Globe Electric GE50199 Smart Dimmer Switch User Manual

: June 6, 2024
: Globe Electric

Table of Contents

Documents / Resources
Read User Manual Online (PDF format)
Download This Manual (PDF format)

50199_W_C
PRINTING SPECIFICATIONS FOR SKU: WOK FIKUMECEIFSR
PANTONE PANTONE PANTONE PANTONE OC OC OC OC

CARD DIMENSION #x-R4

w (width): 140mm
h (height): 180 mm

CAUTION: REDUCE THE RISK OF ELECTRIC SHOCK, USE ONLY INDOORS. For use only in 120V/60HZ circuits. Risk of electrical shock. Do not open, no user- serviceable parts inside. This device is not intended for use with emergency exit fixtures or emergency exit lights, photocells, and electronic timers. Do not use where directly exposed to water. If this situation is undesirable for the application, follow the manufacturer’s instructions for replacing the device. The minimum operating temperature is -20°C (-4°F).
This device complies with Part 1S of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
RF EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance 20cm between the radiator & your body.
USER MANUAL NOTICE FOR LICENCE-EXEMPT RADIO APPARATUS
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-003(B).

RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

FCC RESPONSIBLE PARTY PARTIE RESPONSABLE FCC
Globe Electric / Globe Electrique
15301 Shoemaker Ave Norwalk, CA 90650
www.globe-electric.com
Globe Electric Company / Compagnie Globe Electrique 50199 01-108-21