nixplay W15F Wifi Digital Photo Frame User Guide

W15F Wifi Digital Photo Frame
User Guide

How to be an
Expert Nixplayer
A Brief Guide to Your Nixplay
W15F
Wifi Digital Photo Frame
You can get thee-label in the information section of the setting

Read This First, Please
Nixplay cares deeply about providing your family with a great frame and service. We go to great lengths to ensure your frame is delivered into your hands in perfect working order.
If your Nixplay isn’t working perfectly, please do let us know. We’re here to help.
We’re just a phone call, email, or chat away.
Find our telephone number, email, and web address at the back of this guide.

Important Safety Information

Please read all instructions before use. Retain instructions for future reference.
Battery Warning:
The remote control supplied, is powered with and includes a coin/button cell battery.

1. Do not ingest battery – chemical burn hazard. If the coin/button cell battery is swallowed, it can cause severe internal burns.
2. Keep new and used batteries away from children.
3. If the battery compartment does not close securely, stop using the product and keep it away from children.

CAUTION

• Risk of explosion if the battery is replaced by an incorrect type;
• disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
• leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
• a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

If you think batteries might have been swallowed or placed inside any part of the body, please seek immediate medical attention.

Get to know your Nixplay Smart Photo Frame

A) Senses movement and turns the frame on and off when the motion sensor is enabled.
B) Infra-red Sensor: Receives signals from the remote control.
*On Nixplay Smart Photo Frame (Metal), these sensors are not visible from the exterior.

C) Infra-red Transmitter
D) On / Off
E) Navigation Menu
F) Back
G) Settings
H) Display Playlists (photos only)
I) Transition effects when playing photos
J) Select / Play / Pause
K) Volume Up
L) Volume Down
Not applicable to Nixplay Smart Photo Frame (Metal)

Before using the Remote Control

M) Remove battery protector.
N) Insert 2 x AAA batteries (included).

Positioning your Frame

Free-standing in portrait or landscape mode. Use the cable stand to position your frame in portrait or landscape mode.
Don’t worry: the stand has a rigid design and can also be angled to position your Nixplay view perfectly.
When not in use, the remote control can be attached behind the frame by a magnet (not applicable when wall mounted).

Wall mounting your Frame

1. Remove the back cover by sliding it to the left to access the wall mount holes.
2. Use the included Wall Mounting Guide to align where the screws need to be drilled on the wall. 2 x M4 screws are included and required for a wall mount. Depending on your wall type, you may need to drill in the included anchors before securing the screws.
3. Leave a 10mm gap between the wall and the head of each screw where the power cable can run through.

4. Connect the power cable directly into the port behind the frame. (If your cable comes with a clip, remove it before wall mounting.)
5. Mount the frame onto the 2 screws and slide down to lock it into place.
   On 13.3″ and 15.6″ models, VESA 75 x 75 wall mounts are compatible.

Wall- mount video guide: www.nixplay.com/wall-mount

Create your Nixplay account

1. Download the Nixplay app Search for ‘Nixplay’ on the Apple Store or Google Play. If apps aren’t your thing, you can do all of the above by logging in at www.nixplay.com.
2. Create your Nixplay account You’ll need one to pair and manage your frame. Use your email address and create a unique password to create an account.
3. Login to your new Nixplay account.

Power your Frame

1. Plugin your Nixplay frame.
2. Point your remote control at the sensor of your Nixplay screen to control your frame. Follow the on-screen instructions.

• For Nixplay Smart Photo Frame (Metal), your remote control will simply work at short range.

Pairing your Frame

1. Connect your frame to Wi-Fi Enter your WiFi password using your remote control. Once connected, a 16-digit serial number will appear on your frame screen.
2. Select ‘Pair a New Frame’ in your Nixplay app or after logging in to www.nixplay.com. Enter the 16-digit serial number shown on your frame. You are now paired and ready to start sharing memories!

Start Sharing

1. In your Nixplay mobile app, you can:
   a. Share a photo or video to a playlist and assign a playlist to a frame.
   b. Invite friends to share photos of your frame. When you do so, your friends will get an email invite to download the Nixplay app, from which they can share photos or videos to your frame.
   c. Connect to Google Photos and create a dynamic, ‘always on’ connection, ensuring that your Nixplay is always up-to-date with your Google Photos.
   d. Control all settings of your frame, playlists, and photos.

2. Need help? Something not working? We’re just a phone call, email, or chat away. Go to nixplay.com/support for details or to find an answer to your question in our Help Center.

FCC Compliance Notification

Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Compliance Notification

Warning:
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

FCC compliance statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED compliance statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Cet equipement est conforme aux limites d’exposition aux radiations FCC/IC CNR-102 etablies pour un environnement non control& Cet equipement doit etre installe et utilise avec une distance minimale de 20 cm entre le radiateur et votre corps.
Something’s Wrong?
Need Answers?
Or Help?
We’re just a phone call, email, or chat away.
Find answers in our online Help Center
www.nixplay.com/support
Contact us
[email protected]
Call us
United States (855)-649-7529 I (855)-DISPLAY I Mon-Sat I 9 am – 5 pm, Central Time
United Kingdom 01784 605 066 I Mon – Fri I 7am – 5pm, GMT
Deutschland +49 32 211 122362 I Bitte hinterlassen Sie eine Nachricht.
Wir melden uns umgehend zur~ck.

Happy Nixplaying!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>