. These scripts can take into consideration device state, communicate with other devices, or pull data from external services like weather forecasts. A script is a program, written in a subset of JavaScript. You can find more at…https ://shelly-api-docs.shelly.cloud/ gen2/Scripts/ShellyScriptLanguageFeatures/

CHANNEL SETTINGS

Press the channel that you want to configure. Click on“Channel Settings”.
Here the general settings about the channel will be displayed.
You can configure I/O settings, channel’s state,  channel’s name, consumption type, etc.

• Input/output settings – input mode and relay type define the way the attached switch or button controls the output The possible input modes are “button” and “switch”, and the relay mode can be chosen depending on the pr- effered usage of the device. “Set relay power-on default” allows you to choose the default state of the relay when power is on.
• Invert Switch: When the input is on, the output is off and when the input is off, the output is
• Max Power Protection: Configure Shelly Pro 4PM to turn off when power consumption reaches a set level (range 1W – 4480W)
• Max Voltage Protection: If the supply voltage becomes above a set value, the channel will be switched
• Max Current Protection: If the supply current becomes above a set value, the channel will be switched
• Channel Name: Set a name for the chosen channel
• Consumption type – Choose the type of appliance that the device will be controlling and measuring i.e lights, heating.
• PIN lock – Restrict control of the Shelly device through the web interface by setting a PIN code. After typing the details in the respective fields, press “Restrict Shelly”.

TIMERS

Аllows you to manage the power supply automatically. You may use:

• Auto ON: After turning off, the relay output will be auto- matically turned on after a predefined time (in seconds).

• Auto OFF: After turning on, the relay output will be auto- matically turned off after a predefined time (in seconds).

SCHEDULES

This function requires a working connection to the Internet. Shelly may turn on/off automatically at a predefined time and day throughout the week. Additionally, Shelly may turn on/off automatically at sunrise/sunset, or at a specified time before or after sunrise/sunset. You may add up to 20 weekly schedules.

WEBHOOKS

Use events to trigger http endpoints. You can add up to 20 webhooks.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>