Simpnic IRB-01-SW Smart IR Blaster User Manual
- June 6, 2024
- SIMPNIC
Table of Contents
Simpnic IRB-01-SW Smart IR Blaster
OVERVIEW
Main Function
- Work with Amazon Alexa/ Echo Dot& Google home.
- Manage your devices via your mobile phone or Voice Control
- Intelligent Schedule – Smart IR could create multiple schedules to turn on/off your electronic sets
- Learning Function (DIY) – Control all sets which use infrared signal
Function Key and Indicator Description
Plug it in. Check the W旧indicator flashing status. If it is flashing quickly,
you can directly connect it with your phone. If it is not, you need to set it
to the distribution network mode: Next to the USB power connector, there is a
“Reset” button, insert an slim object and pressing about 5-10 seconds until
the blue WiFi indicator flashes quickly.
Blue indicator flashes slowly means the network connection is abnormal, please
check the router or network configuration
PRODUCT BUTTON AND LIGHT
SPECIFICATIONS
HOW IT WORKS
Turn On Intelligence
Use your phone to Scan QR code or search “Smart Life” in app market to
download and Install the App. Register and log on the account.
Step 1: In homepage. Click··Add Device”” 一··Others””一··Universal Remote .. .””.
Step
2: Let the plug connect with the power supply, long press the “Reset” button
more than 5 seconds until the blue indicator enters _ into the fast flash
mode. Select “confirm indicator rapidly blinks” Step 3: Enter your WI Fi password for
your phone and click “Confirm” to enter the page of the search device
Step
4: Enter the device page, then complete the configuration. Then click “Add
remote:•you can see page Select the remote device type. Choose a set you want
to control.
Use Air conditioner as a sample. Click “Air Conditioner”. Search your brand
and click it, then you can see the control page. Click Power button and watch
if your Air conditioner can turn on/off. If so, click “Can use, this” then you
can control your AC by that page. If no, click “I can’t use it”, then click
power button and watch if your set can tum on/off again until it’s works.
Learning Function
Step 1: CIiek “DIY” In this page. And CIiek “Next”
Step 2: When this page show, you can start DIY. Press the keys you want to learn When DIY, please noted three points
- Make sure a red light on. You will find the red light when you close to the product, because the red light inside it (at the back of the blue light).
- Make the controller towards the red light.
- The distance between the controller and the IR no more 6M (if old version. just 3CM) . The closer the better. Too far maybe fall to leam.
Step 3: When this page show, it means DIY success. Input the name of the key and confirm
Step 4: Then you can Continue to DIY or Save this controller
HOW IT WORKS WITH AMAZON ALEXA AND ECHO
Step 1: Open the” Amazon Alexa”APP, make your Alexa/Echo speaker link to the Alexa App
Step 3: Select your country code and Enter your “Smart Life” APP Account and Password, then press the “Link Now” button. Choose “Smart Life”. When the Account success to login press”Authorize” button.
Step 4: Back to the menu, and press the “Smart home” button, then choose the “Devices”, then press the “Discover” button When this page show, it means you have linked the Smart Life App to Alexa successful. Come back to Alexa App
Step 5: Now you can use your Alexa to control your Smart devices, enjoy yourself
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Warranty
Documents / Resources
|
Simpnic IRB-01-SW Smart IR
Blaster
[pdf] User Manual
IRB-01-SW, IRB01SW, 2AX6X-IRB-01-SW, 2AX6XIRB01SW, IRB-01-SW Smart IR Blaster,
Smart IR Blaster, IR Blaster
---|---