Glamcor Global RIKI JET SETTER LED Lighted Phone Case for iPhone 11 Instruction Manual
- June 6, 2024
- Glamcor Global
Table of Contents
Glamcor Global RIKI JET SETTER LED Lighted Phone Case for iPhone 11
Instruction Manual
Instructions
-
Snap phone case onto phone
-
Tuck the top of your phone into the inside top of the case, and firmly snap the bottom of your phone into the case A.
-
To remove your phone from the case, simply follow the steps above in reverse
-
Get familiar with the controls
NOTE
Illuminate your selfies by turning on the lights facing the front or back.
- Press and hold to power on/off
- Five brightness levels
- Color temperature adjustment
- Switch lighting from front to back
- Photo booth function
- Bluetooth power
This will take three photos in succession with warm, neutral, and cool light!
-
Photobooth function
-
Press and hold the Bluetooth button until the blue light blinks (about 3 seconds)
-
Pair your iPhone in your Bluetooth settings
-
Open your camera app
-
Select which side to illuminate
-
Press the photo booth button to take your selfies
-
Battery charging information
NOTE:
A full charge from empty will take four hours
-
Insert Micro USB plug into side of the phone case as indicated.
Plug the USB end into a standard 5V USB charging cube or other USB powering device
WARNING: FOR INDOOR USE ONLY
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency, energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the used is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the received in connected.
- Consult the dealer or an experienced radio TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.