Omarco MH-P36 Wireless Charging Power Bank Instructions
- June 6, 2024
- Omarco
Table of Contents
Omarco MH-P36 Wireless Charging Power Bank
Power On
Press
the power button once to activate AirBank.
Ideal Placement
Adhertng AirBank ln any dlrectk>n on back of smartphone will work. However, the most comfortable direction is to Place AlrSank In Moe and up straight with a smartphone., where the logo “AlrBank”will be horizontally In line with your smartphone. Furthermore. in this direction AlrBank’s power button will be in line with the right hand sided power button of your smartphone.
Clear Line
Suction cups will not get dirty If AlrBankis adhered on proper surfaces with the right intention of using Alr8ank. ff AirBank suction cups do get dirty, take a piece of tissue and damp the corner ci tissue slightly In the water. Then, dab the damp tissue on each suction cup. The process will take less than 10 seconds and the suction cup wiM return back to It’s full adhering strength.
Fast Wireless Charging
True fast wireless charging starts with AirBank. AirBank wiN fast
wireless charge your smartphone up to 10w.
USB APort
Plug magnetic: USB A adapter attached to one end of magentk cable to USB A port of AirBank. lhen, u.se desired smartphone magnetic O htning / micro usb / usb c) adapter attached to the other side of the magnetic cable to pk.Jg Inside of smartphone port
Fast Whd Charging
Once USB A and desired Input port of smartphone has been plugged, Alr6ank will
fast wire charge your smartphone ci up to 10w.
USB C Port
Plug magnetk: US8 C adapter attached to one end of magentk cable to use c port of AlrBank. lhen, use magnetk: use A adapter attached to the other side of the magnetk: cable to plug Inside 10wfastcharglng wall adapter.
Fast WhO- goAlrBonk
Once USB C and USB A ports have been plugged, AlrBank will be fastwl”‘ charged
of up to 10w.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>