Nanjing Maxship Textile MATCO-NAPA Fashion Music Hat Instruction Manual

Nanjing Maxship Textile MATCO-NAPA Fashion Music Hat

PRODUCT CHARACTERISTIC

1. Support Bluetooth Communication And Bluetooth Music.
2. Low Loss High-Quality Stereo Sound.
3.  Built-in Lithium-ion Battery With MICRO USB Charging Function.
4. LED Display For Working Statis.
5. User-Friendly Function Design.

PRODUCT SPECIFICATION

1. Charging Time: 2H
2. Bluetooth Talk Time: 8-lOH
3. Bluetooth Music Time: lOH(At 70% Volume and Below)
4.  Power/Handfree/Stop/Play
5. Vol Up/Next @
6. Vol Down/Previous =

PRODUCT FACTORY CONFIGURATION

1. Hat — 1 Pcs
2. Bluetooth earphone (installed inside hat)— 1 set
3.  Instruction Menu— 1 Pcs
4. Charging Cable— 1 Pcs(Matching)

ATTENTION: Please fully charge the headphones before use!
BLUETOOTH EARPHONE ON/OFF

1. POWER ON:
   Long press the STOP button till RED and BLUE Lights Flashes. During flashes, earphones work in pairing mode, search for Bluetooth device, and request for pairing. (If previously have been paired with Bluetooth Device,Power On Flashes BLUE Light),

2. POWER OFF:
   Long press STOP button to shut down earphone mode. (notification sound will be heard)

BLUETOOTH PAIRING INSTRUCTION

First time pairing, long-press PLAY/STOP for 2 sec to enter pa’1r’mg mode (RED and BLUE lights flashing), a slow BLUE Light flash when connection successfully completed. Bluetooth device will show Bluetooth connected, different devices display differently

BLUETOOTH HANDSFREE

1. Click play/pause to play music, click it again, the music will be stopped.
2. Double click play/pause to turn on SIR!, double click it again, SIR! will be turned off.
3. Long press the volume decrease button= for 2 seconds to turn down the volume
4. Long press the volume increase button @ for 2 seconds to turn up the volume
5. Click the volume increase button@ to jump to the next song.
6. Click the volume decrease button = to jump to the previous song.

CHARGING FUNCTION OPERATION INSTRUCTION

Connect the Android DataCabletoUSB charger (or computer USB port),the other end connects to our device as shown on the right diagram, our device have a LED indication on the right, RED light constant on shows that device ischarging, RED Light Off when fully charged.

BLUETOOTH VERSION
Compatible with major branded or China Brand mobile phones. If the mobile phone does not equipped with the AVRCP function then it will not be able to operate our device
NEXT or PREVIOUS song and PLAY/STOP function

FCC Warnings

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>