Shenzhen Kaka Intelligent Technology T13 Bluetooth Wireless Hearing Aid Headset User Manual
- June 6, 2024
- Shenzhen Kaka Intelligent Technology
Table of Contents
Kaka Intelligent
Technology T13 Bluetooth Wireless Hearing Aid Headset
User Manual
FCC ID:2A2MX-T13
Packing list
Earphone: 1, charging cable: 1, silicone earplug: large, medium and small,
each pair, instruction manual: 1, packing box: 1 set
Product specifications
Product Name: Bluetooth wireless hearing aid headset
Bluetooth distance: 10M
Bluetooth Name: T13
Input / output: 5V / 1A
Headset battery: 40mAh
The battery in charging chamber: 400mah
Charging time: 2h
Operation guide Hearing aids
- Open the cover, take out the left and right earphones, put on both ears respectively, and the earphones will automatically turn on the hearing aid function
- Click left headphone or right headphone to automatically switch 4 levels of hearing aid volume
- Three consecutive clicks on the left or right headphones can turn off or turn on the hearing aid function
Playing music with Bluetooth
- Open the cover of the charging chamber, take out the earphone, and the earphone will pair automatically
- Turn on the Bluetooth of the mobile phone, search the pairing name T13, and connect the headset
- Open the mobile music player to listen to music
- Put the earphone back into the charging bin and turn off the music playing function automatically
- Long press the left headset for 2 seconds to switch to the previous song Long press the right headset for 2 seconds to switch to the next song
- Click on the left ear to decrease the volume by one space Click on the right ear and add 1 volume
Answer the phone
- When an incoming call rings, double-click the left or right earphone to answer the call
- During a call, double-click the left or right headset to hang up
- When an incoming call rings, press the left or right earphone for 2 seconds to reject the call
- During the call, click the left headphone to decrease the volume and the right headphone to increase the volume
One key reset (restore factory settings)
Put the earphone into the charging chamber, open the charging chamber cover and press the round button of the charging chamber for 10 seconds to clear all pairing records and automatically restore them to the factory settings.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in an articular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>