POWERADD S10 TWS Wireless In-Ear Bluetooth Earbuds User Manual

S10 TWS Wireless In-Ear Bluetooth Earbuds
User Manual

Product Introduction

Package Contents

2 x Wireless Earbuds
1x Battery Box
1 x Type-C Charging Cable
3x Ear Tip Sets (S/M/L)

Specifications

Instructor for the First Use

1. Put the two earbuds back into the charging box to charge (activate the earbuds after the red light is on)
2. Take out the earbuds. The earbuds will turn on and enter a state of waiting for pairing. (red and blue light flash alternately)
3. Turn on the Bluetooth on the mobile phone, search “S10” and click to connect
4. When the earbuds power on again, they will automatically reconnect to the last device used
5. Earbuds will power off automatically when put back into the charging case

Earbud Functions

TWS Pairing| In a power-off state, long-press the earbuds for 8s until the blue light quickly flashes.
---|---
Restore Factory Settings| When the blue & red lights flash alternately, triple-click the sensor button quickly. (For Single Earbud)
SIRI| In standby or music playing state, triple-click the sensor button quickly.
Power On| Earbuds automatically turn on once taken out from the batten/ box.
Press the sensor button for 3s.
Power Off| Earbuds automatically turn off once put into the battery box for charging.
Without music playing, press the sensor button for 5s.
Earbuds automatically turn off if no connection for 5min.
Previous Track| Double-click the sensor button (Left ear).
Next Track| Double-click the sensor button (Right ear).
Volume –| Long press the sensor button (Left ear).
Volume+| Long press the sensor button (Right ear).
Play/Pause| Single-click the sensor button (L/R ear).
Receive a Call| Single-click the sensor button (L/R ear).
Hang Up a Call| Long press the sensor button for 2s (L/R ear).
Reject a Call| Long press the sensor button for 2s (L/R ear).

Indicator

alternately)
Bluetooth to be Connected| Red/blue light flash alternately
Fails to Connect with Cellphone| Earbuds automatically off after Smin no connection
Re-Connection State After Remote Disconnection| Blue light flashes slowly
Remove the Pairing Record on the Phone| Red light on for Is and then earbuds turn off
Low Battery| Red light flashes every 3s
Charging Process| Red light steady on
Charging Completed| Red light off, blue light on for 3s, and then off

Cautions

1. Please do not use this product while diving as water will block the signal
2. Do not use corrosive liquid to clean this product
3. Do not disassemble the earbuds
4. To avoid explosion, please do not throw this product into fire
5. avoid scratches, please do not touch the earbuds with sharp objects
6. If this product is accidentally exposed to chemicals, flush it with water.
7. Do not insert objects into the earbuds, otherwise, it would cause damage to the internal components
8. Do not use this product under extreme circumstances for temperatures below 10C or above 60C
9. In case the earbuds run out of battery, please charge the earbuds when they’ soutofuse for more than a month
10. Please do not charge the product with a power adapter ofa current greater than 2A, excessive current flow could cause damage to the battery

Warranty

All POWERED products come with a full 2-year limited warranty from the date of purchase(accessories excluded). It will be out of guarantee if damaged due to incorrect use or force majeure

FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

http://www.ipoweradd.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>