Xiaomi Mi TV Stick Global Version Quad CoreBit Android 9.0 Installation Guide

Xiaomi Mi TV Stick Global Version Quad CoreBit Android 9.0

What’s in the box

• Mi TV Stick

• Voice Remote
  2 × AAA batteries required. Not included in box

• Power Adapter

• HDMI extender cable

Installation guide

1. Plug Mi TV Stick into TV’s HDMI port
2. Plug the power adapter into a socket
3. Switch your TV to HDMI source accordingly in TV settings Input / Source button on TV
4. Set-up Mi TV Stick and connect to Wi-Fi networking
5. Enjoy streaming content from your favourite apps

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol together, Digital Surround, and the DTS 2.0+Digital Out logo, are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmi°er must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmier. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The shielded HDMI cable must be used with this unit to ensure compliance with the Class B FCC limits.

The Wi-Fi module complies with FCC radiation exposure limits set forty for an uncontrolled environment.
Operating temperature range：-10 °C to +45 °C

IC Statement

This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2.  this device must accept any interference, including interference that may cause undesired operation of the device.

Innovation, Science and Economic Development Canada ICES-003 Compliance Label:
CAN ICES-3 (B)/NMB-3(B)
The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.

the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to
co-channelmobile satellite systems;

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WARNING

Do not mix old and new ba˝eries and Do not mix alkaline, standard (carbon- zinc) or rechargeable (ni-cad, ni-mh, etc.) ba˝eries.
This product contains technology subject to certain intellectual property rights of Microso˙. Use or distribution of this technology outside of this product is prohibited without the appropriate licence(s) from Microso˙.

Content owners use Microso˙ PlayReadyTM content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM- protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microso˙ to revokethe device’s ability to consume
PlayReady-protected content. Revocation should not a˜ect unprotected content or contentprotected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

WARNING: Cancer-www.p65warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>