SIMPNIC Smart AI Camera Installation Guide
- June 6, 2024
- SIMPNIC
Table of Contents
SIMPNIC Smart AI Camera Installation Guide
Package contents
-
Smart Camera
-
Quick Installation Guide
-
Micro USB Cable (1.5m)
-
USB Power Adapter
Product overview
- FHD Camera
- Microphone
- Light Sensor
- LED Indicator
- Micro SD card slot
- Speaker
- Power Input (Micro USB port)
- Reset Button
Setup your camera by SiMPNiC App
Preparation
-
Download SiMPNiC App Scan QR code to download the latest version of SiMPNiC App on App Store (iOS) or Google Play (Android).
-
Connect your mobile to Wi-Fi 2.4GHz network Please install your camera within Wi-Fi signal range.
※ Live video quality is related to Wi-Fi signal quality -
Plug in micro USB cable and USB power adapter to power on your camera.
Connect your camera to Wi-Fi router -
④ Open SiMPNiC App and follow the instructions to setup your account.
-
Select “Smart Camera” and follow the steps accordingly.
-
Hold reset button for 6 seconds. It will take about 1 minute to reset and reboot. The LED indicator will blink red.
-
Double check your Wi-Fi SSID and enter your Wi-Fi password.
※ Your camera can only connect to Wi-Fi 2.4GHz. -
SiMPNiC App will generate a QR Code automatically. Enable your camera to scan the QR code on your mobile (around 10-15 cm).
-
The LED indicator will blink blue and you will hear a signal tone.
-
The LED indicator will light in solid blue and you will hear another signal tone.
※ If LED indicator constantly blinks blue for some time and you hear the signal tone repeatedly, please try again from step ⑥ and reset your camera. -
Confirm “LED indicator is solid blue” and click “Next”.
Add your Camera to SiMPNiC App -
SiMPNiC App will find your camera automatically.
※ You can also scan the QR code on camera bottom label to add your camera to SiMPNiC App. -
Login with default password “admin” and setup a new password.
※ Please save your password carefully. -
You will find your camera in the list.
LED Indicator Status
Dim blue | Solid red| Power on and initiating the camera.
---|---
Red blinking| Standby to scan QR Code for establishing Wi-Fi connection.
Blue blinking| Trying to establish Wi-Fi connection.
Solid blue| Wi-Fi connection is established.
FAQ & Support
For customer support, please visit FAQ & Support or contact us via following
methods.
SiMPNiC Co., Ltd.
16-6, No. 79, Sec 1, Xintai 5th Rd., Xizhi Dist., New Taipei City 22101,
Taiwan
+886-02-6616-2026
support@simpnic.com
https://simpnic.com/
For more information, please follow us on social media.
Warranty
-
Warranty Disclaimer
Thank you for your interest in the products and services of SiMPNiC. This Limited Warranty applies to physical goods, and only for physical goods, purchased from SiMPNiC. -
What does this limited warranty cover?
This Limited Warranty covers any defects in material or workmanship under normal use during the warranty period. During the warranty period, SiMPNiC will repair or replace, at no charge, products or parts of a product that proves defective because of improper material or workmanship, under normal use and maintenance. -
What will we do to correct problems?
SiMPNiC will either repair the product at no charge, using new or refurbished replacement parts. -
How long does the coverage last?
The warranty period for physical goods purchased from SiMPNiC is 365 days from the date of purchase. A replacement physical good or part assumes the remaining warranty of the original physical good or 90 days from the date of replacement or repair, whichever is longer. -
What does this limited warranty not cover?
This Limited Warranty does not cover any problem that is caused by conditions, malfunctions, or damage not resulting from defects in material or workmanship. -
What do you have to do?
To obtain warranty service, you must first contact us to determine the problem and the most appropriate solution for you.
※ We may, at any time, and at our sole discretion, modify these Terms and Conditions of Use, including our Privacy Policy and Warranty, with or without notice to the user. Any such modification will be effective immediately upon public posting. Your continued use of our Service, products and official website following any such modification constitutes your acceptance of these modified Terms.
Terms & Conditions
Please find our latest Terms & Conditions at SiMPNiC website.
https://simpnic.com/index.php/terms-conditions/
Regulations
FCC ID: 2AX6X-AIPC-02-SW
NCC: CCAR21LP0991T1
BSMI: D3E105
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
※ SiMPNiC co. Ltd. is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.