Meauro APT02 Portable Outdoor Projector User Manual

PROJECTOR
Model: APT02

User Manual

*Safety Instructions

• For the best effects, please use the projector in a darker room or with the curtains closed.
• Please use the projector with caution, as dropping or collision may damage the components or cause blurred images and abnormal display.

Please carefully read this user manual before using the projector and keep it properly for future reference.

1. 1To ensure a steady power supply for the projector, please use the power supply circuit that meets your national electricity standard. Please use a grounded power outlet.
2. Use the type of power source indicated on the projector for the power supply.
3. Do not directly look into the lens of the projector while the projector is operating, as intense light may hurt your eyes.
4. Do not place the projector on objects (such as clothes, blankets, etc.) that may cause blockage on the air vents.
5. The product is not waterproof and should be prevented from water drenching or splashing. It’s recommended not to put items with liquid (such as vases, water glasses, etc.) near the projector.
6. Never let the projector get wet or let water get inside of the projector to prevent an electric shock.
7. Unplug the power cord if the product is not going to be used for a long time.
8. Use the original foam when transporting the product.
9. Do not dismantle the projector by yourself, otherwise, the warranty will become void.
10. Do not attempt to repair the projector by yourself if it is found to be faulty, and please contact our customer service.
    The device is only applicable for safe use in an environment with an altitude of less than 2000m. When used in an environment with an altitude above 2000m, there may be a safety hazard.

*What’s in the Box

l x Projector
1 x 19VDCAdapter
1 x Remote Controller (2x&AA batteries not included)
1 x User Manual

*Product Introduction

1.Front View

1. Lens

2. Dual Channel Speaker (Loudspeaker)

3. Air Vents
   2. Back View

4. On/Off Button

5. 19V DC Input

6. USB Port

7. HDMI Input

8. Indicator

9. Infrared Receiving Window

10. AV/3.5mm Headphone Jack

3. Top View

1. Portable Handle

2. Manual Focus Wheel
   4. Bottom View

3. 2 x Anti-skid Silicone Pads

4. Tripod Screw Hole

Infrared Remote Controller Features

1. On/Off Button
2. Previous
3. Mute Button
4. Next
5. Play/Pause Button
6. Up Ct Right|  7. Down
8.  Left
9. OK Button
10. Signal Selection Button
11. Return Button
12. Menu Button
13. Volume +
14. Volume –
---|---

*Operation Descriptions

Installing the Projector
When installing the projector, you can either place it on a solid and stable desktop or hang it to the ceiling via a mounting bracket. Ensure good ventilation around the projector and that no objects cover or block the air vents. There shouldn’t be any object within the 30cm range of the projector. For the best effects, the projection surface should be white and even.
By reference to the data in the following table and based on the preset projection sizes, you can put the projector in a place that maintains the best distance to the projection screen. To achieve a 40-200inch projection I mage, the minimum distance and a maximum distance of the projector to the projection surface should be 1.2m and 7m respectively.

Projection size (inch)| Screen length (cm)| Screen width (cm)| Distance between lens and screen
(cm)
---|---|---|---
40| 89| 50| 119
50| 111| 62| 148
60| 133| 75| 178
70| 155| 87| 208
80| 177| 100| 237
90| 199| 112| 267
100| 221| 125| 297
110| 244| 137| 326
120| 266| 149| 356

Note: The above data are for reference only, and please take the actual measurement as standard. Due to differences In optical elements, there is tolerance in these data. Advice: If you want to install the projector in a fixed place, you should first use it for actual testing to confirm the projection size and distance with reference to its optical properties, and then install it. Doing so will help you find the most suitable position for installation. The device is built-in with an automatic vertical keystone correction function, which is used for correcting the projection image.
Installation Method
Based on your user environment and need, you can either hang this projector to the ceiling via a special mounting bracket or place it on a stable desktop for front projection to the screen. Of course, you can also use other methods to install the projector by reference to the following pictures:

Notes:

• When using a mounting bracket for installation, the projector shouldn’t be above the upper edge of the screen, otherwise, it will affect the image effects or the keystone correction function.
• Be sure to install the projector at the symmetry axis of the left and right of the screen, so as to avoid keystone distortion on the left and right of the image. Ensure good ventilation around the projector after installation. There shouldn’t be any object that covers or blocks the air vents of the projector.
• Do not connect the projector to a power source during installation, otherwise, it may cause an electric shock or projector circuit fault.
• For projector that has just been installed: When you turn it on for initial use, keystone distortion and blurring may appear on the upper and lower edges of the image, please wait for automatic keystone correction and use the focus wheel for manual focus.

Power On/Off and Connection

1. Power On 0 The advanced version of the product contains a battery. For initial use, please first use the included charger to fully charge the built-in battery. (If you haven’ t selected the advanced version, then it doesn’t have a built-in battery.)
2. Press and hold the On/Off button to turn on the projector.
3. The projector will illuminate red light when connected to a power source, and after you press the On/Off button, the indicator will turn to green, and the projector wi II then starts working.
4. The system will run after the projector is turned on, and you need to wait for about 1 minute before any operation.
   2. Selecting Signal Source Input When the projector is to be connected to different device interfaces, you need to use the Signal Selection button on the remote controller to choose the corresponding input channel for connection, such as HDMI, AV signal

• Press the Signal Selection button on the remote controller, and you can directly call up the signal channel menu in any interface, then use Up or Down direction key to switch the signal channel.
• Press the OK button to choose the required signal channel.
• Press the Return button to cancel the connection or press the Signal Selection button again to choose another channel.

*Android Interface

1. Overview
Press the On/Off button to turn on the projector, and several seconds after the Android logo appears, you’ u then be directed to the main interface. Main Interface Introduction All Apps: Preinstalled system Apps and Apps downloaded by the user. Miracast: Miracast can realize fast screen mirroring between Android phone and projector Source: Select HDP signal or AV sIgnaL Browser Connect to USB drive for local playback. Add App: Add frequently-used App to the main interface.

2. All Apps
Use the remote controller to select All Apps and enter the sub-Interface to view preinstalled system Apps and Apps downloaded by the user.
3. Browser
After the USB drive is connected to the projector, use the remote controller to select Browser and open it, then select local disk device, and choose your USB drive to open any file (videos, images, songs, etc.). Select the file you want to open (the outline of the file will be highlighted once selected), then press the OK button to play, or press the Return button to exit. The local player supports the following formats:

Video files| M PEG-1, MPEG-2, MPEG-4ASP, MJPEG, DivX3\4\5, XviD,
H.264, H.265, VC-1, WMV3, RV8/9
---|---
Audio files| M PEG, Audio Layer, WAV (PCM, ADPCM), FLAC, APE, MC
(MC-LC, AAC-HE), PCM
Image files| JPEG, BM P, PNG

** Due to Dolby patents and copyrights, this machine currently doesn’t support any Dolby-related audio decoding.
4. Android Settings**
Use the Left and Right direction keys on the remote controller to move to Settings, then use Up, Down, Left, and Right direction keys to navigate to the corresponding settings, and press the OK button to enter the settings you selected.
Projection Image Setting Projection Mode: Choose Front-Desktop, Rear-Desktop, Front-Ceiling, or Rear-Ceiling.
Keystone Advanced: When the projector Is projecting upward, downward, leftward, or rightward, you need to open the 4-point keystone correction to adjust the image to a normal state. This technology uses electronic technology to realize the normalization of the projection image.
Manual Keystone Press the OK button to enter the sub-Interface, then use direction keys to select the point that needs adjustment, press the OK button to confirm the selected point, and after the selected point is confirmed, use direction keys to adjust it to the appropriate parameter. After adjustment, press the OK button to cancel the selected point and use direction keys to move to other points that need adjustment, then repeat the operation procedures mentioned above. Pressing the Menu button can realize a rapid reset.

*External Channel 051) Menu Settings

After the projector is connected to an external device such as H DM I, press and hold the Menu button, and you can call up the menu function to make adjustments to the sound and image. If you want to adjust the Settings menu, please perform the following steps:

1. Press the Menu button to enter the OSD menu, then press the Left or Right direction key to select the menu that needs to be set
2. Press the Up or Down direction key to move to the item that needs to be adjusted, and press the OK button to enter.
3. Press the Left or Right direction key to set the parameters.
4. Press the Return button to save the settings.

Main Items for Adjustment|
---|---
Item| Description
Image mode| Set and adjust the image display mode (Standard, Light, Soft, User)
Color temperature| Adjust the color temperature of image display to a different setting (Normal, Warm, Cool, User)
Aspect ratio| Auto/4:3/16:9
Surround sound| On/Off
Sound mode| Standard, Music, Movie, User
Volume control| Volume +/-

Troubleshooting

Failed to turn on the projector by
pressing. g, the On/Dff button on the remote controller.| The remote controller has run out of battery.
There is strong light directly shining upon
the infrared receiving window on the projector.| Please replace it with 2Y.AAA b att eri es.
Please draw your curtains or move the light source away.
The projected image is not clear.| You didn’t turn le .f OCUS ‘Wheel tO @WEI/Eu.12
clearest focusing Effect.| T LI Ill the fo CL.15 Wheelto a proper position to a ch I eve the clearest focusing died.
The projected image has a white screen.| It is caused by electrostatic interference.| Press and hold the Dn/Cuff button for 5 seconds to make it normal.
The automatic keystone correction function doesn’t t work.| The automatic keystone correction function is,
off in the s-ettin. gs| Turn the automatic keystone correction function on in the settings-.
There is no sound when playing the Dolby sound effect.| The device doesn’t support the Dolbysound Effect.|
The mobile phone cannot connect to Es-hare.| Your phone is in a weak Wi-Fi signal coverage. There may be a connection problem if the Wi-Fi signal is weak.| Make sure the Wi-Fi.sienal is and
to. to connect to Share again.
Copyrighted contents from Nutflk
cannot be screencast and played by mobile phone [for both iDE and Android).| Due to Netflix copyrights, the third-party device doesn’t support playing.| Yournscreencast.cide 05 of ot hen. video platforms.
You al n not p erf arm Up / Down / Left / Right operations on the interface of Netflix or Amazon prime video via the remote controller.| The remote controller doesn’t support swiping the interface of Netflix or, Amazon prime video.| You need to swipe or click to enter the interface via the Mouse function of Share.

*Technical Specifications Power supply:

19V3A adapter Power consumption: 55Wmax Standby power consumption: 1W Display technology: Monolithic LCD Light source: LED Projected image size: 35-200inch Resolution: 1920.108013 Throw ratio: 135 Projection distance: 1.2-3.5m CPU: MAli-400MP2 RAM: 1GB ROM: 8GB Speaker: 3W”2 Wi-FI: Single frequency Wi-Fi Bluetooth version: 4.0 US B file system: FAT32 Built-in battery type: Lithium battery Recommended ambient temperature: 5-35°C Relative humidity: 30% Storage temperature and humidity:25°C ; 30% Dimensions: 137’107°146mm Weight 0.95KG (battery included: 1.1KG)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>