Honoto Technology WLS-A01 Freedom Charge User Manual
- June 6, 2024
- Honoto Technology
Table of Contents
User Manual
Thank you for choosing our Honoto Wireless Charger. To ensure optimal performance from this product, please read this user manual carefully and keep it safe for future reference, along with your receipt
Safety Guidelines
- Do not disassemble the product in an attempt to modify, repair, or for any other purpose.
- Do not store in high temperatures such as intense sunlight or other fonts of heat.
- Do not place any magnetic stripe cards or similar items (e.g.credit cards, ATM cards, boarding passes, etc.) near this product as the magnetic data on this product may get damaged.
- Do not drop, knock, or shake this product. Keep your product in a dry area Humidity and liquids may damage the parts or electronic circuits.
- Use the original or a certified cable only
Product Features
What’s inside
Operating Instructions
Connect the Wireless charger to a USB charger using the cable provided. When the charger is turned on, the LED light will flicker alternately in red, green, and blue for 5S and then go out.
Wireless Charging:
Place your device on the center of the charging plate. The blue light stays on
while charging. If the device deviates from the center of the product, the
wireless sharpie fone on may be affected
wireless charging stand:
All devices are supported in both vertical and side laying charges.
charging:
the red light blinks when the wireless is charged with something foreign; the
green light stays on when the charged wireless is complete
Notes
- For I OW fast wireless charging mode, a QC 2.0/3.0 standard power adapter must be used for the power input.
- Compatible with 7.5W Quick Charger
- To maximize the performance of the USS output, a QC 2.0/3.0 standard power adapter or 5V 2.4A/3A power adapter should be used for the power input..
- The Photo Wireless Charger is engineered to work with the most lightweight smartphone cases. However, if the back of the smartphone case is thicker than 3mm or contains metallic, magnetic, or battery materials, it may affect the functionality of the wireless charger.
Product Specifications :
Model: WLS-Ao1
Type-C lnput:DC 5V-2A/DC 9V-2A
Output(Wireless):5W & 7.5W & I0W
Size: 13010421.5mm
Net Weight: 172g
Charging frequency:110-205 KHz
Transmission Distance:<8mm
FCC
The devices comply with part 15 of the FCC Rules.
Operations subject to the following two conditions :
- The devices may not cause harmful interference, and
- the devices must accept any interference received, including interference that may cause undesired operation .
The equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the types of equipment do cause harmful interference to radio or television reception, which can be determined by turning the types of equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, the devices must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.