UGREEN PB195 Magnetic Wireless Power Bank 10000 mAh User Manual

Magnetic Wireless Power Bank
10000 mAh
Model: PB195 | P/N：40826
User Manual

Product Overview

1. Wireless charging area
2. Power button
3. USB-C input / output
4. USB-A output
5. Power indicator lights
6. Holder

Notes

• The product is compatible with the MagSafe-enabled iPhone.
• This product is only suitable for original Apple cases with MagSafe or MagSafe-compatible cases by UGREEN.
• Do not put such magnetic objects as metal, magnetic strip card, credit card, public transport card, phone card, etc. beside the charging area of the wireless charger to avoid abnormal charging or product damage.

Power Button

1. Power On

2. Press once the button

3. Power Off
   • Press twice the button
   • It will power off automatically if no external device is connected for 30 seconds

4. Low-current Charging
   • Press and hold for 3 seconds, the indicator light flashes one by one indicating it enters low-current charging

5. Check Battery Level
   • Press once the button

Holder

Unfold the holder for using while charging

Wireless Charging

1. Press once to turn on
2. “click” to snap-on

Tips: Mind to press once the “power button” before each use.

Wired Charging

Tips: Press once the “power button” if the product fails to discharge.

Low-current Charging

• The product will automatically exit low-current charging after 2 hours.
• If your device is not fully charged after 2 hours, please press and hold the “power button” again to continue.
• Press the “power button” once could exit low-current charging.

Low Battery and Recharging

The last blinking LED indicates the remaining battery capacity is low, make sure to charge it in time. The indicators glow solid when the product is fully charged.

Specifications

Important Safety Instructions

• Fully charge the product before its first use.
• Do not use the all-in-one cable to charge multiple devices at the same time.
• For optimal performance, we recommend that you use UGREEN accessories such as charging cables and power adapters.
• Stop all use if the battery is swollen, leaking or deformed.
• Stop all use if the battery is submerged.
• Keep out of reach of children.
• When not in use, store the product in a dry environment. To preserve lifespan, recharge and discharge it every 3 months.
• The product may take a few seconds to start wireless charging, please wait patiently.

Warnings

• Do not expose the product to excessive temperature or areas which may become hot, including but not limited to, on or near vehicles, space heaters, cooking appliances like the oven.
• Using an unapproved or incompatible power adapter, the USB cable may result in fire, explosion or other hazards.
• Do not store the product in a restricted ventilation area like a handbag, a closed-in area may result in fire or other hazards.
• The product contains a Lithium-ion battery. Disassembling products may cause property damage or fire.
• Do not drop, crush, puncture, short-circuit, or dispose of in fire or water.
• Disposal of the product separately from household waste, following local regulations.
• Do not use the product during a thunderstorm, it may cause malfunctions or electric shocks.

Package Contents

Understanding The Battery Capacity And The Rated Capacity Of A Power Bank

The “Battery capacity” is a measure of the charge stored by the battery, whereas the “Rated Capacity” represents the output capacity. The reason is, on the one hand, the battery voltage and output voltage are different, since Li- ion batteries used in power banks output 3.7 volts (nominal) but your phones’ batteries get charged at 5.1 volts. On the other hand, energy is also lost during the conversion process from 3.7 to 5.1 volt and is unavoidable in any charging process.
Formula, Rated Output Capacity = Battery Capacity x Efficiency  (Battery Voltage) x Weighting Coefficient/ Output Voltage Note: Weighting Coefficient ≤ 1. Because the consistency of the product can be slightly different, in order to ensure that each shipped product can meet the rated capacity requirements, take a weighting factor less than and close to 1.
Eg: (Let’s take a 10000mAh power bank as an example.)
Battery Capacity 10000mAh, Battery Voltage 3.7V, Weighting Coefficient 1, the Efficiency 90%
Rated Capacity = 10000mAh×3.7V×0.9×1/ 5.1V= 6529mAh
The number of identification Rated capacities is between 6000mAh – 6500mAh.
*Note: Many other factors, such as ambient temperature and the exact chemistry of the powerbank and smartphone batteries also determine the real charging performance of the powerbank.

FCC Radiation Exposure Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference， (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference；
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>