UGREEN PB111 10000mAh Power Bank User Manual

June 6, 2024
UGREEN

UGREEN Logo

UGREEN PB111 10000mAh Power Bank

UGREEN PB111 10000mAh Power Bank

Product Details

Product Details

  1. Lightening Cable
  2. iWatch Magnetic Charging
  3. USB-A Output Port
  4. USB-C Port
  5. Battery Indicator
  6. Power Button

Instructions

  1. Power On
    Short press the button.

  2. Power Off

    • If no device is connected to this product within 30 seconds, it will automatically turn off.
    • Press and hold the button for around 3 seconds to turn it off.
  3. LED indicator light status
    A quick press on the button shows the current battery capacity. The LED indicators turn off automatically after 30 seconds.
    LED Indicator Light Status

  4. Charging product

    • Connect product to power adapter for charging.
    • Each light represents 25% of battery capacity. Indicators turn from blinking into staying on while fully charged.
    • Please use the power adapter that complies with the input standard of this unit.
  5. Discharging product

    • Charge the mobile device
      Connect the product to your mobile devices.

    • Fast charge the mobile devices
      The USB-C and USB-A ports could be used in fast charging separately.
      Notes:

    • When two devices connected at the same time, the product will return to the original 5V outputting in case of damage.

    • The device and the product should be compatible with the same fast charge protocol.

    • LED state of discharge
      The four power indicators turn off one by one during discharging. While the left one blinking, the battery capacity is lower than 10%.

Q&A

How to solve the abnormal discharge?

  • It is normal that the power bank stops outputting when the charging current is continuous below standard.
  • Please charge the power bank in time when it runs out of power.
  • When the product is protected (no response while pressing the button) due to short circuit and over-charging, please connect the product to the power adapter for restoring output.
  • When the working temperature exceeds the applicable temperature, the product enters overheat protection state (no output). Please move the product to the suitable condition and press the button to resume works.

 Attentions

  • DO NOT expose to heating devices.
  • Please use compatible or certified charging cables and adapters.
  • Please place this unit in ventilated area.
  • DO NOT disassemble, repair or modify this unit by yourself.
  • DO NOT drop, squeeze, puncture, short-circuit or throw it into fire or water.
  • Dispose of the product in accordance with local regulations.
  • Avoid using this unit in thunderstorm climates.

Package Contents

Package Contents

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals