POWERADD T18 Wireless Earbuds User Manual
- June 6, 2024
- POWERADD
Table of Contents
User Manual (T18)
Thanks for your purchase from POWERED. For the best performance and safety
purposes, please read this manual carefully before using the product. Please
keep this manual for further reference.
Product Introduction
Package Contents
- 2x Bluetooth Earbuds
- 2x Ear Tip Sets
- 1x Battery Box
- 1x Type-C Cable
- 1x User Manual
Specifications
| Model | T18 |
|---|---|
| Wireless Version | V5.0 |
| Earbud | 40mAh |
| Battery Box | 400mAh |
| Type-C Input | 5V |
| Connection Range | ≈10m |
| Waterproof Rate(Earbuds) | IPX7 |
| Load Impedance | 32Ω±15% |
| Frequency Range | 2.402GHz~2.480GHz |
| Charging Time(approx.) | 1.5h(earbuds), 2h(battery box) |
Earbud Function
- Power On: Long press the left/right earbud for 3s
- Power Off: Long press the left/right earbud for 5s
- Volume+: Long press the right earbud (volume keeps increasing)
- Volume-: Long press the left earbud (volume keeps decreasing)
- Play/Pause: Single-click the left/right earbud
- Previous Song: Double-click the left earbud
- Next Song: Double-click the right earbud
- SIRI Voice Interaction: Triple-click the left/right earbud
- Answer: Single-click left/right earbud
- Reject: Long press the left/right earbud for 2s
- Hang Up: Single-click the left/right earbud for 1s
- . Cancel an Outgoing Call: Long press the left/right earbud for 2s
- Clear Phone Pairing Information(restore factory settings): Long press the battery box for 8s(clear the pairing information between the earbuds and the Bluetooth devices)
TWS Pairing
- Open the charging box, the earbuds will automatically turn on, the white and red lights will flash alternately, and the TWS pairing will be performed automatically.
- When the earbuds are off, press and hold for 5S until the white and red lights flash alternately.
Reconnect
- Remove from the charging case, the earbuds will automatically connect to each other, after a few seconds, it will automatically connect back to the last paired Bluetooth device
- When the device is off, press and hold for three seconds to turn on the earbuds, they will automatically connect to each other after a few seconds. Finally, the paired Bluetooth device is paired; The pairing state lasts for 5 minutes. If there is no device to connect back within 5 minutes, the earbuds will automatically shut down if the connection fails.
Battery Box Charging Status
| White LED Light（ ON-OFF Flash） | Charging Status |
|---|---|
| 100% | |
| 75-100% | |
| 50%-75% | |
| 25-50% | |
| 0-25% |
Attentions
- When the earbuds power on again, they will automatically reconnect to the last device used.
- To ensure a great connection, please make sure the Bluetooth connection range is within 10m.
- Please fully charge the earbuds every 2 months even they’re not in use.
- Please put the product in a dry and airtight place to avoid moisture and dust.
- Please keep the product away from high temperatures and humid environments and avoid using it in the shower or rain.
Important Safety Instructions
- Do not expose to liquids.
- Do not disassemble.
- Avoid extreme temperatures.
- Please keep it out of reach of children.
Warranty
All POWERED products come with a full 2-year limited warranty from the date of
purchase(accessories excluded). It will be out of guarantee if damaged due to
incorrect use or force majeure.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.